From: Glenn Morris Date: Tue, 10 Apr 2012 06:54:43 +0000 (-0700) Subject: In doc/emacs, use @file for buffers, per the Texinfo manual. X-Git-Tag: emacs-24.0.96~116 X-Git-Url: http://git.eshelyaron.com/gitweb/?a=commitdiff_plain;h=1c64e6ed6dd93b012659bc025e0d9329d92e9089;p=emacs.git In doc/emacs, use @file for buffers, per the Texinfo manual. It renders the same as @samp, so there is no visible change in most cases. --- diff --git a/doc/emacs/ChangeLog b/doc/emacs/ChangeLog index 4c96fff8e2d..f81e2157e51 100644 --- a/doc/emacs/ChangeLog +++ b/doc/emacs/ChangeLog @@ -1,5 +1,12 @@ 2012-04-10 Glenn Morris + * abbrevs.texi, arevert-xtra.texi, buffers.texi, building.texi: + * cmdargs.texi, custom.texi, entering.texi, files.texi, frames.texi: + * glossary.texi, help.texi, macos.texi, maintaining.texi, mini.texi: + * misc.texi, package.texi, programs.texi, screen.texi, search.texi: + * sending.texi, text.texi, trouble.texi: + Use @file for buffers, per the Texinfo manual. + * entering.texi (Entering Emacs): Do not mention initial-buffer-choice = t. diff --git a/doc/emacs/abbrevs.texi b/doc/emacs/abbrevs.texi index f3b272c359d..a8a34e62c1f 100644 --- a/doc/emacs/abbrevs.texi +++ b/doc/emacs/abbrevs.texi @@ -261,12 +261,12 @@ expands to itself, and save it to your abbrev file. @kbd{M-x edit-abbrevs} allows you to add, change or kill abbrev definitions by editing a list of them in an Emacs buffer. The list has the same format described above. The buffer of abbrevs is called -@samp{*Abbrevs*}, and is in Edit-Abbrevs mode. Type @kbd{C-c C-c} in +@file{*Abbrevs*}, and is in Edit-Abbrevs mode. Type @kbd{C-c C-c} in this buffer to install the abbrev definitions as specified in the buffer---and delete any abbrev definitions not listed. The command @code{edit-abbrevs} is actually the same as -@code{list-abbrevs} except that it selects the buffer @samp{*Abbrevs*} +@code{list-abbrevs} except that it selects the buffer @file{*Abbrevs*} whereas @code{list-abbrevs} merely displays it in another window. @node Saving Abbrevs diff --git a/doc/emacs/arevert-xtra.texi b/doc/emacs/arevert-xtra.texi index 4032c0b9882..55d7646542d 100644 --- a/doc/emacs/arevert-xtra.texi +++ b/doc/emacs/arevert-xtra.texi @@ -93,8 +93,8 @@ deleting or changing marks or flags will mark it modified again. Remote Dired buffers are not auto-reverted (because it may be slow). Neither are Dired buffers for which you used shell wildcards or file -arguments to list only some of the files. @samp{*Find*} and -@samp{*Locate*} buffers do not auto-revert either. +arguments to list only some of the files. @file{*Find*} and +@file{*Locate*} buffers do not auto-revert either. @c FIXME? This should be in the elisp manual? @node Supporting additional buffers diff --git a/doc/emacs/buffers.texi b/doc/emacs/buffers.texi index d0ec1103580..d2783bcb0ba 100644 --- a/doc/emacs/buffers.texi +++ b/doc/emacs/buffers.texi @@ -11,7 +11,7 @@ the file's text. Each time you invoke Dired, a buffer is used to hold the directory listing. If you send a message with @kbd{C-x m}, a buffer is used to hold the text of the message. When you ask for a -command's documentation, that appears in a buffer named @samp{*Help*}. +command's documentation, that appears in a buffer named @file{*Help*}. Each buffer has a unique name, which can be of any length. When a buffer is displayed in a window, its name is shown in the mode line @@ -19,7 +19,7 @@ buffer is displayed in a window, its name is shown in the mode line matters in buffer names. Most buffers are made by visiting files, and their names are derived from the files' names; however, you can also create an empty buffer with any name you want. A newly started Emacs -has several buffers, including one named @samp{*scratch*}, which can +has several buffers, including one named @file{*scratch*}, which can be used for evaluating Lisp expressions and is not associated with any file (@pxref{Lisp Interaction}). @@ -198,7 +198,7 @@ CRM Buffer Size Mode File @end smallexample @noindent -The buffer @samp{*Help*} was made by a help request (@pxref{Help}); it +The buffer @file{*Help*} was made by a help request (@pxref{Help}); it is not visiting any file. The buffer @code{src} was made by Dired on the directory @file{~/cvs/emacs/src/}. You can list only buffers that are visiting files by giving the command a prefix argument, as in @@ -248,9 +248,9 @@ happens and no renaming is done. @kbd{M-x rename-uniquely} renames the current buffer to a similar name with a numeric suffix added to make it both different and unique. This command does not need an argument. It is useful for creating -multiple shell buffers: if you rename the @samp{*shell*} buffer, then +multiple shell buffers: if you rename the @file{*shell*} buffer, then do @kbd{M-x shell} again, it makes a new shell buffer named -@samp{*shell*}; meanwhile, the old shell buffer continues to exist +@file{*shell*}; meanwhile, the old shell buffer continues to exist under its new name. This method is also good for mail buffers, compilation buffers, and most Emacs features that create special buffers with particular names. (With some of these features, such as @@ -354,7 +354,7 @@ operations on buffers, through an interface similar to Dired @findex buffer-menu @findex buffer-menu-other-window To use the buffer menu, type @kbd{C-x C-b} and switch to the window -displaying the @samp{*Buffer List*} buffer. You can also type +displaying the @file{*Buffer List*} buffer. You can also type @kbd{M-x buffer-menu} to open the buffer menu in the selected window. Alternatively, the command @kbd{M-x buffer-menu-other-window} opens the buffer menu in another window, and selects that window. @@ -409,11 +409,11 @@ Quit the buffer menu---immediately display the most recent formerly visible buffer in its place. @item @key{RET} @itemx f -Immediately select this line's buffer in place of the @samp{*Buffer +Immediately select this line's buffer in place of the @file{*Buffer List*} buffer. @item o Immediately select this line's buffer in another window as if by -@kbd{C-x 4 b}, leaving @samp{*Buffer List*} visible. +@kbd{C-x 4 b}, leaving @file{*Buffer List*} visible. @item C-o Immediately display this line's buffer in another window, but don't select the window. @@ -422,7 +422,7 @@ Immediately select this line's buffer in a full-screen window. @item 2 Immediately set up two windows, with this line's buffer selected in one, and the previously current buffer (aside from the buffer -@samp{*Buffer List*}) displayed in the other. +@file{*Buffer List*}) displayed in the other. @item b Bury the buffer listed on this line. @item m @@ -448,19 +448,19 @@ the inclusion of such buffers in the buffer list. suitable