From: Gerd Moellmann Date: Mon, 16 Oct 2000 12:27:33 +0000 (+0000) Subject: *** empty log message *** X-Git-Tag: emacs-pretest-21.0.90~847 X-Git-Url: http://git.eshelyaron.com/gitweb/?a=commitdiff_plain;h=76eebffc1e94dc746760898cf75929878eb9fdf7;p=emacs.git *** empty log message *** --- diff --git a/etc/3B-MAXMEM b/etc/3B-MAXMEM deleted file mode 100644 index 91cf81c85a3..00000000000 --- a/etc/3B-MAXMEM +++ /dev/null @@ -1,75 +0,0 @@ -Date: Mon, 16 Feb 87 15:04:41 EST -From: katinsky@gauss.rutgers.edu (David Katinsky) -To: rms@prep.ai.mit.edu -Subject: 3b2 procedure to raise MAXMEM - -Below is the procedure I followed to allow enough memory for GnuEmacs to run -on my 3b2/400. The end result of this is that a process can snarf up to 2Mb -of memory. This can be a bit dangerous on a 2Mb machine, but I tried it and -it worked ok. - -------------------------------------------------------------------------------- - -In the simplest case, these are the procedures to reconfigure a 3bx kernel. - - - -1] cd /etc/master.d - -`ls` shows the files to be: - -README ctc* hdelog idisk ipc iuart kernel mau -mem msg ports* prf sem shm stubs sxt -sys xt - -2] Edit the file which contains the parameter[s] you wish to change. -In the following excerpt from /etc/master.d/kernel the value MAXMEM -was raised from 256 to 1024. - -In V.3.0 and later releases, the parameter in question is MAXUMEM -instead of MAXMEM. - - - * - * The following entries form the tunable parameter table. - * - - - NCALL = 30 - NPROC = 60 - NTEXT = 58 - NCLIST = 188 - * maxmem is number of pages (2K) was 256 --dmk - MAXMEM = 1024 - MAXUP = 25 - * hashbuf must be a power of 2 - NHBUF = 128 - NPBUF = 8 - -3] cd /boot - -4] mkboot -k KERNEL - -5] shutdown -i5 -g0 -y - -This will take the machine down and bring it back up into firmware -mode. When you see that the machine has reached this state, type the -firmware password (default=mcp). The machine will ask for the name of -a program to execute. At this prompt enter /etc/system . The machine -should start to boot and display its configuration data. - - - -8701271222 dmk - - [katinsky@topaz.rutgers.edu] -------------------------------------------------------------------------------- - - - -I do not feel that having the default firmware password is a -problem... but if you wish to edit it out, feel free. - - dmk - - diff --git a/etc/AIX.DUMP b/etc/AIX.DUMP deleted file mode 100644 index 66abc1dfa97..00000000000 --- a/etc/AIX.DUMP +++ /dev/null @@ -1,221 +0,0 @@ -The following text was written by someone at IBM to describe an older -version of the code for dumping on AIX. It does NOT apply to -the current version of Emacs. It is included in case someone -is curious. - - -I (rms) couldn't understand the code, and I can't fully understand -this text either. I rewrote the code to use the same basic -principles, as far as I understood them, but more cleanly. This -rewritten code does not always work. In fact, the basic method -seems to be intrinsically flawed. - -Since then, someone else implemented a different way of dumping on -the RS/6000, which does seem to work. None of the following -applies to the way Emacs now dumps on the 6000. However, the -current method fails to use shared libraries. Anyone who might be -interested in trying to resurrect the previous method might still -find the following information useful. - - -It seems that the IBM dumping code was simply set up to detect when -the dumped data cannot be used, and in that case to act approximately -as if CANNOT_DUMP had been defined all along. (This is buried in -paragraph 1.) It seems simpler just to define CANNOT_DUMP, since -Emacs is not set up to decide at run time whether there is dumping or -not, and doing so correctly would be a lot of work. - -Note that much of the other information, such as the name and format -of the dumped data file, has been changed. - - - --rms - - - - A different approach has been taken to implement the -"dump/load" feature of GNU Emacs for AIX 3.1. Traditionally the -unexec function creates a new a.out executable file which contains -preloaded Lisp code. Executing the new a.out file (normally called -xemacs) provides rapid startup since the standard suite of Lisp code -is preloaded as part of the executable file. - - AIX 3.1 architecture precludes the use of this technique -because the dynamic loader cannot guarantee a fixed starting location -for the process data section. The loader loads all shared library -data BEFORE process data. When a shared library changes its data -space, the process initial data section address (_data) will change -and all global process variables are automatically relocated to new -addresses. This invalidates the "dumped" Emacs executable which has -data addresses which are not relocatable and now corrupt. Emacs would -fail to execute until rebuilt with the new libraries. - - To circumvent the dynamic loader feature of AIX 3.1, the dump process -has been modified as follows: - - 1) A new executable file is NOT created. Instead, both pure and - impure data are saved by the dump function and automatically - reloaded during process initialization. If any of the saved data - is unavailable or invalid, loadup.el will be automatically loaded. - - 2) Pure data is defined as a shared memory segment and attached - automatically as read-only data during initialization. This - allows the pure data to be a shared resource among all Emacs - processes. The shared memory segment size is PURESIZE bytes. - If the shared memory segment is unavailable or invalid, a new - shared memory segment is created and the impure data save file - is destroyed, forcing loadup.el to be reloaded. - - 3) The ipc key used to create and access Emacs shared memory is - SHMKEY and can be overridden by the environment