gnus-html.el (gnus-html-get-image-data): Search also for \r\n\r\n to get the start of data.
gnus-html.el: Use gnus-html-encode-url to encode URL.
gnus-sum.el (gnus-update-marks): Add sanity check to not delete marks outside the active range.
gnus.el: Try to keep the server/method cache unique.
gnus-html.el (gnus-html-rescale-image): Use window-inside-pixel-edges rather than window-pixel-edges.
gnus-html.el (gnus-html-put-image): Stop using markers.
gnus-html.el (gnus-html-image-fetched): Search also for \r\n\r\n to get the start of data.
nnimap.el: Expunge IMAP groups by default on article deletion.
gnus-int.el (gnus-request-expire-articles): Inhibit the daemon, since this command might take a while.
nnimap.el (nnimap-request-list): Set the current nnimap group to nil, since EXAMINE changes it on the server.
nnmail.el, nnimap.el: Allow nnimap to just delete 'junk messages when splitting.
nnimap.el (nnimap-parse-flags): Make IMAP flags parsing much faster by using `read'.
nnimap.el (nnimap-make-process-buffer): Record the server name.
gnus-html.el (gnus-html-image-fetched): Only cache if gnus-html-image-automatic-caching is set.
gnus-html.el (gnus-html-image-fetched): Check for errors.
gnus-start.el (gnus-read-active-for-groups): Only run -request-scan once per method on `g'.
nnimap.el (nnimap-request-expire-articles): If nnmail-expiry-wait is immediate, then expire all articles.
gnus-group.el (gnus-group-get-icon): Compute icon to return.
gnus-group.el (gnus-group-icon-list): Fix bad docstring information.
nnimap.el (nnimap-update-info): Fix up various off-by-one errors when syncing flags in nnimap.
time-date.el (date-to-time): Speed up date-to-time.
gnus-start.el (gnus-get-unread-articles): Don't have `gnus-get-unread-articles-in-group' update info.
gnus-group.el: Remove gnus-group-highlight-line from the default hook list.
gnus-group.el (gnus-group-highlight-line): Typo fix: beg, not start.
gnus-group.el (gnus-group-insert-group-line): Pass the real group name so that it gets the right data.
gnus-int.el (gnus-open-server): Add tracing for performance debugging.
nnimap.el (nnimap-parse-flags): Parse the data in any order.
nnimap.el (nnimap-update-info): Fix up code slightly.
Eli Zaretskii [Wed, 22 Sep 2010 16:03:34 +0000 (12:03 -0400)]
Fix some uses of int instead of EMACS_INT.
minibuf.c (Fminibuffer_contents)
(Fminibuffer_contents_no_properties)
(Fminibuffer_completion_contents): Use EMACS_INT for minibuffer
positions.
keyboard.c (command_loop_1): Use EMACS_INT to compare point with
mark.
alloc.c (make_uninit_string, make_uninit_multibyte_string)
(allocate_string_data): Accept EMACS_INT for string length.
editfns.c (Ffield_string, Ffield_string_no_properties)
(make_buffer_string, make_buffer_string_both, Fbuffer_substring)
(Fbuffer_substring_no_properties, find_field, Fdelete_field)
(Ffield_string, Ffield_string_no_properties, Ffield_beginning)
(Ffield_end): Use EMACS_INT for buffer positions.
insdel.c (prepare_to_modify_buffer): Use EMACS_INT to compare
point with mark.
lisp.h (allocate_string_data, make_uninit_string)
(make_uninit_multibyte_string, make_buffer_string)
(make_buffer_string_both): Adjust prototypes.
Rename libxml2 functions, and make parse tree format consistent with xml.el.
* xml.c: Switch to GNU indentation.
(make_dom): Change parse tree format to match xml.el.
(Fxml_parse_html_string_internal): Rename from html-parse-string.
(Fxml_parse_string_internal): Rename from xml-parse-string.
