Paul Eggert [Mon, 17 Jan 2011 19:20:37 +0000 (11:20 -0800)]
Makefile.in: tidy up the building of lib
* Makefile.in (am--refresh): Mark as .PHONY.
(top_maintainer_clean): Don't remove lib/gnulib.mk m4/gnulib-cache.m4,
as they're not rebuilt unless you do a "make sync-from-gnulib"
and the former is needed for "configure".
(maintainer-clean): Don't recurse into lib, as "make bootstrap-clean"
has already removed lib/Makefile.
Paul Eggert [Mon, 17 Jan 2011 07:16:08 +0000 (23:16 -0800)]
* lisp.h: Redo flags and XSET slightly to avoid overflow diagnostics.
These changes make compilation easier to follow with Sun cc.
(ARRAY_MARK_FLAG): Make it signed, so that it can be assigned to
EMACS_INT values without provoking overflow diagnostics.
(PSEUDOVECTOR_FLAG): Likewise, for consistency.
(XSET) [! USE_LSB_TAG]: Use unsigned left shift to avoid overflow
diagnostic with signed left shift.
Tassilo Horn [Sun, 16 Jan 2011 20:41:25 +0000 (21:41 +0100)]
* strokes.el (strokes-read-stroke): Re-fill strokes buffer with
spaces if the frame was resized, so that the full visible buffer
serves as canvas for strokes.
Kevin Ryde [Sun, 16 Jan 2011 01:59:33 +0000 (17:59 -0800)]
info-xref.el Version 3.
* lisp/info-xref.el (info-xref-check, info-xref-check-all): Move
commentary details into docstrings for better visibility.
Use compilation-mode for the results buffer.
(info-xref-output, info-xref-output-error, info-xref-with-output)
(info-xref-filename, info-xref-in-progress):
New internals for this.
(info-xref-check-list, info-xref-check-buffer)
(info-xref-check-all-custom): Use those.
(info-xref-output-buffer): Rename from info-xref-results-buffer.
(info-xref-output-heading): Rename from info-xref-filename-heading.
(info-xref-good, info-xref-bad, info-xref-xfile-alist)
(info-xref-filename-heading): Move to output managing section.
(info-xref-docstrings): New command checking "Info node `(foo)Bar'"
(info-xref-lock-file-p, info-xref-with-file): New helpers for it.
(info-xref-subfile-p): Move to generic section with those two.
(info-xref-check-node): New function split from
info-xref-check-buffer, shared by info-xref-docstrings.
(info-xref-goto-node-p): Move to a checking section with that func.
(info-xref-unavail): New counter.
(info-xref-check-node): Use it.
(info-xref-with-output): Show count of unavailables at end of output.
(info-xref-all-info-files): Exclude ".*" dotfiles. Ignore broken
symlinks. Exclude .texi files. Exclude Emacs backup files.
(info-xref-check-all-custom): Fix quietening viper-mode and
gnus-registry-install -- use setq not let so as not to unbind after load.
Glenn Morris [Sat, 15 Jan 2011 20:38:27 +0000 (12:38 -0800)]
Merge from emacs-23 branch, up to 2010-05-20T21:33:58Z!juri@jurta.org.
Note:
emacs-23 2010-05-20T01:32:08Z!lekktu@gmail.com is rendered unnecessary by pre-existing 2010-05-20
trunk change.
Martin Rudalics [Sat, 15 Jan 2011 02:55:58 +0000 (21:55 -0500)]
Avoid crash in Fselect_frame due to null selected_window (Bug#7728).
* window.c (inhibit_point_swap): New variable.
(Fselect_window): If inhibit_point_swap is nonzero, avoid swapping
point this time.
(Fset_window_configuration): Set inhibit_point_swap to 1 instead
of setting selected_window to nil (Bug#7728).
Stefan Monnier [Fri, 14 Jan 2011 19:55:35 +0000 (14:55 -0500)]
* lisp/hexl.el (hexl-mode-old-*): Remove.