symbol EMACSSHMKEY. - Only one ipc key is allowed per system. The environment symbol - is provided in case the default ipc key has already been used. - - 4) Impure data is written to the ../bin/.emacs.data file by the - dump function. This file contains the process' impure data - at the moment of load completion. During Emacs initialization, - the process' data section is expanded and overwritten - with the .emacs.data file contents. - - The following are software notes concerning the GNU Emacs dump function under AIX 3.1: - - 1) All of the new dump/load code is activated by the #ifdef SHMKEY - conditional. - - 2) The automatic loading of loadup.el does NOT cause the dump function - to be performed. Therefore once the pure/impure data is discarded, - someone must remake Emacs to create the saved data files. This - should only be necessary when Emacs is first installed or whenever - AIX is upgraded. - - 3) Emacs will exit with an error if executed in a non-X environment - and the dump function was performed within a X window. Therefore - the dump function should always be performed in a non-X - environment unless the X environment will ALWAYS be available. - - 4) Emacs only maintains the lower 24 bits of any data address. The - remaining upper 8 bits are reset by the XPNTR macro whenever any - Lisp object is referenced. This poses a serious problem because - pure data is stored in segment 3 (shared memory) and impure data - is stored in segment 2 (data). To reset the upper 8 address bits - correctly, XPNTR must guess as to which type of data is represented - by the lower 24 address bits. The technique chosen is based upon - the fact that pure data offsets in segment 3 range from - 0 -> PURESIZE-1, which are relatively small offsets. Impure data - offsets in segment 2 are relatively large (> 0x40000) because they - must follow all shared library data. Therefore XPNTR adds segment - 3 to each data offset which is small (below PURESIZE) and adds - segment 2 to all other offsets. This algorithm will remain valid - as long as a) pure data size remains relatively small and b) process - data is loaded after shared library data. - - To eliminate this guessing game, Emacs must preserve the 32-bit - address and add additional data object overhead for the object type - and garbage collection mark bit. - - 5) The data section written to .emacs.data is divided into three - areas as shown below. The file header contains four character - pointers which are used during automatic data loading. The file's - contents will only be used if the first three addresses match - their counterparts in the current process. The fourth address is - the new data segment address required to hold all of the preloaded - data. - - - .emacs.data file format - - +---------------------------------------+ \ - | address of _data | \ - +---------------------------------------+ \ - | address of _end | \ - +---------------------------------------+ file header - | address of initial sbrk(0) | / - +---------------------------------------+ / - | address of final sbrk(0) | / - +---------------------------------------+ / - \ \ - \ \ - all data to be loaded from - _data to _end - \ \ - \ \ - +---------------------------------------+ - \ \ - \ \ - all data to be loaded from - initial to final sbrk(0) - \ \ - +---------------------------------------+ - - - Sections two and three contain the preloaded data which is - restored at locations _data and initial sbrk(0) respectively. - - The reason two separate sections are needed is that process - initialization allocates data (via malloc) prior to main() - being called. Therefore _end is several kbytes lower than - the address returned by an initial sbrk(0). This creates a - hole in the process data space and malloc will abort if this - region is overwritten during the load function. - - One further complication with the malloc'd space is that it - is partially empty and must be "consumed" so that data space - malloc'd in the future is not assigned to this region. The malloc - function distributed with Emacs anticipates this problem but the - AIX 3.1 version does not. Therefore, repeated malloc calls are - needed to exhaust this initial malloc space. How do you know - when malloc has exhausted its free memory? You don't! So the - code must repeatedly call malloc for each buffer size and - detect when a new memory page has been allocated. Once the new - memory page is allocated, you can calculate the number of free - buffers in that page and request exactly that many more. Future - malloc requests will now be added at the top of a new memory page. - - One final point - the initial sbrk(0) is the value of sbrk(0) - after all of the above malloc hacking has been performed. - - - The following Emacs dump/load issues need to be addressed: - - 1) Loadup.el exits with an error message because the xemacs and - emacs-xxx files are not created during the dump function. - - Loadup.el should be changed to check for the new .emacs.data - file. - - 2) Dump will only support one .emacs.data file for the entire - system. This precludes the ability to allow each user to - define his/her own "dumped" Emacs. - - Add an environment symbol to override the default .emacs.data - path. - - 3) An error message "error in init file" is displayed out of - startup.el when the dumped Emacs is invoked by a non-root user. - Although all of the preloaded Lisp code is present, the important - purify-flag has not been set back to Qnil - precluding the - loading of any further Lisp code until the flag is manually - reset. - - The problem appears to be an access violation which will go - away if the read-write access modes to all of the files are - changed to rw-. - - 4) In general, all file access modes should be changed from - rw-r--r-- to