buffer, and turn on Buffer Menu mode in it. Everything else described above is implemented by the special commands provided in Buffer Menu mode. One consequence of this is that you can switch from -the @samp{*Buffer List*} buffer to another Emacs buffer, and edit -there. You can reselect the @samp{*Buffer List*} buffer later, to +the @file{*Buffer List*} buffer to another Emacs buffer, and edit +there. You can reselect the @file{*Buffer List*} buffer later, to perform the operations already requested, or you can kill it, or pay no further attention to it. - Normally, the buffer @samp{*Buffer List*} is not updated + Normally, the buffer @file{*Buffer List*} is not updated automatically when buffers are created and killed; its contents are just text. If you have created, deleted or renamed buffers, the way -to update @samp{*Buffer List*} to show what you have done is to type +to update @file{*Buffer List*} to show what you have done is to type @kbd{g} (@code{revert-buffer}). You can make this happen regularly every @code{auto-revert-interval} seconds if you enable Auto Revert mode in this buffer, as long as it is not marked modified. Global -Auto Revert mode applies to the @samp{*Buffer List*} buffer only if +Auto Revert mode applies to the @file{*Buffer List*} buffer only if @code{global-auto-revert-non-file-buffers} is non-@code{nil}. @iftex @inforef{Autorevert,, emacs-xtra}, for details. diff --git a/doc/emacs/building.texi b/doc/emacs/building.texi index 2f977c7d923..61ddc283e31 100644 --- a/doc/emacs/building.texi +++ b/doc/emacs/building.texi @@ -44,7 +44,7 @@ messages and show you where the errors occurred. @table @kbd @item M-x compile Run a compiler asynchronously under Emacs, with error messages going to -the @samp{*compilation*} buffer. +the @file{*compilation*} buffer. @item M-x recompile Invoke a compiler with the same command as in the last invocation of @kbd{M-x compile}. @@ -57,7 +57,7 @@ Kill the running compilation subprocess. compile}. This reads a shell command line using the minibuffer, and then executes the command by running a shell as a subprocess (or @dfn{inferior process}) of Emacs. The output is inserted in a buffer -named @samp{*compilation*}. The current buffer's default directory is +named @file{*compilation*}. The current buffer's default directory is used as the working directory for the execution of the command; normally, therefore, compilation takes place in this directory. @@ -72,19 +72,19 @@ specified is automatically stored in the variable type @kbd{M-x compile}. A file can also specify a file-local value for @code{compile-command} (@pxref{File Variables}). - Starting a compilation displays the @samp{*compilation*} buffer in + Starting a compilation displays the @file{*compilation*} buffer in another window but does not select it. While the compilation is running, the word @samp{run} is shown in the major mode indicator for -the @samp{*compilation*} buffer, and the word @samp{Compiling} appears -in all mode lines. You do not have to keep the @samp{*compilation*} +the @file{*compilation*} buffer, and the word @samp{Compiling} appears +in all mode lines. You do not have to keep the @file{*compilation*} buffer visible while compilation is running; it continues in any case. When the compilation ends, for whatever reason, the mode line of the -@samp{*compilation*} buffer changes to say @samp{exit} (followed by +@file{*compilation*} buffer changes to say @samp{exit} (followed by the exit code: @samp{[0]} for a normal exit), or @samp{signal} (if a signal terminated the process). If you want to watch the compilation transcript as it appears, -switch to the @samp{*compilation*} buffer and move point to the end of +switch to the @file{*compilation*} buffer and move point to the end of the buffer. When point is at the end, new compilation output is inserted above point, which remains at the end. Otherwise, point remains fixed while compilation output is added at the end of the @@ -93,7 +93,7 @@ buffer. @cindex compilation buffer, keeping point at end @vindex compilation-scroll-output If you change the variable @code{compilation-scroll-output} to a -non-@code{nil} value, the @samp{*compilation*} buffer scrolls +non-@code{nil} value, the @file{*compilation*} buffer scrolls automatically to follow the output. If the value is @code{first-error}, scrolling stops when the first error appears, leaving point at that error. For any other non-@code{nil} value, @@ -103,22 +103,22 @@ scrolling continues until there is no more output. To rerun the last compilation with the same command, type @kbd{M-x recompile}. This reuses the compilation command from the last invocation of @kbd{M-x compile}. It also reuses the -@samp{*compilation*} buffer and starts the compilation in its default +@file{*compilation*} buffer and starts the compilation in its default directory, which is the directory in which the previous compilation was started. @findex kill-compilation Starting a new compilation also kills any compilation already -running in @samp{*compilation*}, as the buffer can only handle one +running in @file{*compilation*}, as the buffer can only handle one compilation at any time. However, @kbd{M-x compile} asks for confirmation before actually killing a compilation that is running. You can also kill the compilation process with @kbd{M-x kill-compilation}. To run two compilations at once, start the first one, then rename -the @samp{*compilation*} buffer (perhaps using @code{rename-uniquely}; +the @file{*compilation*} buffer (perhaps using @code{rename-uniquely}; @pxref{Misc Buffer}), then switch buffers and start the other -compilation. This will create a new @samp{*compilation*} buffer. +compilation. This will create a new @file{*compilation*} buffer. @vindex compilation-environment You can control the environment passed to the compilation command @@ -133,7 +133,7 @@ variable settings override the usual ones. @cindex Compilation mode @cindex mode, Compilation @cindex locus - The @samp{*compilation*} buffer uses a major mode called Compilation + The @file{*compilation*} buffer uses a major mode called Compilation mode. Compilation mode turns each error message in the buffer into a hyperlink; you can move point to it and type @key{RET}, or click on it with the mouse (@pxref{Mouse References}), to visit the @dfn{locus} of @@ -145,10 +145,10 @@ position in a file where that error occurred. If you change the variable @code{compilation-auto-jump-to-first-error} to a non-@code{nil} value, Emacs automatically visits the locus of the first error message that -appears in the @samp{*compilation*} buffer. +appears in the @file{*compilation*} buffer. Compilation mode provides the