(hexl-mode--old-var-vals): New var to replace them.
(hexl-mode--minor-mode-p, hexl-mode--setq-local): New funs.
(hexl-mode, hexl-follow-line, hexl-activate-ruler):
Use them to set local vars.
(hexl-mode-exit): Use hexl-mode--old-var-vals to restore state.
(hexl-backward-short, hexl-backward-word, hexl-scroll-down)
(hexl-scroll-up, hexl-end-of-1k-page, hexl-end-of-512b-page): Simplify.
Paul Eggert [Fri, 14 Jan 2011 18:56:58 +0000 (10:56 -0800)]
* make-dist: Distribute test/ files too.
Distribute every file under test/ that is under version control,
using patterns like *.el to capture files that are added later.
Without this change, "configure" would fail, because it would
attempt to build from a Makefile.in that was not distributed.
Stefan Monnier [Fri, 14 Jan 2011 18:10:15 +0000 (13:10 -0500)]
* lisp/vc/smerge-mode.el: Resolve comment conflicts more aggressively.
(smerge-resolve--normalize-re): New var.
(smerge-resolve--extract-comment, smerge-resolve--normalize): New funs.
(smerge-resolve): Use them.
* lisp/newcomment.el (comment-only-p): New function.
(comment-or-uncomment-region): Use it.
Stefan Monnier [Fri, 14 Jan 2011 02:12:43 +0000 (21:12 -0500)]
* lisp/emacs-lisp/easymenu.el: Add :enable, and obey :label. Require CL.
(easy-menu-create-menu, easy-menu-convert-item-1):
Use :label rather than nil for labels. Use `case'.
Add :enable as alias for :active.
(easy-menu-binding): Obey :label.
Stefan Monnier [Thu, 13 Jan 2011 23:14:30 +0000 (18:14 -0500)]
Use run-mode-hooks for major mode hooks.
* lisp/textmodes/reftex-toc.el (reftex-toc-mode-map):
Rename from reftex-toc-map.
(reftex-toc-mode): Use define-derived-mode.
* lisp/textmodes/reftex-sel.el (reftex-select-shared-map): New map.
(reftex-select-label-mode-map, reftex-select-bib-mode-map):
Rename from reftex-select-(label|bib)-map. Move init into declaration.
(reftex-select-label-mode, reftex-select-bib-mode):
Use define-derived-mode.
* lisp/textmodes/reftex-index.el (reftex-index-phrases-mode-map)
(reftex-index-mode-map): Rename from reftex-index(-phrases)-map.
Move init into delcaration.
(reftex-index-mode, reftex-index-phrases-mode):
Use define-derived-mode.
* lisp/speedbar.el (speedbar-mode-syntax-table): Renaqme from
speedbar-syntax-table. Move init into declaration.
(speedbar-mode-map): Rename from speedbar-key-map.
Move init into declaration.
(speedbar-file-key-map): Move init into declaration.
(speedbar-mode): Use define-derived-mode.
* lisp/recentf.el (recentf-mode): Don't run hook (or message) redundantly.
* lisp/net/rcirc.el (rcirc-mode): Use run-mode-hooks.
* lisp/emacs-lisp/chart.el (chart-mode-map): Rename from chart-map.
(chart-face-list): Move initialization into declaration.
(chart-mode): Use define-derived-mode.
* lisp/calculator.el (calculator-mode-map): Move init into declaration.
(calculator-mode): Use define-derived-mode.
* lisp/cedet/srecode/srt-mode.el (srecode-template-mode):
Use define-derived-mode.
* lisp/cedet/semantic/symref/list.el (semantic-symref-results-mode):
Use run-mode-hooks.
* lisp/erc/erc.el (erc-mode):
* lisp/erc/erc-dcc.el (erc-dcc-chat-mode): Use define-derived-mode.
* lisp/org/org-remember.el (org-remember-mode):
* lisp/org/org-capture.el (org-capture-mode): Don't run hook redundantly.