rw-rw-rw-. They are currently setup to match - standard AIX access modes. - - 5) The dump function is not invoked when the automatic load of - loadup.el is performed. - - Perhaps the command arguments array should be expanded with - "dump" added to force an automatic dump. - - 6) The automatic initialization function alloc_shm will delete - the shared memory segment and .emacs.data file if the "dump" - command argument is found in ANY argument position. The - dump function will only take place in loadup.el if "dump" - is the third or fourth command argument. - - Change alloc_shm to live by loadup.el rules. - diff --git a/etc/ChangeLog b/etc/ChangeLog index 46d1b5be54b..95f7d6442aa 100644 --- a/etc/ChangeLog +++ b/etc/ChangeLog @@ -4,6 +4,8 @@ * tasks.texi: Updated to the version from /gd/gnuorg. + * FTP: Refer to the GNU web site. + 2000-10-13 John Wiegley * NEWS: Added a note about Eshell. diff --git a/etc/FTP b/etc/FTP index 43cdaf45112..45048af4160 100644 --- a/etc/FTP +++ b/etc/FTP @@ -1,236 +1,2 @@ - -*- text -*- -How to get GNU Software by Internet FTP or by UUCP. Last updated 1999-01-20 - -* Please send improvements to this file to gnu@gnu.org. - -* No Warranties - -We distribute software in the hope that it will be useful, but without -any warranty. No author or distributor of this software accepts -responsibility to anyone for the consequences of using it or for -whether it serves any particular purpose or works at all, unless he -says so in writing. This is exactly the same warranty that the commercial -software companies offer: None. If the distribution is incomplete or the -media fails, you can always download a replacement from any of the GNU -mirrors, free of charge. - -* Updates - -A possibly more up-to-date list of GNU FTP sites is at - http://www.gnu.org/order/ftp.html - -* How to FTP - -Use the ftp program on your system (ask locally if you can't find it) -to connect to the host you are ftping from. Unless indicated -otherwise, login in as user "anonymous", with password: "your e-mail -address" and set "binary" mode (to transfer all eight bits in each -byte). - -ALWAYS USE BINARY/IMAGE MODE TO TRANSFER THESE FILES! -Text mode does not work for tar files or compressed files. - -* GNU Software and How To FTP It - -GNU software is available on ftp.gnu.org under the directory /gnu. -diff files to convert between versions exist for some of these -programs. Some programs have misc support files as well. Have a look -on ftp.gnu.org to see which ones. In most cases, the tar or diff -files are compressed with the `gzip' program; this is indicated with -the .gz suffix. - -Descriptions of GNU software are available at - http://www.gnu.org/software/software.html - -* Alternative Internet FTP Sources - -Please do NOT use a site outside your country, until you have checked -all sites inside your country, and then your continent. Trans-ocean -TCP/IP links are very expensive and usually very low speed. - -The canonical GNU ftp site is located at ftp.gnu.org/gnu. -You should probably use one of the many mirrors of that site - the -mirrors will be less busy, and you can find one closer to your site. - -* GNU FTP Site Mirror List - -United States: - - -California - labrea.stanford.edu/pub/gnu, gatekeeper.dec.com/pub/GNU -Hawaii - ftp.hawaii.edu/mirrors/gnu -Illinois - uiarchive.cso.uiuc.edu/pub/gnu (Internet address 128.174.5.14) -Kentucky - ftp.ms.uky.edu/pub/gnu -Maryland - ftp.digex.net/pub/gnu (Internet address 164.109.10.23) -Massachusetts - aeneas.mit.edu/pub/gnu -Michigan - gnu.egr.msu.edu/pub/gnu -Missouri - wuarchive.wustl.edu/systems/gnu -New Mexico - ftp.cs.unm.edu/mirrors/gnu -New York - ftp.cs.columbia.edu/archives/gnu/prep -Ohio - ftp.cis.ohio-state.edu/mirror/gnu -Tennessee - ftp.skyfire.net/pub/gnu -Virginia - ftp.uu.net/archive/systems/gnu -Washington - ftp.nodomainname.net/pub/mirrors/gnu - -Africa: - -South Africa - ftp.sun.ac.za/gnu - -The Americas: - -Brazil - ftp.unicamp.br/pub/gnu -Brazil - master.softaplic.com.br/pub/gnu -Brazil - linuxlabs.lci.ufrj.br/gnu -Canada - ftp.cs.ubc.ca/mirror2/gnu -Chile - ftp.inf.utfsm.cl/pub/gnu (Internet address 146.83.198.3) -Costa Rica - sunsite.ulatina.ac.cr/GNU -Mexico - ftp.uaem.mx/pub/gnu - -Australia: - -Australia - archie.au/gnu (archie.oz or archie.oz.au for ACSnet) -Australia - ftp.progsoc.uts.edu.au/pub/gnu -Australia - mirror.aarnet.edu.au/pub/gnu - -Asia: - -Japan - tron.um.u-tokyo.ac.jp/pub/GNU/prep -Japan - ftp.cs.titech.ac.jp/pub/gnu -Korea - cair-archive.kaist.ac.kr/pub/gnu (Internet address 143.248.186.3) -Saudi Arabia - ftp.isu.net.sa/pub/mirrors/prep.ai.mit.edu/ -Taiwan - ftp.edu.tw/UNIX/gnu/ -Taiwan - ftp.nctu.edu.tw/UNIX/gnu/ -Taiwan - ftp1.sinica.edu.tw/pub3/GNU/gnu/ -Thailand - ftp.nectec.or.th/pub/mirrors/gnu (Internet address - 192.150.251.32) - -Europe: - -Austria - ftp.univie.ac.at/packages/gnu -Austria - gd.tuwien.ac.at/gnu/gnusrc -Belgium - ftp.be.gnu.org/ -Austria - http://gd.tuwien.ac.at/gnu/gnusrc/ -Czech Republic - ftp.fi.muni.cz/pub/gnu/ -Denmark - ftp.denet.dk/mirror/ftp.gnu.org/pub/gnu -Denmark - ftp.dkuug.dk/pub/gnu/ -Finland - ftp.funet.fi/pub/gnu -France - ftp.univ-lyon1.fr/pub/gnu -France - ftp.irisa.fr/pub/gnu -Germany - ftp.informatik.tu-muenchen.de/pub/comp/os/unix/gnu/ -Germany - ftp.informatik.rwth-aachen.de/pub/gnu -Germany - ftp.de.uu.net/pub/gnu -Greece - ftp.forthnet.gr/pub/gnu -Greece - ftp.ntua.gr/pub/gnu -Greece - ftp.aua.gr/pub/mirrors/GNU (Internet address 143.233.187.61) -Hungary - ftp.kfki.hu/pub/gnu -Ireland - ftp.esat.net/pub/gnu (Internet address 193.120.14.241) -Italy - ftp.oasi.gpa.it/pub/gnu -Netherlands - ftp.eu.net/gnu (Internet address 192.16.202.1) -Netherlands - ftp.nluug.nl/pub/gnu -Netherlands - ftp.win.tue.nl/pub/gnu (Internet address 131.155.70.19) -Norway - ftp.ntnu.no/pub/gnu (Internet address 129.241.11.142) -Poland - ftp.task.gda.pl/pub/gnu -Portugal - ftp.ci.uminho.pt/pub/mirrors/gnu -Portugal - http://ciumix.ci.uminho.pt/mirrors/gnu/ -Portugal - ftp.ist.utl.pt/pub/gnu -Russia - ftp.chg.ru/pub/gnu/ -Slovenia - ftp.arnes.si/pub/software/gnu -Spain - ftp.etsimo.uniovi.es/pub/gnu -Sweden - ftp.isy.liu.se/pub/gnu -Sweden - ftp.stacken.kth.se -Sweden - ftp.luth.se/pub/unix/gnu -Sweden - ftp.sunet.se/pub/gnu (Internet address 130.238.127.3) - Also mirrors the Mailing List Archives. -Sweden - swamp.ios.chalmers.se/pub/gnu/ -Switzerland - ftp.eunet.ch/mirrors4/gnu -Switzerland - sunsite.cnlab-switch.ch/mirror/gnu (Internet address 193.5.24.1) -United Kingdom - ftp.mcc.ac.uk/pub/gnu (Internet address 130.88.203.12) -United Kingdom - unix.hensa.ac.uk/mirrors/gnu -United Kingdom - ftp.warwick.ac.uk (Internet address 137.205.192.14) -United Kingdom - SunSITE.doc.ic.ac.uk/gnu (Internet address 193.63.255.4) - -* How to FTP GNU Emacs - -Emacs is in the directory /gnu/emacs on ftp.gnu.org. The emacs -distribution itself has a filename in the form emacs-M.N.tar.gz, where -M and N stand for the version numbers; the Emacs Lisp Reference Manual -is in a separate file, named elisp-manual-NN.tar.gz. - -* Scheme and How to FTP It - -The latest distribution version of C Scheme is available via anonymous FTP -from swiss-ftp.ai.mit.edu in /pub/scheme-X.X/ (where X.X is some version -number). - -Read the files INSTALL and README in the top level C Scheme directory. - -* TeX and How to Obtain It - -We don't distribute TeX now, but it is free software. - -TeX is a document formatter that is used, among other things, by the FSF -for all its documentation. You will need it if you want to make printed -manuals. - -TeX is freely redistributable. You can get it by ftp, tape, or CD/ROM. - -** For FTP instructions, retrieve the file -ftp.cs.umb.edu/pub/tex/unixtex.ftp. (We don't include it here because it -changes relatively frequently. Sorry.) - -** A minimal TeX collection (enough to process Texinfo files, anyway) -is included on the GNU source CD-ROM. See the file ORDERS in this -directory for more information. - -* VMS FTP sites with GNU Software -You can anonymously ftp a VMS version of GNU emacs from: - - ftp.vms.stacken.kth.se:[.GNU-VMS] - GNU Emacs and some other VMS -ports (and some VMS binaries) of GNU software - - mango.rsmas.miami.edu has a VMS version of the GCC/G++ compiler. -Contact angel@flipper.miami.edu (angel li) for details. - - RIGEL.EFD.LTH.SE [130.235.48.3] - GNU Emacs - -* Getting GNU software in Great Britain - -jpo@cs.nott.ac.uk is willing to distribute those GNU sources he has -available. The smaller items are available from the info-server (send -to info-server@cs.nott.ac.uk); the larger items by negotiation. Due to -communication costs this service is only available within the UK. - -BattenIG@computer-science.birmingham.ac.uk (aka -I.G.Batten@fulcrum.bt.co.uk) is also willing to distribute those GNU -sources he has. - -wizards@doc.ic.ac.uk is willing to distribute those GNU sources they have -along with most other freely distributable software. The SunSITE archive -on SunSITE.doc.ic.ac.uk (193.63.255.4) is available via ftp, http, fsp, -gopher, NFS and Lanmanger over IP (SMB), and telnet. - -UK sites with just anonymous FTP access are in the above list. - -* Getting GNU software via UUCP - -OSU is distributing via UUCP: most GNU software, MIT C Scheme, -Compress, News, RN, NNTP, Patch, some Appletalk stuff, some of the -Internet Requests For Comment (RFC) et al.. See their periodic -postings on the Usenet newsgroup comp.sources.d for informational -updates. Current details from or -<...!osu-cis!staff>. - -Information on how to uucp some GNU programs is available via -electronic mail from: uunet!hutch!barber, hqda-ai!merlin, acornrc!bob, -hao!scicom!qetzal!upba!ugn!nepa!denny, ncar!noao!asuvax!hrc!dan, -bigtex!james (aka james@bigtex.cactus.org), oli-stl!root, -src@contrib.de (Germany), toku@dit.co.jp (Japan) and info@ftp.uu.net. - -* If You Like The Software - -If you like the software developed and distributed by the Free -Software Foundation, please express your satisfaction with a donation. -Your donations will help to support the Foundation and make our future -efforts successful, including a complete development and operating -system, called GNU (Gnu's Not Unix), which will run Unix user -programs. For more information on GNU and the Foundation, contact us -at the above address, or see our web site at http://www.gnu.org. - -Ordering a GNU Source Code CD-ROM or Source Code CD-ROM Subscription -is a good way for your organization to help support our work. +Please refer to for information +about obtaining Emacs. diff --git a/etc/SUN-SUPPORT b/etc/SUN-SUPPORT deleted file mode 100644 index b53872975d7..00000000000 --- a/etc/SUN-SUPPORT +++ /dev/null @@ -1,210 +0,0 @@ -NOTE: the Free Software Foundation agreed to put this file, and the -programs it describes, into the Emacs distribution ONLY on the -condition that we would not lift a finger to maintain them! We are -willing to *pass along* support for Sun windows, but we are not -willing to let it distract us from what we are trying to do. If you -have complaints or suggestions about Sun windows support, send them to -peck@sun.com, who is the maintainer. - - -The interface between GNU Emacs and Sun windows consists of the program -etc/emacstool, the Lisp programs lisp/sun-*.el and lisp/term/sun.el, -and the C source file src/sunfns.c. It is documented with a man page, -etc/emacstool.1. - -To enable use of these files and programs, define the configuration -switch HAVE_SUN_WINDOWS in src/config.h before compiling Emacs. -The definition of HAVE_SUN_WINDOWS must precede the #include m-sun3.h -or #include m-sun4.h. -If