following additional commands. These -commands can also be used in @samp{*grep*} buffers, where the +commands can also be used in @file{*grep*} buffers, where the hyperlinks are search matches rather than error messages (@pxref{Grep Searching}). @@ -190,7 +190,7 @@ mode buffer. The first time you invoke it after a compilation, it visits the locus of the first error message. Each subsequent @w{@kbd{C-x `}} visits the next error, in a similar fashion. If you visit a specific error with @key{RET} or a mouse click in the -@samp{*compilation*} buffer, subsequent @w{@kbd{C-x `}} commands +@file{*compilation*} buffer, subsequent @w{@kbd{C-x `}} commands advance from there. When @w{@kbd{C-x `}} finds no more error messages to visit, it signals an error. @w{@kbd{C-u C-x `}} starts again from the beginning of the compilation buffer, and visits the first locus. @@ -199,8 +199,8 @@ the beginning of the compilation buffer, and visits the first locus. through errors in the opposite direction. The @code{next-error} and @code{previous-error} commands don't just -act on the errors or matches listed in @samp{*compilation*} and -@samp{*grep*} buffers; they also know how to iterate through error or +act on the errors or matches listed in @file{*compilation*} and +@file{*grep*} buffers; they also know how to iterate through error or match lists produced by other commands, such as @kbd{M-x occur} (@pxref{Other Repeating Search}). If you are already in a buffer containing error messages or matches, those are the ones that are @@ -224,7 +224,7 @@ highlights the relevant source line. The duration of this highlight is determined by the variable @code{next-error-highlight}. @vindex compilation-context-lines - If the @samp{*compilation*} buffer is shown in a window with a left + If the @file{*compilation*} buffer is shown in a window with a left fringe (@pxref{Fringes}), the locus-visiting commands put an arrow in the fringe, pointing to the current error message. If the window has no left fringe, such as on a text-only terminal, these commands scroll @@ -276,7 +276,7 @@ Names}). command, but specifies the option for a noninteractive shell. This means, in particular, that the shell should start with no prompt. If you find your usual shell prompt making an unsightly appearance in the -@samp{*compilation*} buffer, it means you have made a mistake in your +@file{*compilation*} buffer, it means you have made a mistake in your shell's init file by setting the prompt unconditionally. (This init file may be named @file{.bashrc}, @file{.profile}, @file{.cshrc}, @file{.shrc}, etc., depending on what shell you use.) The shell init @@ -339,14 +339,14 @@ mode (@pxref{Compilation Mode}). @item M-x grep @itemx M-x lgrep Run @command{grep} asynchronously under Emacs, listing matching lines in -the buffer named @samp{*grep*}. +the buffer named @file{*grep*}. @item M-x grep-find @itemx M-x find-grep @itemx M-x rgrep Run @command{grep} via @code{find}, and collect output in the -@samp{*grep*} buffer. +@file{*grep*} buffer. @item M-x zrgrep -Run @code{zgrep} and collect output in the @samp{*grep*} buffer. +Run @code{zgrep} and collect output in the @file{*grep*} buffer. @item M-x kill-grep Kill the running @command{grep} subprocess. @end table @@ -369,7 +369,7 @@ can chain @command{grep} commands, like this: grep -nH -e foo *.el | grep bar | grep toto @end example - The output from @command{grep} goes in the @samp{*grep*} buffer. You + The output from @command{grep} goes in the @file{*grep*} buffer. You can find the corresponding lines in the original files using @w{@kbd{C-x `}}, @key{RET}, and so forth, just like compilation errors. @@ -1506,14 +1506,14 @@ commands are used; its default is @code{t}. @section Lisp Interaction Buffers @findex lisp-interaction-mode - When Emacs starts up, it contains a buffer named @samp{*scratch*}, + When Emacs starts up, it contains a buffer named @file{*scratch*}, which is provided for evaluating Emacs Lisp expressions interactively. Its major mode is Lisp Interaction mode. You can also enable Lisp Interaction mode by typing @kbd{M-x lisp-interaction-mode}. @findex eval-print-last-sexp @kindex C-j @r{(Lisp Interaction mode)} - In the @samp{*scratch*} buffer, and other Lisp Interaction mode + In the @file{*scratch*} buffer, and other Lisp Interaction mode buffers, @kbd{C-j} (@code{eval-print-last-sexp}) evaluates the Lisp expression before point, and inserts the value at point. Thus, as you type expressions into the buffer followed by @kbd{C-j} after each @@ -1522,7 +1522,7 @@ expressions and their values. All other commands in Lisp Interaction mode are the same as in Emacs Lisp mode. @vindex initial-scratch-message - At startup, the @samp{*scratch*} buffer contains a short message, in + At startup, the @file{*scratch*} buffer contains a short message, in the form of a Lisp comment, that explains what it is for. This message is controlled by the variable @code{initial-scratch-message}, which should be either a string, or @code{nil} (which means to @@ -1533,7 +1533,7 @@ suppress the message). interactively is to use Inferior Emacs Lisp mode, which provides an interface rather like Shell mode (@pxref{Shell Mode}) for evaluating Emacs Lisp expressions. Type @kbd{M-x ielm} to create an -@samp{*ielm*} buffer which uses this mode. For more information, see +@file{*ielm*} buffer which uses this mode. For more information, see that command's documentation. @node External Lisp @@ -1555,13 +1555,13 @@ whose names end in @file{.l}, @file{.lsp}, or @file{.lisp}. evaluated. To begin an external Lisp session, type @kbd{M-x run-lisp}. This runs the program named @command{lisp}, and sets it up so that both input and output go through an Emacs buffer named -@samp{*inferior-lisp*}. To change the name of the Lisp program run by +@file{*inferior-lisp*}. To change the name of the Lisp program run by @kbd{M-x run-lisp}, change the variable @code{inferior-lisp-program}. - The major mode for the @samp{*lisp*} buffer is Inferior Lisp mode, + The major mode for the @file{*lisp*} buffer is Inferior Lisp mode, which combines the characteristics of Lisp mode and Shell mode (@pxref{Shell Mode}). To send input to the Lisp session, go to the -end of the @samp{*lisp*} buffer and type the input, followed by +end of the @file{*lisp*} buffer and type the input, followed by @key{RET}. Terminal output from the Lisp session is automatically inserted in the buffer. @@ -1572,7 +1572,7 @@ inserted in the buffer. buffer to a Lisp session that you had started with @kbd{M-x run-lisp}. The expression sent is the top-level Lisp expression at or following point. The resulting value goes as usual into the -@samp{*inferior-lisp*} buffer. Note