* configure.in: Announce whether libxml2 is linked to.
gnus-group.el (gnus-group-line-format-alist): Have the ?U (unseen) spec inserr "*" if the group isn't active instead of 0.
nnimap.el (nnimap-request-create-group): Implement.
nnimap.el: Use the IMAP version of utf7-encode throughout.
nnimap.el: Implement the nnimap article expunging interface method, and make it more general.
gnus-group.el: Put back the nnimap autoloads needed to do the acl stuff.
gnus-sum.el (gnus-summary-move-article): When respooling to the same method, this would bug out.
nnimap.el (nnimap-request-group): When we have zero articles, return the right data to Gnus.
nnimap.el (nnimap-request-expire-articles): Only delete articles immediately if the target is 'delete.
nnmail.el (nnmail-expired-article-p): Allow returning the cutoff time for oldness in addition to being a predicate.
nnimap.el: Implement nnimap expiry.
nnimap.el (nnimap-request-move-article): Request the article before looking at what the Message-ID is.
nnimap.el (nnimap-mark-and-expunge-incoming): Wait for the last sequence.
gnus-sum.el (gnus-summary-move-article): Use gnus-server-equal to find out whether methods are equal.
nnimap.el (nnimap-find-expired-articles): Don't refer to nnml-inhibit-expiry.
nnmail.el (nnmail-expired-article-p): Fix typo: time-subtract.
gnus-start.el (gnus-get-unread-articles): Fix the prefixed select method in the presence of many similar methods.
When we have several similar methods, try to create as few extended methods as possible.
gnus-sum.el (gnus-adjust-marked-articles): Hack to avoid adjusting marks for nnimap, which is seldom the right thing to do.
gnus-int.el (gnus-open-server): Give a better error message in the "go offline" case.
gnus-sum.el (gnus-adjust-marked-articles): Fix another typo.
nnml.el (nnml-generate-nov-file): Fix variable name clobbering from previous patch.
gnus-start.el (gnus-get-unread-articles): Get the extended method slightly later to avoid double-getting it.
Stefan Monnier [Tue, 21 Sep 2010 21:18:08 +0000 (23:18 +0200)]
* lisp/emacs-lisp/smie.el (smie-debug--describe-cycle): Fix typo.
(smie-indent-comment): Be more careful with comment-start-skip.
(smie-indent-comment-close, smie-indent-comment-inside): New funs.
(smie-indent-functions): Use them.
mail-parse.el (mail-header-encode-parameter): Use -encode-parameter instead of -encode-string.
nnimap.el (nnimap-fetch-inbox): Use "[]" as the parameter instead of "".
gnus-news.texi: Say what Emacs versions we support.
nnimap.el: Implement group deletion.
nnimap.el (nnimap-transform-headers): Return the size of the entire message in the Bytes header, not just the size of the first part.
gnus-news.texi: The nnimap makeover.
gnus-news.texi (Supported Emacs versions): Fix typo.
nnimap.el (nnimap-request-move-article): Fix article moving from nnimap to other servers.
nnimap.el (nnimap-request-set-mark): Don't wait for a response when we haven't requested anything.
nnimap.el (nnimap-command): Make sure that the error message doesn't error out.
Stefan Monnier [Mon, 20 Sep 2010 22:42:47 +0000 (00:42 +0200)]
* lisp/textmodes/reftex-parse.el (reftex-what-macro)
(reftex-context-substring): Let-bind forward-sexp-function to nil
since we don't need/want to treat \begin...\end as a block.
Stefan Monnier [Mon, 20 Sep 2010 14:22:16 +0000 (16:22 +0200)]
* lisp/progmodes/prolog.el (prolog-smie-forward-token)
(prolog-smie-backward-token): New functions.
(prolog-mode-variables): Use them to parse "!," correctly.
Set up smie-blink-matching for ".".
* test/indent/prolog.prolog: Use normal spacing around !.
Stefan Monnier [Mon, 20 Sep 2010 11:53:42 +0000 (13:53 +0200)]
* lisp/textmodes/ispell.el: Fix commenting convention.
(ispell-parse-output): Simplify, use push.
(ispell-region): Use match-string-no-properties.
(ispell-begin-skip-region-regexp): Use mapconcat to simplify.
(ispell-minor-mode): Use define-minor-mode.
(ispell-message): Remove unused var `skip-regexp'.
(ispell-add-per-file-word-list): Use dynamic let-binding.
Try and use the proper comment marker.
Dan Nicolaescu [Mon, 20 Sep 2010 11:38:50 +0000 (14:38 +0300)]
Remove HAVE_TERMIOS definitions.