you must change PURESIZE, do so after the #include m-sun3.h - -This software is based on SunView for Sun UNIX 4.2 Release 3.2, -and will not work "as is" on previous releases, eg 3.0 or 3.1. - -Using Emacstool with GNU Emacs: - - The GNU Emacs files lisp/term/sun.el, lisp/sun-mouse.el, -lisp/sun-fns.el, and src/sunfns.c provide emacs support for the -Emacstool and function keys. If your terminal type is SUN (that is, -if your environment variable TERM is set to SUN), then Emacs will -automatically load the file lisp/term/sun.el. This, in turn, will -ensure that sun-mouse.el is autoloaded when any mouse events are -detected. It is suggested that sun-mouse and sun-fns be -included in your site-init.el file, so that they will always be loaded -when running on a Sun workstation. [Increase PURESIZE to 154000]. - - Support for the Sun function keys requires disconnecting the standard -Emacs command Meta-[. Therefore, the function keys are supported only -if you do (setq sun-esc-bracket t) in your .emacs file. - - The file src/sunfns.c defines several useful functions for emacs on -the Sun. Among these are procedures to pop-up SunView menus, put and -get from the SunView selection [STUFF] buffer, and a procedure for -changing the cursor icon. If you want to define cursor icons, try -using the functions in lisp/sun-cursors.el. - - The file lisp/sun-mouse.el includes a mass of software for defining -bindings for mouse events. Any function can be called or any form -evaluated as a result of a mouse event. If you want a pop-up menu, -your function can call sun-menu-evaluate. This will bring up a -SunView walking menu of your choice. - - Use the macro (defmenu menu-name &rest menu-items) to define menu -objects. Each menu item is a cons of ("string" . VALUE), VALUE is -evaluated when the string item is picked. If VALUE is a menu, then a -pullright item is created. - - This version also includes support for copying to and from the -sun-windows "stuff" selection. The keyboard bindings defined in -lisp/sun-fns.el let you move the current region to the "STUFF" -selection and vice versa. Just set point with the left button, set -mark with the middle button, (the region is automatically copied to -"STUFF") then switch to a shelltool, and "Stuff" will work. Going the -other way, the main right button menu contains a "Stuff Selection" -command that works just like in shelltool. [The Get and Put function -keys are also assigned to these functions, so you don't need the mouse -or even emacstool to make this work.] - - Until someone write code to read the textsw "Selection Shelf", it is -not possible to copy directly from a textsw to emacs, you must go through -the textsw "STUFF" selection. - - The Scroll-bar region is not a SunView scrollbar. It really should -be called the "Right-Margin" region. The scroll bar region is basically -the rightmost five columns (see documentation on variable scrollbar-width). -Mouse hits in this region can have special bindings, currently those binding -effect scrolling of the window, and so are referred to as the "Scroll-bar" -region. - - For information on what mouse bindings are in effect, use the command -M-x Describe-mouse-bindings, or the quick pop-up menu item "Mouse-Help". - - -GNU Emacs EXAMPLES: - See definitions in lisp/sun-fns.el for examples. - - You can redefine the cursor that is displayed in the emacs window. -On initialization, it is set to a right arrow. See lisp/sun-cursors.el -for additional cursors, how to define them, how to edit them. - -BUGS: - It takes a few milliseconds to create a menu before it pops up. -Someone who understands the GNU Garbage Collector might see if it -is possible for defmenu to create a SunView menu struct that does -not get destroyed by Garbage Collection. - - An outline of the files used to support Sun Windows and the mouse. - -etc/SUN-SUPPORT. - This document. - -etc/emacstool.1: - Added: an nroff'able man page for emacstool. - -etc/emacstool.c: - Encodes all the function keys internally, and passes non-window -system arguments to emacs. - -etc/emacs.icon: - The "Kitchen Sink" GNU Emacs icon. - -src/sunfns.c: - This contains the auxiliary functions that allow elisp code to interact -with the sunwindows, selection, and menu functions. - -lisp/sun-mouse.el: - Defines the lisp function which is called when a mouse hit is found -in the input queue. This handler decodes the mouse hit via a keymap-like -structure sensitive to a particular window and where in the window the -hit occurred (text-region, right-margin, mode-line). Three variables -are bound (*mouse-window* *mouse-x* *mouse-y*) and the selected function -is called. - See documentation on "define-mouse" or look at lisp/sun-fns.el -to see how this is done. - Defines two functions to pass between region and sun-selection - Defines functions for interfacing with the Menu. -During menu evaluation, the variables *menu-window* *menu-x* *menu-y* are bound. - -lisp/sun-fns.el - The definition of the default menu and mouse function bindings. - -lisp/sun-cursors.el - Defines a number of alternate cursors, and an editor for them. - The editor is also a demonstration of mouse/menu utilization. - -lisp/term/sun.el - Sets up the keymap to make the sun function keys do useful things. -Also includes the setup/initialization code for running under emacstool, -which makes "\C-Z" just close the emacstool window (-WI emacs.icon). - - Jeff Peck, Sun Microsystems, Inc - - -Subject: Making multi-line scrolling really work: - -In your .defaults file, include the line: -/Tty/Retained "Yes" -That way, the terminal emulator can do text moves using bitblt, -instead of repaint. - -If that's not enough for you, then tell unix and emacs that -the sun terminal supports multi-line and multi-character insert/delete. -Add this patch to your /etc/termcap file: - -*** /etc/termcap.