Stefan Monnier [Thu, 13 Jan 2011 20:46:38 +0000 (15:46 -0500)]
* lisp/progmodes/prolog.el: Use syntax-propertize. Further code cleanup.
(prolog-use-prolog-tokenizer-flag): Change default when
syntax-propertize can be used.
(prolog-syntax-propertize-function): New var.
(prolog-mode-variables): Move make-local-variable into `set'.
Don't make comment-column local since we don't set it.
Set comment-add (as it was in previous prolog.el). Use dolist.
Set syntax-propertize-function.
(prolog-mode, prolog-inferior-mode):
Call prolog(-inferior)-menu directly, not through the mode-hook.
(prolog-buffer-module, prolog-indent-level)
(prolog-paren-is-the-first-on-line-p, prolog-paren-balance)
(prolog-comment-limits, prolog-goto-comment-column):
Use line-(end|beginning)-position.
(prolog-build-prolog-command): Tighten up regexp.
(prolog-consult-compile): Move make-local-variable into `set'.
(prolog-consult-compile-filter, prolog-goto-next-paren)
(prolog-help-on-predicate, prolog-clause-info)
(prolog-mark-predicate): Don't let+setq.
(prolog-indent-line): Use indent-line-to.
Only call prolog-goto-comment-column if necessary.
(prolog-indent-level): Use bobp.
(prolog-first-pos-on-line): Remove, not used any more.
(prolog-in-string-or-comment): Use syntax-ppss if available.
(prolog-help-on-predicate): Use read-string.
(prolog-goto-predicate-info): Simplify.
(prolog-read-predicate): Use `default' rather than `initial'.
(prolog-temporary-file): Use make-temp-file to close a security hole.
(prolog-toggle-sicstus-sd): New command.
(prolog-electric-underscore, prolog-variables-to-anonymous):
Use dynamic-scoping as it was meant.
(prolog-menu): Move menu definitions to top-level.
Use a toggle-button for Sicstus's source debugger.
Change "Code" to the more usual "Prolog", and hence change "Prolog"
to "System".
(prolog-inferior-menu): Reuse prolog-menu's help menu.
Move other menu definition to top-level.
Tassilo Horn [Thu, 13 Jan 2011 20:17:15 +0000 (21:17 +0100)]
(doc-view-initiate-display): Fall back to normal mode when
doc-view-mode cannot be enabled, also when extracting the document
text into a separate buffer (bug#6446).
Kim F. Storm [Thu, 13 Jan 2011 16:26:40 +0000 (17:26 +0100)]
* ido.el (ido-may-cache-directory): Move "too-big" check later.
(ido-next-match, ido-prev-match): Fix stray reordering of matching
items when cycling through the matches.
Chong Yidong [Thu, 13 Jan 2011 04:23:41 +0000 (23:23 -0500)]
New arg RETURN-ACTION for compose-mail, and related functions.
* lisp/mail/sendmail.el (mail-return-action): New var.
(mail-mode): Make it buffer-local.
(mail-bury): Obey it. Move special Rmail window handling to
rmail-mail-return.
(mail, mail-setup): New arg RETURN-ACTION.
(sendmail-user-agent-compose): Move from simple.el.
* lisp/simple.el (sendmail-user-agent-compose): Move to sendmail.el.
(compose-mail): New arg RETURN-ACTION.
(compose-mail-other-window, compose-mail-other-frame): Likewise.
* lisp/gnus/gnus-msg.el (gnus-msg-mail): New arg RETURN-ACTION. Pass it to
message-mail.
* lisp/gnus/message.el (message-mail): New arg RETURN-ACTION.
(message-return-action): New var.
(message-bury): Use it.
(message-mode): Make it buffer-local.
(message-send-and-exit): Always call message-bury.
(message-tool-bar-gnome): Tweak tool-bar items. Add :vert-only tags.
* lisp/mail/rmail.el (rmail-mail-return): New function.
(rmail-start-mail): Pass it to compose-mail.
* lisp/mh-e/mh-comp.el (mh-user-agent-compose): New arg RETURN-ACTION.