* src/s/usg5-4-common.h (HAVE_TERMIOS):
* src/s/template.h (HAVE_TERMIOS):
* src/s/gnu-linux.h (HAVE_TERMIOS):
* src/s/darwin.h (HAVE_TERMIOS):
* src/s/cygwin.h (HAVE_TERMIOS):
* src/s/bsd-common.h (HAVE_TERMIOS):
* src/s/aix4-2.h (HAVE_TERMIOS):
* src/s/hpux10-20.h (HAVE_TERMIOS): Do not define, it is assumed
defined on all non-MS platforms.
(HAVE_PSTAT_GETDYNAMIC): Do not define, autoconf does it.
mail-parse.el (mail-header-encode-parameter): Define as rfc2045-encode-string.
nnheader.el (nnheader-insert-nov): Protect against junk appearing in the extra mail headers.
gnus-html.el: Prefetch and html washing additions.
gnus-html.el (gnus-html-prefetch-images): Fix up the url-retrieve calling conventions so that prefetch doesn't bug out.
Pass proper format strings to gnus-message.
nnimap.el: Allow anonymous login.
nnimap.el (nnimap-transform-headers): The chars header is called Chars not Bytes.
nnimap.el (nnimap-wait-for-response): Don't infloop if the IMAP connection drops.
gnus-start.el (gnus-get-unread-articles): Call `gnus-open-server' on each method before trying to scan them etc.
gnus-sum.el (gnus-summary-update-mark): Replace subst-char-in-region by subst-char-in-region.
gnus.el (gnus-similar-server-opened): Refactor a bit and add comments.
gnus.el: Fix a speed regression based in methods that were similar weren't the same.
gnus.el (gnus): When using the development version of Gnus, load the gnus-load file.
nnimap.el (nnimap-open-connection): When looking for credentials, also use the nnimap-server-port.
nnimap.el (nnimap-request-article): Return the group/article number, so that Gnus `^' works as expected.
nnimap.el (nnimap-find-wanted-parts-1): Return the MIME parts as IMAP wants them.
gnus-start.el (gnus-ignored-newsgroups): Remove [] from the list of bogus characters.
gnus-html.el (gnus-html-image-fetched): Protect against the data not arriving.
nnimap.el (nnimap-wait-for-connection): Avoid a race condition while waiting for the connection string.
gnus.texi (Required Back End Functions): Document INFO.
Stefan Monnier [Sun, 19 Sep 2010 14:52:37 +0000 (16:52 +0200)]
* lisp/emacs-lisp/smie.el (smie-bnf-precedence-table): Improve error message.
(smie-debug--prec2-cycle, smie-debug--describe-cycle): New functions.
(smie-prec2-levels): Use them to better diagnose precedence cycles.
(smie-blink-matching-check): Don't signal a mismatch if car is t.
(smie-blink-matching-open): Rewrite to remove assumptions, so that
something like "." can also be a closer.
(smie--associative-p, smie-indent--hanging-p, smie-indent--bolp)
(smie-indent--offset, smie-indent--offset-rule, smie-indent--column):
Rename internal functions to use "--". Update callers.
nnimap.el (nnimap-finish-retrieve-group-infos): Return data in the nntp buffer so the agent can save it.
nnimap.el (nnimap-open-shell-stream): Bind `process-connection-type' to nil, so that CRLF doesn't get translated to \n; (nnimap-open-connection): Don't make 'shell commands only send \n.
nnimap.el (nnimap-request-group): Don't make `M-g' bug out on group with no marks.
gnus-agent.el (gnus-agent-load-alist): Nix out the alist if the file doesn't exist.
nnimap.el (nnimap-finish-retrieve-group-infos): Protect against groups that have no articles.
nnimap.el (nnimap-request-article): Check that we really got an article when we requested one.
gnus-html.el (gnus-html-schedule-image-fetching): Ignore all errors from url-retrieve, for instance about invalid URLs.
gnus-agent.el: Change default of gnus-agent-auto-agentize-methods to nil.
Stefan Monnier [Sun, 19 Sep 2010 09:16:28 +0000 (11:16 +0200)]
* lisp/gnus/nnml.el (nnml-files): Add prefix to dynamic var `files'.
(nnml-generate-nov-databases-directory, nnml-generate-active-info):
Update var name.