~1~ Mon Sep 15 12:34:23 1986 ---- /etc/termcap Mon Feb 9 17:34:08 1987 -*************** -*** 32,39 **** ---- 32,40 ---- - Mu|sun|Sun Microsystems Workstation console:\ - :am:bs:km:mi:ms:pt:li#34:co#80:cl=^L:cm=\E[%i%d;%dH:\ - :ce=\E[K:cd=\E[J:so=\E[7m:se=\E[m:rs=\E[s:\ - :al=\E[L:dl=\E[M:im=:ei=:ic=\E[@:dc=\E[P:\ -+ :AL=\E[%dL:DL=\E[%dM:IC=\E[%d@:DC=\E[%dP:\ - :up=\E[A:nd=\E[C:ku=\E[A:kd=\E[B:kr=\E[C:kl=\E[D:\ - :k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\ - :k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z: - M-|sun-nic|sune|Sun Microsystems Workstation console without insert character:\ - - -If you don't have the program "patch", just add the line: - :AL=\E[%dL:DL=\E[%dM:IC=\E[%d@:DC=\E[%dP:\ - -casetek@crvax.sri.com says: - -Those of you using GNU Emacs on Sun workstations under -3.2 may be interested in reducing memory utilization in -the emacstool via the Sun toolmerge facility. The technique -is described in the Release 3.2 Manual starting on page -71. The following is a summary of how it would apply -to merging emacstool into the basetools. - -1) Change the main procedure declaration in emacstool.c to: - - #ifdef SUN_TOOLMERGE - emacstool_main (argc, argv); - #else - main (argc, argv) - #endif - - This will allow creation of either standard or toolmerge - versions. - -2) Copy emacstool.o into directory /usr/src/sun/suntool. -3) make CFLAGS="-g -DSUN_TOOLMERGE" emacstool.o -4) Add the following line to basetools.h - - "emacstool",emacstool_main, - -5) Add the following line to toolmerge.c. - - extern emacstool_main(); - -6) make basetools MOREOBJS="emacstool.o" -7) make install_bins - -To invoke the toolmerged version, you must exit suntools and -re-start it. Make sure that /usr/bin occurs before the directory -in which you installed the standard (non-toolmerged) version. - - diff --git a/etc/tasks.texi b/etc/tasks.texi index 0d1423c9a50..fc68fbbfe04 100644 --- a/etc/tasks.texi +++ b/etc/tasks.texi @@ -3,7 +3,7 @@ @setfilename tasks.info @settitle GNU Task List @c This date is automagically updated when you save this file: -@set lastupdate November 1, 1999 +@set lastupdate October 11, 2000 @c %**end of header @setchapternewpage off @@ -77,6 +77,11 @@ to improve performance. Users who use the new functionality will appreciate it very much, if they use it; but even when they benefit from a performance improvement, they may not consider it very important. +Finally, if you think of an important job that free software cannot +solve yet that is typically solved by proprietary software, please send +a short description of that job to @email{tasks@@gnu.org} so that we can +add it to this task list. + @node Highest Priority, Documentation, Intro, Top @chapter Highest Priority @@ -89,6 +94,11 @@ But if you would like to work on what we need most, here is a list of high priority projects. @itemize @bullet + +@item +A new maintainer is needed for Goose +@url{http://www.gnu.org/software/goose/goose.html}. + @item If you are good at writing documentation, please do that. @@ -108,7 +118,7 @@ Web. @uref{ftp://ftp.gnu.org/pub/gnu/tasks/tasks.hurd}, via anonymous FTP. @item -@email{gnu@@gnu.org} via e-mail. +@email{gvc@@gnu.org} via e-mail. @end itemize @@ -117,6 +127,10 @@ If you are a Scheme fan, you can help develop Guile. Please have a look at the URL @uref{http://www.gnu.org/software/guile/guile.html} and then contact the Guile developers at @email{guile@@gnu.org}. +@item +Improve the facilities for translating other languages into Scheme, +so that Guile can provide support for a variety of languages. + @item A package to convert programs written using MS Access into Scheme, making use of a free data base system and the GTK toolkit. @@ -131,6 +145,11 @@ Help develop software to emulate Windows NT on top of GNU systems. For example, you could help work on Willows Twin. See @uref{http://www.willows.com/}. +@item +Add gettext support to GNU programs that don't have it already. (Please +contact the developers of the specific packages that you want to work +on.) + @ignore The Kermit developers say they will provide a free program to do this. @item @@ -226,10 +245,13 @@ A coherent free reference manual for Perl. Most of the Perl on-line reference documentation can be used as a starting point, but work is needed to weld them together into a coherent manual. +@ignore +@c Bradley Kuhn is working on this. @item A good free Perl language tutorial introduction. The existing Perl introductions are published with restrictions on copying and modification, so that they cannot be part of a GNU system. +@end ignore @item A manual for PIC (the graphics formatting language). @@ -249,7 +271,7 @@ Reference cards for those manuals that don't have them: C Compiler, Make, Texinfo, Termcap, and maybe the C Library. @item -Many utilities need documentation, including @code{grep} and others. +Many utilities still need documentation. @end itemize @node Unix-Related Projects, Kernel Projects, Documentation, Top @@ -266,6 +288,13 @@ Modify the GNU @code{dc} program to use the math routines of GNU Less urgent: make a replacement for the ``writer's workbench'' program @code{style}, or something to do the same kind of job. Compatibility with Unix is not especially important for this program. + +@item +Rewrite @code{indent} from scratch to make it cleaner. + +@item +Write a free software replacement for the @code{agrep} program. + @end itemize @node Kernel Projects, Extensions, Unix-Related Projects, Top @@ -345,9 +374,7 @@ An @code{nroff} macro package to simplify @code{texi2roff}. A queueing system for the mailer Smail that groups pending work by destination rather than by original message. This makes it possible to schedule retries coherently for each