that the effect of @kbd{C-M-x} in +@file{*inferior-lisp*} buffer. Note that the effect of @kbd{C-M-x} in Lisp mode is thus very similar to its effect in Emacs Lisp mode (@pxref{Lisp Eval}), except that the expression is sent to a different Lisp environment instead of being evaluated in Emacs. @@ -1587,4 +1587,4 @@ to a Scheme subprocess, are very similar. Scheme source files are edited in Scheme mode, which can be explicitly enabled with @kbd{M-x scheme-mode}. You can initiate a Scheme session by typing @kbd{M-x run-scheme} (the buffer for interacting with Scheme is named -@samp{*scheme*}), and send expressions to it by typing @kbd{C-M-x}. +@file{*scheme*}), and send expressions to it by typing @kbd{C-M-x}. diff --git a/doc/emacs/cmdargs.texi b/doc/emacs/cmdargs.texi index 00730cc6510..56af8d426f6 100644 --- a/doc/emacs/cmdargs.texi +++ b/doc/emacs/cmdargs.texi @@ -157,7 +157,7 @@ Evaluate Lisp expression @var{expression}. @item --insert=@var{file} @opindex --insert @cindex insert file contents, command-line argument -Insert the contents of @var{file} into the @samp{*scratch*} buffer +Insert the contents of @var{file} into the @file{*scratch*} buffer (@pxref{Lisp Interaction}). This is like what @kbd{M-x insert-file} does (@pxref{Misc File Ops}). diff --git a/doc/emacs/custom.texi b/doc/emacs/custom.texi index a00423a5826..a17eb54e337 100644 --- a/doc/emacs/custom.texi +++ b/doc/emacs/custom.texi @@ -561,7 +561,7 @@ format of a theme file and how to make one. @vindex custom-theme-directory @cindex color scheme Type @kbd{M-x customize-themes} to switch to a buffer named -@samp{*Custom Themes*}, which lists the Custom themes that Emacs knows +@file{*Custom Themes*}, which lists the Custom themes that Emacs knows about. By default, Emacs looks for theme files in two locations: the directory specified by the variable @code{custom-theme-directory} (which defaults to @file{~/.emacs.d/}), and a directory named @@ -580,11 +580,11 @@ add the directory name to the list variable @code{custom-theme-directory} has the special meaning of the value of the variable @code{custom-theme-directory}, while @code{t} stands for the built-in theme directory @file{etc/themes}. The themes listed in -the @samp{*Custom Themes*} buffer are those found in the directories +the @file{*Custom Themes*} buffer are those found in the directories specified by @code{custom-theme-load-path}. @kindex C-x C-s @r{(Custom Themes buffer)} - In the @samp{*Custom Themes*} buffer, you can activate the checkbox + In the @file{*Custom Themes*} buffer, you can activate the checkbox next to a Custom theme to enable or disable the theme for the current Emacs session. When a Custom theme is enabled, all of its settings (variables and faces) take effect in the Emacs session. To apply the @@ -608,7 +608,7 @@ always considered safe. Setting or saving Custom themes actually works by customizing the variable @code{custom-enabled-themes}. The value of this variable is a list of Custom theme names (as Lisp symbols, e.g.@: @code{tango}). -Instead of using the @samp{*Custom Themes*} buffer to set +Instead of using the @file{*Custom Themes*} buffer to set @code{custom-enabled-themes}, you can customize the variable using the usual customization interface, e.g.@: with @kbd{M-x customize-option}. Note that Custom themes are not allowed to set @@ -635,7 +635,7 @@ type @kbd{M-x disable-theme}. @findex describe-theme To see a description of a Custom theme, type @kbd{?} on its line in -the @samp{*Custom Themes*} buffer; or type @kbd{M-x describe-theme} +the @file{*Custom Themes*} buffer; or type @kbd{M-x describe-theme} anywhere in Emacs and enter the theme name in the minibuffer. @node Creating Custom Themes @@ -645,12 +645,12 @@ anywhere in Emacs and enter the theme name in the minibuffer. @findex customize-create-theme You can define a Custom theme using an interface similar to the customization buffer, by typing @kbd{M-x customize-create-theme}. -This switches to a buffer named @samp{*Custom Theme*}. It also offers +This switches to a buffer named @file{*Custom Theme*}. It also offers to insert some common Emacs faces into the theme (a convenience, since Custom themes are often used to customize faces). If you answer no, the theme will initially contain no settings. - Near the top of the @samp{*Custom Theme*} buffer are editable fields + Near the top of the @file{*Custom Theme*} buffer are editable fields where you can enter the theme's name and description. The name can be anything except @samp{user}. The description is the one that will be shown when you invoke @kbd{M-x describe-theme} for the theme. Its @@ -673,7 +673,7 @@ theme, uncheck the checkbox next to its name. @file{@var{name}-theme.el} where @var{name} is the theme name, in the directory named by @code{custom-theme-directory}. - From the @samp{*Custom Theme*} buffer, you can view and edit an + From the @file{*Custom Theme*} buffer, you can view and edit an existing Custom theme by activating the @samp{[Visit Theme]} button and specifying the theme name. You can also add the settings of another theme into the buffer, using the @samp{[Merge Theme]} button. @@ -683,7 +683,7 @@ the @samp{[Merge Theme]} button and specifying the special theme named A theme file is simply an Emacs Lisp source file, and loading the Custom theme works by loading the Lisp file. Therefore, you can edit -a theme file directly instead of using the @samp{*Custom Theme*} +a theme file directly instead of using the @file{*Custom Theme*} buffer. @c Add link to the relevant Emacs Lisp Reference manual node, once @c that is written. @@ -809,7 +809,7 @@ can set any variable with a Lisp expression like this: @noindent To execute such an expression, type @kbd{M-:} (@code{eval-expression}) and enter the expression in the minibuffer (@pxref{Lisp Eval}). -Alternatively, go to the @samp{*scratch*} buffer, type in the +Alternatively, go to the @file{*scratch*} buffer, type in the expression, and then type @kbd{C-j} (@pxref{Lisp Interaction}). Setting variables, like all means of customizing Emacs except where diff --git a/doc/emacs/entering.texi b/doc/emacs/entering.texi index d9f388a4783..3ec7f739e6c 100644 --- a/doc/emacs/entering.texi +++ b/doc/emacs/entering.texi @@ -63,7 +63,7 @@ certain Lisp files, where to put the initial frame, and so forth. If the variable @code{inhibit-startup-screen} is non-@code{nil}, Emacs does not display the startup screen. In that case, if one or more files were specified on the command line, Emacs simply displays -those files; otherwise, it displays a buffer named @samp{*scratch*}, +those files; otherwise, it displays a buffer named @file{*scratch*}, which can be used to evaluate Emacs Lisp expressions interactively. @xref{Lisp Interaction}. You can set the variable @code{inhibit-startup-screen} using the Customize facility @@ -82,7 +82,7 @@ the desired file or directory. @ignore @c I do not think this should be mentioned. AFAICS it is just a dodge @c around inhibit-startup-screen not being settable on a site-wide basis. -or @code{t}, which means to display the @samp{*scratch*} buffer. +or @code{t}, which means to display the @file{*scratch*} buffer. @end ignore @node Exiting, Basic, Entering Emacs, Top diff --git a/doc/emacs/files.texi b/doc/emacs/files.texi index b0d4e130c67..d85e7756816 100644 --- a/doc/emacs/files.texi +++ b/doc/emacs/files.texi @@ -976,7 +976,7 @@ are not visiting files are auto-saved only if you request it explicitly; when they are auto-saved, the auto-save file name is made by appending @samp{#} to the front and rear of buffer name, then adding digits and letters at the end for uniqueness. For -example, the @samp{*mail*} buffer in which you compose messages to be +example, the @file{*mail*} buffer in which you compose messages to be sent might be auto-saved in a file named @file{#*mail*#704juu}. Auto-save file names are made this way unless you reprogram parts of Emacs to do something different (the functions @code{make-auto-save-file-name} and @@ -1245,7 +1245,7 @@ for more information about using the Trash. @vindex diff-switches The command @kbd{M-x diff} prompts for two file names, using the minibuffer, and displays the differences between the two files in a -buffer named @samp{*diff*}. This works by running the @command{diff} +buffer named @file{*diff*}. This works by running the @command{diff} program, using options taken from the variable @code{diff-switches}. The value of @code{diff-switches} should be a string; the default is @code{"-c"} to specify a context diff. @xref{Top,, Diff, diff, diff --git a/doc/emacs/frames.texi b/doc/emacs/frames.texi index 4cfaffdadb8..8d6a39665da 100644 --- a/doc/emacs/frames.texi +++ b/doc/emacs/frames.texi @@ -257,7 +257,7 @@ highlighting. @key{RET}, or by clicking either @kbd{Mouse-1} or @kbd{Mouse-2} on the button. For example, in a Dired buffer, each file name is a button; activating it causes Emacs to visit that file (@pxref{Dired}). In a -@samp{*Compilation*} buffer, each error message is a button, and +@file{*Compilation*} buffer, each error message is a button, and activating it visits the source code for that error (@pxref{Compilation}). diff --git a/doc/emacs/glossary.texi b/doc/emacs/glossary.texi index f4ea4f30cd5..765a4b59053 100644 --- a/doc/emacs/glossary.texi +++ b/doc/emacs/glossary.texi @@ -421,7 +421,7 @@ tell it to. @xref{Bugs}. The echo area is the bottom line of the screen, used for echoing the arguments to commands, for asking questions, and showing brief messages (including error messages). The messages are stored in the buffer -@samp{*Messages*} so you can review them later. @xref{Echo Area}. +@file{*Messages*} so you can review them later. @xref{Echo Area}. @item Echoing Echoing is acknowledging the receipt of input events by displaying diff --git a/doc/emacs/help.texi b/doc/emacs/help.texi index 84da0a9a681..eef38136583 100644 --- a/doc/emacs/help.texi +++ b/doc/emacs/help.texi @@ -102,7 +102,7 @@ to (@code{describe-key-briefly}). Here @kbd{c} stands for Display the commands and variables whose documentation matches @var{topics} (@code{apropos-documentation}). @item C-h e -Display the @code{*Messages*} buffer +Display the @file{*Messages*} buffer (@code{view-echo-area-messages}). @item C-h f @var{function} @key{RET} Display documentation on the Lisp function named @var{function} @@ -168,7 +168,7 @@ programming language you are editing (@code{info-lookup-symbol}). @item C-h . Display the help message for a special text area, if point is in one (@code{display-local-help}). (These include, for example, links in -@samp{*Help*} buffers.) +@file{*Help*} buffers.) @end table @node Key Help @@ -519,7 +519,7 @@ use @kbd{C-h c} to find out what they do. @findex view-echo-area-messages To review recent echo area messages, use @kbd{C-h e} (@code{view-echo-area-messages}). This displays the buffer -@code{*Messages*}, where those messages are kept. +@file{*Messages*}, where those messages are kept. @kindex C-h m @findex describe-mode diff --git a/doc/emacs/macos.texi b/doc/emacs/macos.texi index 10293fe7747..695f8f9c6c3 100644 --- a/doc/emacs/macos.texi +++ b/doc/emacs/macos.texi @@ -142,7 +142,7 @@ Emacs open a file. A typical reason for this would be a user double-clicking a file in the Finder application. By default, Emacs responds to this event by opening a new frame and visiting the file in that frame (@code{ns-find-file}). As an exception, if the selected -buffer is the @samp{*scratch*} buffer, Emacs visits the file in the +buffer is the @file{*scratch*} buffer, Emacs visits the file in the selected frame. You can change how Emacs responds to a @code{ns-open-file} event by diff --git a/doc/emacs/maintaining.texi b/doc/emacs/maintaining.texi index e812c9112df..9d56b3bdc6e 100644 --- a/doc/emacs/maintaining.texi +++ b/doc/emacs/maintaining.texi @@ -477,7 +477,7 @@ If every work file in the VC fileset is unchanged, do nothing. @item If every work file in the VC fileset has been modified, commit the -changes. To do this, Emacs pops up a @samp{*vc-log*} buffer; type the +changes. To do this, Emacs pops up a @file{*vc-log*} buffer; type the desired log entry for the new revision, followed by @kbd{C-c C-c} to commit. @xref{Log Buffer}. @@ -530,7 +530,7 @@ so that you can begin to edit it. @item If each file is locked by you and contains changes, commit the -changes. To do this, Emacs pops up a @samp{*vc-log*} buffer; type the +changes. To do this, Emacs pops up a @file{*vc-log*} buffer; type the desired log entry for the new revision, followed by @kbd{C-c C-c} to commit (@pxref{Log Buffer}). @@ -588,7 +588,7 @@ they use the concept of ``checking out'' individual files. @cindex C-c C-c @r{(Log Edit mode)} @findex log-edit-done When you tell VC to commit a change, it pops up a buffer named -@samp{*vc-log*}. In this buffer, you should write a @dfn{log entry} +@file{*vc-log*}. In this buffer, you should write a @dfn{log entry} describing the changes you have made (@pxref{Why Version Control?