(nnml-generate-nov-file): Use dolist.
(nnml-directory-articles, nnml-current-group-article-to-file-alist):
Use with-current-buffer.
Michael Mauger [Sun, 19 Sep 2010 02:11:18 +0000 (22:11 -0400)]
SQL Mode, Version 2.8 - sql-list-all and sql-list-table functions.
* progmodes/sql.el: Version 2.8
(sql-login-params): Updated widget structure; changes still
needed.
(sql-product-alist): Add :list-all and :list-table features for
SQLite, Postgres and MySQL products.
(sql-redirect): Handle default value.
(sql-execute, sql-execute-feature): New functions.
(sql-read-table-name): New function.
(sql-list-all, sql-list-table): New functions. User API
(sql-mode-map, sql-interactive-mode-map): Add key definitions
for above functions.
(sql-mode-menu, sql-interactive-mode-menu): Add menu definitions
for above functions.
(sql-postgres-login-params): Add user and database defaults.
(sql-buffer-live-p): Bug fix.
(sql-product-history); New variable.
(sql-read-product): New function. Use it.
(sql-set-product, sql-product-interactive): Use it.
(sql-connection-history): New variable.
(sql-read-connection): New function. Use it.
(sql-connect): New function.
(sql-for-each-login): Redesign function interface.
(sql-make-alternate-buffer-name, sql-save-connection): Use it.
(sql-get-login-ext, sql-get-login): Use it. Handle default values.
(sql-comint): Check for program. Existing live buffer.
(sql-comint-postgres): Add port parameter.
nnimap.el (nnimap-request-group): Use the stored info for the dont-check case.
nnimap.el: Use deffoo instead of defun for interface functions.
gnus-int.el (gnus-request-group): Take an optional `info' parameter.
nnimap.el: Allow nnimap-request-group to do a complete marks sync on `M-g'.
nnimap.el: Get credentials for numerical equivalents of the port numbers.
gnus-html.el (gnus-html-wash-tags): Add support for i, b and u HTML tags.
nnimap.el (nnimap-update-info): Extend the info so that we can set the marks.
nnimap.el (nnimap-open-connection): Fix typo -- should be 'shell, not 'stream.
nnimap.el: Allow PREAUTH nnimap connections to log in without credentials.
nnimap.el (nnimap-update-info): Fix off-by-one error when concatenating ranges when doing a partial update.
gnus-html.el (gnus-html-schedule-image-fetching): Use `url' rather than curl to retrieve images.
nnimap.el (nnimap-update-info): When doing partial marks update, get the range update right.
nnimap.el (nnimap-wait-for-response): Be a bit more lax in finding the end of the command we're looking for.
nnimap.el: Allow sending \n instead of \r\n on 'shell streams.
gnus-html.el (gnus-html-schedule-image-fetching): Fetch all images in parallel.
Stefan Monnier [Sat, 18 Sep 2010 16:21:16 +0000 (18:21 +0200)]
* lisp/indent.el (indent-according-to-mode): Apply syntax-propertize.
(indent-region): Use indent-according-to-mode.
* test/indent/octave.m: Remove one more `fixindent'. Use `end'.
Eli Zaretskii [Sat, 18 Sep 2010 14:13:09 +0000 (16:13 +0200)]
Fix MSDOS build broken by 2010-09-10T16:44:35Z!larsi@gnus.org, support MSDOS build with libxml2.
config.bat: Detect that libxml2 is installed and if so, build with it.
src/deps.mk (xml.o): Add dependencies.
msdos/sed1v2.inp (LIBXML2_LIBS, LIBXML2_CFLAGS): Edit to empty.
gnus-start.el (gnus-get-unread-articles): Allow the backends to update the group info. This makes the nndraft groups, for instance, go back to their old behaviour.
Eli Zaretskii [Sat, 18 Sep 2010 11:59:53 +0000 (13:59 +0200)]
Fix bug #7038 with cursor motion in paragraphs w/o strong characters.
xdisp.c (Fcurrent_bidi_paragraph_direction): Call
bidi_paragraph_init with NO_DEFAULT_P non-zero.
bidi.c (bidi_paragraph_init): Accept an additional argument
NO_DEFAULT_P; all callers changed. If NO_DEFAULT_P is non-zero,
search back until a paragraph with a strong directional character
is found, and use that to determine paragraph's base direction.
dispextern.h (bidi_paragraph_init): Update prototype.