destination. Talk to -@email{tron@@veritas.com} about this. - -Smail also needs a new chief maintainer. +@email{tron@@veritas.com} and @email{woods@@weird.com} about this. @item Enhanced cross-reference browsing tools. (We now have something at @@ -363,21 +390,26 @@ about the level of @code{cxref}.) We also could use something like An emulator for Macintosh graphics calls on top of X Windows. @item -A package that emulates the API of Visual C++, but operates on top of -X11. It need not match the screen appearance of Visual C++. Instead, -it would be best to use GTK, so as to give coherence with GNOME. +A package that emulates the API of Visual C++'s Foundation Classes +(MFC), but operates on top of X11. It need not match the screen +appearance provided by MFC. Instead, it would be best to use GTK, so as +to give coherence with GNOME. + +@ignore +@c GNOME Basic is doing this @item A compatible replacement for Visual Basic, running on top of X11. It need not match the screen appearance of Visual C++. Instead, it would be best to use GTK, so as to give coherence with GNOME. +@end ignore +@ignore +@c Denemo is doing this. @item A music playing and editing system. This should work with LilyPond, a GNU program for music typesetting. - -@item -An ear-training program for students of music. +@end ignore @ignore @c GNUskies should do this @item @@ -385,9 +417,14 @@ An ephemeris program to replace xephem (which is, alas, too restricted to qualify as free software). @end ignore +@c Gepetto (@url{http://laurent.riesterer.free.fr/gepetto/intro-main.html}, +@c @email{laurent.riesterer@@free.fr}), according to @email{gnueval@@gnu.org}, +@c does the job of displaing dancers but does not allow editing notation. + @item A program to edit dance notation (such as labanotation) and display -dancers moving on the screen. +dancers moving on the screen. Gepetto done some of this work. Contact +@email{gvc@@gnu.org} if you are interested in helping finish the job. @item Make sure the Vibrant toolkit works with LessTif instead of Motif. @@ -400,8 +437,10 @@ A two-dimensional outliner program, which lets you draw graph structures of textual items, and then display them in various ways. +@ignore @c done @item A program for graphic morphing of scanned photographs. +@end ignore @item Software for designing and printing business cards. @@ -435,32 +474,25 @@ US citizens, to avoid problems with US export control law. @itemize @bullet @item -A free library for public-key encryption. - -This library should use the Diffie-Helman algorithm for public key -encryption, not the RSA algorithm, because the Diffie-Helman patent in -the US expired in 1997. This library can probably be developed from -the code for the GNU Privacy Guard (now in development). - +A free library for public-key encryption. This library can probably be +developed from the code for the GNU Privacy Guard. + @item -An implementation of SSLv3 (more precisely, TLSv1) which is patent-free -(uses the non-RSA algorithms) and has distribution terms compatible with -the GNU GPL. We know of a GPL-covered implemention of a version of SSL -that you can use as a starting point. +An implementation of SSLv3 (more precisely, TLSv1) which has +distribution terms compatible with the GNU GPL. We know of a +GPL-covered implemention of a version of SSL that you can use as a +starting point. @item Free software for doing secure commercial transactions on the web. This too needs public key encryption. @end itemize -The projects to provide free replacements for PGP and SSH are no longer -listed here, because projects to do those jobs are well under way. - @node Other Projects, Languages, Encryption Projects, Top @chapter Other Projects If you think of others that should be added, please -send them to @email{gnu@@gnu.org}. +send them to @email{tasks@@gnu.org}. @itemize @bullet @ignore OpenBIOS is doing this @@ -478,19 +510,13 @@ some of them). However, there may be a need to configure certain data in the computer in a way that is specific to each model of computer. @end ignore -@ignore Frank Cruz promises a free version -@item -A free program that can transfer files on a serial line -using the same protocol that Kermit uses. -@end ignore - @item An imitation of Page Maker or Ventura Publisher. @item An imitation of @code{dbase2} or @code{dbase3}. (How dbased!) -@uref{http://www.startech.keller.tx.us/xbase/xbase.html} may contain -some useful stuff to start with. +Harbour, a free replacement for Clipper, would provide a useful start. +@uref{http://www.harbour-project.org/}. @ignore @c being done by Jonas etc. @item @@ -545,12 +571,16 @@ about siff (which is, unfortunately, not free software) at A free replacement for the semi-free Qt library. @end ignore +@ignore +@c Ogg Vorbis is doing this, see @url{http://www.xiph.org/ogg/vorbis/index.html} or contact @email{Monty }. + @item High-quality music compression software. -(Talk with @email{phr@@netcom.com} for relevant suggestions.) +(Talk with @email{mt@@sulaco.org} for relevant suggestions.) Unfortunately we cannot implement the popular MP3 format due to patents, so this job includes working out some other non-patented format and compression method. +@end ignore @item A program to play sound distributed in ``Real Audio'' format. @@ -566,10 +596,12 @@ Programs to handle audio in RTSP format. An MPEG III audio encoder/decoder (but it is necessary to check, first, whether patents make this impossible). -@c Chris Hofstader is working on this. +@c Chris Hofstader is working on a non-Festival speech-generation program. +@c Mario Lang reports that Festival needs only +@c to be 2-5 times faster to work well with Emacspeak. @item -Speech-generation programs (there is a program from Brown U that you -could improve). +Speech-generation programs that are