}). After you are done, type @kbd{C-c C-c} (@code{log-edit-done}) to exit the buffer and commit the change, together with your log entry. @@ -596,12 +596,12 @@ the buffer and commit the change, together with your log entry. @cindex Log Edit mode @cindex mode, Log Edit @vindex vc-log-mode-hook - The major mode for the @samp{*vc-log*} buffer is Log Edit mode, a + The major mode for the @file{*vc-log*} buffer is Log Edit mode, a variant of Text mode (@pxref{Text Mode}). On entering Log Edit mode, Emacs runs the hooks @code{text-mode-hook} and @code{vc-log-mode-hook} (@pxref{Hooks}). - In the @samp{*vc-log*} buffer, you can write one or more @dfn{header + In the @file{*vc-log*} buffer, you can write one or more @dfn{header lines}, specifying additional information to be supplied to the version control system. Each header line must occupy a single line at the top of the buffer; the first line that is not a header line is @@ -626,7 +626,7 @@ support it, the header is treated as part of the log entry. @findex log-edit-show-files @kindex C-c C-d @r{(Log Edit mode)} @findex log-edit-show-diff - While in the @samp{*vc-log*} buffer, the ``current VC fileset'' is + While in the @file{*vc-log*} buffer, the ``current VC fileset'' is considered to be the fileset that will be committed if you type @w{@kbd{C-c C-c}}. To view a list of the files in the VC fileset, type @w{@kbd{C-c C-f}} (@code{log-edit-show-files}). To view a diff @@ -639,7 +639,7 @@ started editing (@pxref{Old Revisions}), type @kbd{C-c C-d} If the VC fileset includes one or more @file{ChangeLog} files (@pxref{Change Log}), type @kbd{C-c C-a} (@code{log-edit-insert-changelog}) to pull the relevant entries into -the @samp{*vc-log*} buffer. If the topmost item in each +the @file{*vc-log*} buffer. If the topmost item in each @file{ChangeLog} was made under your user name on the current date, this command searches that item for entries matching the file(s) to be committed, and inserts them. @@ -652,7 +652,7 @@ Edit buffer. To abort a commit, just @strong{don't} type @kbd{C-c C-c} in that buffer. You can switch buffers and do other editing. As long as you don't try to make another commit, the entry you were editing remains -in the @samp{*vc-log*} buffer, and you can go back to that buffer at +in the @file{*vc-log*} buffer, and you can go back to that buffer at any time to complete the commit. @kindex M-n @r{(Log Edit mode)} @@ -904,10 +904,10 @@ Display the changes that will be sent by the next push operation @kindex C-x v l @findex vc-print-log The command @kbd{C-x v l} (@code{vc-print-log}) displays a buffer -named @samp{*vc-change-log*}, showing the history of changes made to +named @file{*vc-change-log*}, showing the history of changes made to the current file, including who made the changes, the dates, and the log entry for each change (these are the same log entries you would -enter via the @samp{*vc-log*} buffer; @pxref{Log Buffer}). Point is +enter via the @file{*vc-log*} buffer; @pxref{Log Buffer}). Point is centered at the revision of the file currently being visited. With a prefix argument, the command prompts for the revision to center on, and the maximum number of revisions to display. @@ -919,7 +919,7 @@ file listed on the current line. @findex vc-print-root-log @findex log-view-toggle-entry-display @kbd{C-x v L} (@code{vc-print-root-log}) displays a -@samp{*vc-change-log*} buffer showing the history of the entire +@file{*vc-change-log*} buffer showing the history of the entire version-controlled directory tree (RCS, SCCS, and CVS do not support this feature). With a prefix argument, the command prompts for the maximum number of revisions to display. @@ -927,7 +927,7 @@ maximum number of revisions to display. The @kbd{C-x v L} history is shown in a compact form, usually showing only the first line of each log entry. However, you can type @key{RET} (@code{log-view-toggle-entry-display}) in the -@samp{*vc-change-log*} buffer to reveal the entire log entry for the +@file{*vc-change-log*} buffer to reveal the entire log entry for the revision at point. A second @key{RET} hides it again. On a decentralized version control system, the @kbd{C-x v I} @@ -942,7 +942,7 @@ specific repository. Similarly, @kbd{C-x v O} another repository, the next time you run the ``push'' command; with a prefix argument, it prompts for a specific destination repository. - In the @samp{*vc-change-log*} buffer, you can use the following keys + In the @file{*vc-change-log*} buffer, you can use the following keys to move between the logs of revisions and of files, and to examine and compare past revisions (@pxref{Old Revisions}): @@ -993,11 +993,11 @@ revision at point. @vindex vc-log-show-limit Because fetching many log entries can be slow, the -@samp{*vc-change-log*} buffer displays no more than 2000 revisions by +@file{*vc-change-log*} buffer displays no more than 2000 revisions by default. The variable @code{vc-log-show-limit} specifies this limit; if you set the value to zero, that removes the limit. You can also increase the number of revisions shown in an existing -@samp{*vc-change-log*} buffer by clicking on the @samp{Show 2X +@file{*vc-change-log*} buffer by clicking on the @samp{Show 2X entries} or @samp{Show unlimited entries} buttons at the end of the buffer. However, RCS, SCCS, and CVS do not support this feature. @@ -1045,7 +1045,7 @@ it is used to specify multi-file VC filesets for commands like To use the VC Directory buffer, type @kbd{C-x v d} (@code{vc-dir}). This reads a directory name using the minibuffer, and switches to a VC Directory buffer for that directory. By default, the buffer is named -@samp{*vc-dir*}. Its contents are described +@file{*vc-dir*}. Its contents are described @iftex below. @end iftex diff --git a/doc/emacs/mini.texi b/doc/emacs/mini.texi index e20d5a347cd..e498516ae7f 100644 --- a/doc/emacs/mini.texi +++ b/doc/emacs/mini.texi @@ -197,7 +197,7 @@ set the variable @code{enable-recursive-minibuffers} to @code{t}. @findex minibuffer-inactive-mode When not active, the minibuffer is in @code{minibuffer-inactive-mode}, -and clicking @kbd{Mouse-1} there shows the @samp{*Messages*} buffer. +and clicking @kbd{Mouse-1} there shows the @file{*Messages*} buffer. If you use a dedicated frame for minibuffers, Emacs also recognizes certain keys there, for example @kbd{n} to make a new frame. diff --git a/doc/emacs/misc.texi b/doc/emacs/misc.texi index ca9c2760ce2..b291aff0ba4 100644 --- a/doc/emacs/misc.texi +++ b/doc/emacs/misc.texi @@ -507,7 +507,7 @@ minibuffer and executes it as a shell command, in a subshell made just for that command. Standard input for the command comes from the null device. If the shell command produces any output, the output appears either in the echo area (if it is short), or in an Emacs buffer named -@samp{*Shell Command Output*}, displayed in another window (if the +@file{*Shell Command Output*}, displayed in another window (if the output is long). For instance, one way to decompress a file named @file{foo.gz} is to @@ -554,7 +554,7 @@ old region and replaces it with the output from the shell command. see what keys are in the buffer. If the buffer contains a GnuPG key, type @kbd{C-x h M-| gpg @key{RET}} to feed the entire buffer contents to @command{gpg}. This will output the list of keys to the -@samp{*Shell Command Output*} buffer. +@file{*Shell Command Output*} buffer. @vindex shell-file-name The above commands use the shell specified by the variable @@ -577,7 +577,7 @@ inserted into a buffer of that name. @findex shell To run a subshell interactively, type @kbd{M-x shell}. This creates -(or reuses) a buffer named @samp{*shell*}, and runs a shell subprocess +(or reuses) a buffer named @file{*shell*}, and runs a shell subprocess with input coming from and output going to that buffer. That is to say, any terminal output from the subshell goes into the buffer, advancing point, and any terminal input for the subshell comes from @@ -600,8 +600,8 @@ easier to distinguish input lines from the shell output. To make multiple subshells, invoke @kbd{M-x shell} with a prefix argument (e.g. @kbd{C-u M-x shell}). Then the command will read a buffer name, and create (or reuse) a subshell in that buffer. You can -also rename the @samp{*shell*} buffer using @kbd{M-x rename-uniquely}, -then create a new @samp{*shell*} buffer using plain @kbd{M-x shell}. +also rename the @file{*shell*} buffer using @kbd{M-x rename-uniquely}, +then create a new @file{*shell*} buffer using plain @kbd{M-x shell}. Subshells in different buffers run independently and in parallel. @vindex explicit-shell-file-name @@ -1183,7 +1183,7 @@ underlying shell, of course. @findex term To run a subshell in a terminal emulator, use @kbd{M-x term}. This -creates (or reuses) a buffer named @samp{*terminal*}, and runs a +creates (or reuses) a buffer named @file{*terminal*}, and runs a subshell with input coming from your keyboard, and output going to that buffer. @@ -1212,7 +1212,7 @@ serial port. @xref{Serial Terminal}. The file name used to load the subshell is determined the same way as for Shell mode. To make multiple terminal emulators, rename the -buffer @samp{*terminal*} to something different using @kbd{M-x +buffer @file{*terminal*} to something different using @kbd{M-x rename-uniquely}, just as with Shell mode. Unlike Shell mode, Term mode does not track the current directory by @@ -1511,7 +1511,7 @@ systems, such as MS-Windows (@pxref{Windows Startup, emacsclient}), where it cannot create graphical frames when started from a text-only terminal, it creates a new text-only terminal frame (@pxref{Frames}). If you omit a filename argument while supplying the @samp{-c} option, -the new frame displays the @samp{*scratch*} buffer (@pxref{Buffers}). +the new frame displays the @file{*scratch*} buffer (@pxref{Buffers}). @item -F @var{alist} @itemx --frame-parameters=@var{alist} @@ -1600,7 +1600,7 @@ graphical display. On systems, such as MS-Windows, where this is impossible, Emacs will create a new frame, either GUI or text-only, on the same terminal where it was started (@pxref{Windows Startup, emacsclient}). If you omit a filename argument while supplying this -option, the new frame displays the @samp{*scratch*} buffer. +option, the new frame displays the @file{*scratch*} buffer. @xref{Buffers}. @end table @@ -1868,7 +1868,7 @@ init file (@pxref{Init File}), followed by @code{(pr-update-menus)}. This function replaces the usual printing commands in the menu bar with a @samp{Printing} submenu that contains various printing options. You can also type @kbd{M-x pr-interface RET}; this creates a -@samp{*Printing Interface*} buffer, similar to a customization buffer, +@file{*Printing Interface*} buffer, similar to a customization buffer, where you can set the printing options. After selecting what and how to print, you start the print job using the @samp{Print} button (click @kbd{mouse-2} on it, or move point over it and type @kbd{RET}). For @@ -2482,7 +2482,7 @@ encrypted in a simple monoalphabetic substitution cipher. @findex dissociated-press @kbd{M-x dissociated-press} scrambles the text in the current Emacs buffer, word by word or character by character, writing its output to -a buffer named @samp{*Dissociation*}. A positive argument tells it to +a buffer named @file{*Dissociation*}. A positive argument tells it to operate character by character, and specifies the number of overlap characters. A negative argument tells it to operate word by word, and specifies the number of overlap words. Dissociated Press produces diff --git a/doc/emacs/package.texi b/doc/emacs/package.texi index 91b25cfa00e..4435590536f 100644 --- a/doc/emacs/package.texi +++ b/doc/emacs/package.texi @@ -14,7 +14,7 @@ Emacs includes a facility that lets you easily download and install separate Emacs Lisp program, sometimes including other components such as an Info manual. - @kbd{M-x list-packages} brings up a buffer named @samp{*Packages*} + @kbd{M-x list-packages} brings up a buffer named @file{*Packages*} with a list of all packages. You can install or uninstall packages via this buffer. @xref{Package Menu}. diff --git a/doc/emacs/programs.texi b/doc/emacs/programs.texi index 8217400663f..5f7abcf3881 100644 --- a/doc/emacs/programs.texi +++ b/doc/emacs/programs.texi @@ -1130,7 +1130,7 @@ prompts for a topic, with completion (@pxref{Completion}), and runs the @command{man} program to format the corresponding man page. If the system permits, it runs @command{man} asynchronously, so that you can keep on editing while the page is being formatted. The result -goes in a buffer named @samp{*Man @var{topic}*}. These buffers use a +goes in a buffer named @file{*Man @var{topic}*}. These buffers use a special major mode, Man mode, that facilitates scrolling and jumping to other manual pages. For details, type @kbd{C-h m} while in a Man mode buffer. @@ -1165,7 +1165,7 @@ command. Unlike @kbd{M-x man}, it does not run any external programs to format and display the man pages; the formatting is done by Emacs, so it works on systems such as MS-Windows where the @command{man} program may be unavailable. It prompts for a man page, and displays -it in a buffer named @samp{*WoMan @var{section} @var{topic}}. +it in a buffer named @file{*WoMan @var{section} @var{topic}}. @kbd{M-x woman} computes the completion list for manpages the first time you invoke the command. With a numeric argument, it recomputes @@ -1705,7 +1705,7 @@ inserted on that line, and any @samp{\} there is deleted. @cindex preprocessor highlighting @findex cpp-highlight-buffer Highlight parts of the text according to its preprocessor conditionals. -This command displays another buffer named @samp{*CPP Edit*}, which +This command displays another buffer named @file{*CPP Edit*}, which serves as a graphic menu for selecting how to display particular kinds of conditionals and their contents. After changing various settings, click on @samp{[A]pply these settings} (or go to that buffer and type diff --git a/doc/emacs/screen.texi b/doc/emacs/screen.texi index fe3222e198f..fdc69a78cfc 100644 --- a/doc/emacs/screen.texi +++ b/doc/emacs/screen.texi @@ -131,15 +131,15 @@ Commands that take a long time often display messages ending in progress has been made, as a percentage), and add @samp{done} when they are finished. -@cindex @samp{*Messages*} buffer +@cindex @file{*Messages*} buffer @cindex saved echo area messages @cindex messages saved from echo area @vindex message-log-max Informative echo area messages are saved in a special buffer named -@samp{*Messages*}. (We have not explained buffers yet; see +@file{*Messages*}. (We have not explained buffers yet; see @ref{Buffers}, for more information about them.) If you miss a message that appeared briefly on the screen, you can switch to the -@samp{*Messages*} buffer to see it again. The @samp{*Messages*} +@file{*Messages*} buffer to see it again. The @file{*Messages*} buffer is limited to a certain number of lines, specified by the variable @code{message-log-max}. (We have not explained variables either; see @ref{Variables}, for more information about them.) Beyond diff --git a/doc/emacs/search.texi b/doc/emacs/search.texi index 877e291ff36..38f00f03532 100644 --- a/doc/emacs/search.texi +++ b/doc/emacs/search.texi @@ -1308,7 +1308,7 @@ displayed before and after each matching line. @kindex RET @r{(Occur mode)} @kindex o @r{(Occur mode)} @kindex C-o @r{(Occur mode)} -In the @samp{*Occur*} buffer, you can click on each entry, or move +In the @file{*Occur*} buffer, you can click on each entry, or move point there and type @key{RET}, to visit the corresponding position in the buffer that was searched. @kbd{o} and @kbd{C-o} display the match in another window; @kbd{C-o} does not select it. Alternatively, you @@ -1317,7 +1317,7 @@ occurrences one by one (@pxref{Compilation Mode}). @cindex Occur Edit mode @cindex mode, Occur Edit -Typing @kbd{e} in the @samp{*Occur*} buffer switches to Occur Edit +Typing @kbd{e} in the @file{*Occur*} buffer switches to Occur Edit mode, in which edits made to the entries are also applied to the text in the originating buffer. Type @kbd{C-c C-c} to return to Occur mode. diff --git a/doc/emacs/sending.texi b/doc/emacs/sending.texi index 5e80eb10824..bf2b41cdbe0 100644 --- a/doc/emacs/sending.texi +++ b/doc/emacs/sending.texi @@ -12,7 +12,7 @@ @kindex C-x m @findex compose-mail To send an email message from Emacs, type @kbd{C-x m}. This -switches to a buffer named @samp{*unsent mail*}, where you can edit +switches to a buffer named @file{*unsent mail*}, where you can edit the text and headers of the message. When done, type @kbd{C-c C-s} or @kbd{C-c C-c} to send it. @@ -306,7 +306,7 @@ completion, and inserts its definition at point. @cindex Message mode @cindex mode, Message - The default major mode for the @samp{*mail*} buffer is called + The default major mode for the @file{*mail*} buffer is called Message mode. It behaves like Text mode in many ways, but provides several additional commands on the @kbd{C-c} prefix, which make editing a message more convenient. diff --git a/doc/emacs/text.texi b/doc/emacs/text.texi index 5363da7d649..e56b00e2723 100644 --- a/doc/emacs/text.texi +++ b/doc/emacs/text.texi @@ -1548,7 +1548,7 @@ text that belongs inside. Afterward, use the command @kbd{C-c @}} point, and inserts two newlines to start a new paragraph. It outputs a message in the echo area if any mismatch is found. @kbd{M-x tex-validate-region} checks a region, paragraph by paragraph. The -errors are listed in an @samp{*Occur*} buffer; you can use the usual +errors are listed in an @file{*Occur*} buffer; you can use the usual Occur mode commands in that buffer, such as @kbd{C-c C-c}, to visit a particular mismatch (@pxref{Other Repeating Search}). @@ -1694,7 +1694,7 @@ name with @samp{*} in the command string. For example, @findex tex-recenter-output-buffer @kindex C-c C-l @r{(@TeX{} mode)} The terminal output from @TeX{}, including any error messages, -appears in a buffer called @samp{*tex-shell*}. If @TeX{} gets an +appears in a buffer called @file{*tex-shell*}. If @TeX{} gets an error, you can switch to this buffer and feed it input (this works as in Shell mode; @pxref{Interactive Shell}). Without switching to this buffer you can scroll it so that its last line is visible by typing diff --git a/doc/emacs/trouble.texi b/doc/emacs/trouble.texi index 1b3f1419af4..c4f291bde82 100644 --- a/doc/emacs/trouble.texi +++ b/doc/emacs/trouble.texi @@ -636,7 +636,7 @@ Emacs, so you will have to report the bug somewhere else. The type of machine you are using, and the operating system name and version number (again, automatically included by @kbd{M-x report-emacs-bug}). @kbd{M-x emacs-version @key{RET}} provides this -information too. Copy its output from the @samp{*Messages*} buffer, +information too. Copy its output from the @file{*Messages*} buffer, so that you get it all and get it accurately. @item @@ -699,7 +699,7 @@ The way to collect the terminal output is to execute the Lisp expression @end example @noindent -using @kbd{M-:} or from the @samp{*scratch*} buffer just after +using @kbd{M-:} or from the @file{*scratch*} buffer just after starting Emacs. From then on, Emacs copies all terminal output to the specified termscript file as well, until the Emacs process is killed. If the problem happens when Emacs starts up, put this expression into @@ -725,10 +725,10 @@ Alternatively, use the @command{locale} command, if your system has it, to display your locale settings. You can use the @kbd{M-!} command to execute these commands from -Emacs, and then copy the output from the @samp{*Messages*} buffer into +Emacs, and then copy the output from the @file{*Messages*} buffer into the bug report. Alternatively, @kbd{M-x getenv @key{RET} LC_ALL @key{RET}} will display the value of @code{LC_ALL} in the echo area, and -you can copy its output from the @samp{*Messages*} buffer. +you can copy its output from the @file{*Messages*} buffer. @item A description of what behavior you observe that you believe is @@ -761,7 +761,7 @@ important to report the precise text of the error message, and a backtrace showing how the Lisp program in Emacs arrived at the error. To get the error message text accurately, copy it from the -@samp{*Messages*} buffer into the bug report. Copy all of it, not just +@file{*Messages*} buffer into the bug report. Copy all of it, not just part. @findex toggle-debug-on-error