Reimplement nnimap, and do tweaks to the rest of the code to support that.
* gnus-int.el (gnus-finish-retrieve-group-infos)
(gnus-retrieve-group-data-early): New functions.
* gnus-range.el (gnus-range-nconcat): New function.
* gnus-start.el (gnus-get-unread-articles): Support early retrieval of
data.
(gnus-read-active-for-groups): Support finishing the early retrieval of
data.
* gnus-sum.el (gnus-summary-move-article): Pass the move-to group name
if the move is internal, so that nnimap can do fast internal moves.
* gnus.el (gnus-article-special-mark-lists): Add uid/active tuples, for
nnimap usage.
* nnimap.el: Rewritten.
* nnmail.el (nnmail-inhibit-default-split-group): New internal variable
to allow the mail splitting to not return a default group. This is
useful for nnimap, which will leave unmatched mail in the inbox.
* utf7.el (utf7-encode): Autoload.
Implement shell connection.
* nnimap.el (nnimap-open-shell-stream): New function.
(nnimap-open-connection): Use it.
Get the number of lines by using BODYSTRUCTURE.
(nnimap-transform-headers): Get the number of lines in each message.
(nnimap-retrieve-headers): Query for BODYSTRUCTURE so that we get the
number of lines.
Not all servers return UIDNEXT. Work past this problem.
Remove junk from end of file.
Fix typo in "bogus" section.
Make capabilties be case-insensitive.
Require cl when compiling.
Don't bug out if the LIST command doesn't have any parameters.
2010-09-17 Knut Anders Hatlen <kahatlen@gmail.com> (tiny change)
* nnimap.el (nnimap-get-groups): Don't bug out if the LIST command
doesn't have any parameters.
Revert one line that was changed by mistake in the last checkin.
(nnimap-open-connection): Don't error out when we can't make a connection
nnimap-related changes to avoid bugging out if we can't contact a server.
* gnus-start.el (gnus-get-unread-articles): Don't try to scan groups
from methods that are denied.
* nnimap.el (nnimap-possibly-change-group): Return nil if we can't log
in.
(nnimap-finish-retrieve-group-infos): Make sure we're not waiting for
nothing.
* gnus-sum.el (gnus-select-newsgroup): Indent.
Stefan Monnier [Sat, 18 Sep 2010 00:35:00 +0000 (02:35 +0200)]
Fix and improve last syntax-propertize patch
* lisp/emacs-lisp/syntax.el (syntax-propertize-precompile-rules): New macro.
(syntax-propertize-rules): Add var-ref case. Fix offset computation
when adding surrounding \(..\).
* lisp/progmodes/fortran.el (fortran--font-lock-syntactic-keywords): Remove.
(fortran-make-syntax-propertize-function): New function; replaces
fortran-font-lock-syntactic-keywords.
(fortran-mode): Use it.
(fortran-line-length): Use it. Improve interactive spec.
* lisp/progmodes/js.el (js-mode): Fix last change (bug#7054).
* lisp/textmodes/tex-mode.el (tex-syntax-propertize-rules)
(latex-syntax-propertize-rules): New consts; replace
tex-font-lock-syntactic-keywords.
(tex-env-mark, latex-env-before-change): New functions.
(latex-electric-env-pair-mode): New minor mode.
(tex-font-lock-verb): Change arguments; do move point.
(tex-font-lock-syntactic-face-function): Adjust to new verbatim
representation as a form of comment.
(tex-font-lock-keywords-1): Remove workaround, now unneeded.
(doctex-syntax-propertize-rules): New const; replaces
doctex-font-lock-syntactic-keywords.
(tex-common-initialization, doctex-mode): Use syntax-propertize-rules.
Jan D [Fri, 17 Sep 2010 09:04:35 +0000 (11:04 +0200)]
Expose tool-bar pixel width to lisp and use it for speedbar (Bug#7048)
* dframe.el (dframe-reposition-frame-emacs): Use tool-bar-pixel-width
in calculating new frame position. Add more space between new and
parent on the left.
* frame.c (Ftool_bar_pixel_width): New function to expose tool
bar's pixel width to Lisp.