faster than the Festival engine. +This might be done by optimizing Festival. @c We have a project now. @item @@ -595,9 +627,6 @@ learn more. More scientific mathematical subroutines. (A clone of SPSS is being written already.) -@item -Statistical tools. - @item A scientific data collection and processing tool, perhaps something like Scientific Workbench and/or Khoros, @@ -607,20 +636,33 @@ A program to calculate properties of molecules by solving the Schroedinger equation. @item -Software to replace card catalogues in libraries. +Software to replace card catalogs in libraries. @item A simulator for heating and air conditioning systems for buildings. +@ignore +@c Pat Deegan @email{pat@@psychogenic.com} is working on this. +@c no URL yet, the status is updated in @file{volunteers} + +@item +A program for voting and tabulating election results. + +@end ignore + @item A package for editing genealogical records conveniently. This could perhaps be done as a Gnome program, or perhaps as an Emacs extension. +@ignore +@c ToutDoux aims to do this. + @item A project-scheduling package that accepts a list of project sub-tasks with their interdependencies, and generates Gantt charts and Pert charts and all the other standard project progress reports. +@end ignore @item Grammar and style checking programs. @@ -628,25 +670,25 @@ Grammar and style checking programs. @item A diagnostic program to test a hard disk. -@item -A fast emulator for the i386, which would make it possible -to emulate x86 code on other CPUs, and also to more easily -debug kernels such as Linux more conveniently. - -To make this faster, it could work by translating machine instructions -into the machine language of the host machine. - @item Optical character recognition programs; especially if suitable for scanning documents with multiple fonts and capturing font info as well as character codes. Work is being done on this, but more help is needed. +@c Some of the OCR work being done: +@c Luis Cearra , http://lem.eui.upm.es/ocre.html +@c The status of these projects is updated in @file{/gd/gnuorg/volunteers} + @item A program to scan a line drawing and convert it to Postscript. @item A program to recognize handwriting. +@item +A program that can translate from one natural language, into another. +For example, a program to translate French into English. + @item A pen based interface. @@ -656,6 +698,16 @@ CAD software, such as a vague imitation of Autocad. @item A program to receive data from a serial-line tap to facilitate the reverse-engineering of communication protocols. + +@item +A database program designed to store and retrieve patent information. + +@item +A free software package to run on a Palm Pilot in place of its usual +software, doing more or less the usual jobs. (Linux, the kernel, has +apparently been ported, but according to what we hear this port is not +useful yet.) + @end itemize @node Languages, Games and Recreations, Other Projects, Top @@ -676,9 +728,7 @@ finger -l fortran@@gnu.org We would like to have translators from various languages into Scheme. These languages include TCL, Python, Perl, Java, Javascript, and Rexx. - -We would like to have an implementation of Clipper, perhaps a GCC front -end, and perhaps a translator into Scheme. +Perhaps Clipper as well. @node Games and Recreations, , Languages, Top @chapter Games and Recreations @@ -704,6 +754,9 @@ software does not yet exist. A Hierarchical Task Network package which can be used to program play the computer's side in various strategic games. +@item +A game like Mill/Nine Men's Morris. + @item Write imitations of some popular video games: @@ -726,8 +779,6 @@ then watch it explore a world. @item Biomorph evolution (as in Scientific American and @cite{The Blind Watchmaker}). -@item -A program to display effects of moving at relativistic speeds. @end itemize @end itemize @@ -736,6 +787,17 @@ We do not need @code{rogue}, as we have @code{hack}. @contents @bye +@c LocalWords: dir texi lastupdate uref http www org html helpgnu ifinfo ftp +@c LocalWords: dvi hurd toc gvc URL GTK XmHTML xs nl ripley NT com gettext Qt +@c LocalWords: GUI libstdc Docbook SGML libc sed STL Gforth GNUstep TCSH Perl +@c LocalWords: Ghostscript PIC GCC Texinfo grep dc bc ethernet GDB IP CIFS CU +@c LocalWords: SMB SVGA Khoros Automake OpenStep diff roff Smail tron veritas +@c LocalWords: cxref ctrace API LilyPond xephem labanotation LessTif outliner +@c LocalWords: Hypercard morphing SeeMe ICQ Diffie Helman RSA SSLv TLSv GPL +@c LocalWords: OpenBIOS BIOS LILO dbase dbased Harbour harbour WYSIWYG ISBN +@c LocalWords: TruePrint Baecker siff sif cs arizona edu TR ps mt sulaco MP +@c LocalWords: RTSP MPEG jasonw ariel ucs unimelb AU stutz dsl TCL Javascript +@c LocalWords: Rexx GnuGo jhall isd Biomorph regexp eval gd gnuorg Local variables: update-date-leading-regexp: "@c This date is automagically updated when you save this file:\n@set lastupdate " update-date-trailing-regexp: "" diff --git a/lisp/ChangeLog b/lisp/ChangeLog index 64a92d8c8d6..1d67a157e23 100644 --- a/lisp/ChangeLog +++ b/lisp/ChangeLog @@ -1,3 +1,16 @@ +2000-10-16 Gerd Moellmann + + * eshell/esh-var.el, eshell/esh-util.el, eshell/esh-test.el, + * eshell/esh-proc.el, eshell/esh-opt.el, eshell/esh-mode.el, + * eshell/esh-maint.el, eshell/esh-io.el, eshell/esh-ext.el, + * eshell/esh-cmd.el, eshell/esh-arg.el, eshell/em-xtra.el, + * eshell/em-unix.el, eshell/em-term.el, eshell/em-smart.el, + * eshell/em-script.el, eshell/em-rebind.el, eshell/em-prompt.el, + * eshell/em-pred.el, eshell/em-ls.el, eshell/em-hist.el, + * eshell/em-glob.el, shell/em-dirs.el, eshell/em-cmpl.el, + * eshell/em-basic.el, eshell/em-banner.el, eshell/em-alias.el: + Add author information. + 2000-10-16 Miles Bader * toolbar/up_arrow.xpm, toolbar/right_arrow.xpm: