(autoload 'ediff-current-file "ediff" "\
Start ediff between current buffer and its file on disk.
This command can be used instead of `revert-buffer'. If there is
-nothing to revert then this command fails." t)
+nothing to revert then this command fails.
+
+Non-interactively, STARTUP-HOOKS is a list of functions that Emacs calls
+without arguments after setting up the Ediff buffers.
+
+(fn &optional STARTUP-HOOKS)" t)
(autoload 'ediff-backup "ediff" "\
Run Ediff on FILE and its backup file.
Uses the latest backup, if there are several numerical backups.
there is no help property at point.
(fn &optional INHIBIT-WARNING)" t)
-(autoload 'help-at-pt-cancel-timer "help-at-pt" "\
-Cancel any timer set by `help-at-pt-set-timer'.
-This disables `help-at-pt-display-when-idle'." t)
-(autoload 'help-at-pt-set-timer "help-at-pt" "\
-Enable `help-at-pt-display-when-idle'.
-This is done by setting a timer, if none is currently active." t)
-(defvar help-at-pt-display-when-idle 'never "\
-Automatically show local help on point-over.
-If the value is t, the string obtained from any `kbd-help' or
-`help-echo' property at point is automatically printed in the
-echo area, if nothing else is already displayed there, or after a
-quit. If both `kbd-help' and `help-echo' produce help strings,
-`kbd-help' is used. If the value is a list, the help only gets
-printed if there is a text or overlay property at point that is
-included in this list. Suggested properties are `keymap',
-`local-map', `button' and `kbd-help'. Any value other than t or
-a non-empty list disables the feature.
-
-The text printed from the `help-echo' property is often only
-relevant when using the mouse. The presence of a `kbd-help'
-property guarantees that non mouse specific help is available.
-
-This variable only takes effect after a call to
-`help-at-pt-set-timer'. The help gets printed after Emacs has
-been idle for `help-at-pt-timer-delay' seconds. You can call
-`help-at-pt-cancel-timer' to cancel the timer set by, and the
-effect of, `help-at-pt-set-timer'.
-
-When this variable is set through Custom, `help-at-pt-set-timer'
-is called automatically, unless the value is `never', in which
-case `help-at-pt-cancel-timer' is called. Specifying an empty
-list of properties through Custom will set the timer, thus
-enabling buffer local values. It sets the actual value to nil.
-Thus, Custom distinguishes between a nil value and other values
-that disable the feature, which Custom identifies with `never'.
-The default is `never'.
-
-Eldoc uses the echo area to display documentation. As such it
-conflicts with `help-at-pt-display-when-idle' due to the use of
-the echo area. If you use Eldoc, consider setting
-`eldoc-help-at-pt' instead.")
-(custom-autoload 'help-at-pt-display-when-idle "help-at-pt" nil)
-(autoload 'scan-buf-move-to-region "help-at-pt" "\
-Go to the start of the next region with non-nil PROP property.
-Then run HOOK, which should be a quoted symbol that is a normal
-hook variable, or an expression evaluating to such a symbol.
-Adjacent areas with different non-nil PROP properties are
-considered different regions.
-
-With numeric argument ARG, move to the start of the ARGth next
-such region, then run HOOK. If ARG is negative, move backward.
-If point is already in a region, then that region does not count
-toward ARG. If ARG is 0 and point is inside a region, move to
-the start of that region. If ARG is 0 and point is not in a
-region, print a message to that effect, but do not move point and
-do not run HOOK. If there are not enough regions to move over,
-an error results and the number of available regions is mentioned
-in the error message. Point is not moved and HOOK is not run.
-
-(fn PROP &optional ARG HOOK)")
-(autoload 'scan-buf-next-region "help-at-pt" "\
-Go to the start of the next region with non-nil help-echo.
-Print the help found there using `display-local-help'. Adjacent
-areas with different non-nil help-echo properties are considered
-different regions.
-
-With numeric argument ARG, move to the start of the ARGth next
-help-echo region. If ARG is negative, move backward. If point
-is already in a help-echo region, then that region does not count
-toward ARG. If ARG is 0 and point is inside a help-echo region,
-move to the start of that region. If ARG is 0 and point is not
-in such a region, just print a message to that effect. If there
-are not enough regions to move over, an error results and the
-number of available regions is mentioned in the error message.
-
-A potentially confusing subtlety is that point can be in a
-help-echo region without any local help being available. This is
-because `help-echo' can be a function evaluating to nil. This
-rarely happens in practice.
-
-(fn &optional ARG)" t)
-(autoload 'scan-buf-previous-region "help-at-pt" "\
-Go to the start of the previous region with non-nil help-echo.
-Print the help found there using `display-local-help'. Adjacent
-areas with different non-nil help-echo properties are considered
-different regions. With numeric argument ARG, behaves like
-`scan-buf-next-region' with argument -ARG.
-
-(fn &optional ARG)" t)
-(register-definition-prefixes "help-at-pt" '("help-at-pt-" "scan-buf-move-hook"))
\f
;;; Generated autoloads from help-fns.el
(fn &optional DIARY-FILENAME DO-NOT-ASK NON-MARKING)" t)
(register-definition-prefixes "icalendar" '("icalendar-"))
-\f
-;;; Generated autoloads from icomplete.el
-
-(defvar fido-mode nil "\
-Non-nil if Fido mode is enabled.
-See the `fido-mode' command
-for a description of this minor mode.
-Setting this variable directly does not take effect;
-either customize it (see the info node `Easy Customization')
-or call the function `fido-mode'.")
-(custom-autoload 'fido-mode "icomplete" nil)
-(autoload 'fido-mode "icomplete" "\
-An enhanced `icomplete-mode' that emulates `ido-mode'.
-
-This global minor mode makes minibuffer completion behave
-more like `ido-mode' than regular `icomplete-mode'.
-
-This is a global minor mode. If called interactively, toggle the `Fido
-mode' mode. If the prefix argument is positive, enable the mode, and if
-it is zero or negative, disable the mode.
-
-If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
-mode if ARG is nil, omitted, or is a positive number. Disable the mode
-if ARG is a negative number.
-
-To check whether the minor mode is enabled in the current buffer,
-evaluate `(default-value \\='fido-mode)'.
-
-The mode's hook is called both when the mode is enabled and when it is
-disabled.
-
-(fn &optional ARG)" t)
-(defvar icomplete-mode nil "\
-Non-nil if Icomplete mode is enabled.
-See the `icomplete-mode' command
-for a description of this minor mode.
-Setting this variable directly does not take effect;
-either customize it (see the info node `Easy Customization')
-or call the function `icomplete-mode'.")
-(custom-autoload 'icomplete-mode "icomplete" nil)
-(autoload 'icomplete-mode "icomplete" "\
-Toggle incremental minibuffer completion (Icomplete mode).
-
-When this global minor mode is enabled, typing in the minibuffer
-continuously displays a list of possible completions that match
-the string you have typed. See `icomplete-completions' for a
-description of how prospective completions are displayed.
-
-For more information, see Info node `(emacs)Icomplete'.
-For options you can set, `\\[customize-group] icomplete'.
-
-You can use the following key bindings to navigate and select
-completions:
-
-\\{icomplete-minibuffer-map}
-
-This is a global minor mode. If called interactively, toggle the
-`Icomplete mode' mode. If the prefix argument is positive, enable the
-mode, and if it is zero or negative, disable the mode.
-
-If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
-mode if ARG is nil, omitted, or is a positive number. Disable the mode
-if ARG is a negative number.
-
-To check whether the minor mode is enabled in the current buffer,
-evaluate `(default-value \\='icomplete-mode)'.
-
-The mode's hook is called both when the mode is enabled and when it is
-disabled.
-
-(fn &optional ARG)" t)
-(defvar icomplete-vertical-mode nil "\
-Non-nil if Icomplete-Vertical mode is enabled.
-See the `icomplete-vertical-mode' command
-for a description of this minor mode.
-Setting this variable directly does not take effect;
-either customize it (see the info node `Easy Customization')
-or call the function `icomplete-vertical-mode'.")
-(custom-autoload 'icomplete-vertical-mode "icomplete" nil)
-(autoload 'icomplete-vertical-mode "icomplete" "\
-Toggle vertical candidate display in `icomplete-mode' or `fido-mode'.
-
-If none of these modes are on, turn on `icomplete-mode'.
-
-As many completion candidates as possible are displayed, depending on
-the value of `max-mini-window-height', and the way the mini-window is
-resized depends on `resize-mini-windows'.
-
-This is a global minor mode. If called interactively, toggle the
-`Icomplete-Vertical mode' mode. If the prefix argument is positive,
-enable the mode, and if it is zero or negative, disable the mode.
-
-If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
-mode if ARG is nil, omitted, or is a positive number. Disable the mode
-if ARG is a negative number.
-
-To check whether the minor mode is enabled in the current buffer,
-evaluate `(default-value \\='icomplete-vertical-mode)'.
-
-The mode's hook is called both when the mode is enabled and when it is
-disabled.
-
-(fn &optional ARG)" t)
-(defvar fido-vertical-mode nil "\
-Non-nil if Fido-Vertical mode is enabled.
-See the `fido-vertical-mode' command
-for a description of this minor mode.
-Setting this variable directly does not take effect;
-either customize it (see the info node `Easy Customization')
-or call the function `fido-vertical-mode'.")
-(custom-autoload 'fido-vertical-mode "icomplete" nil)
-(autoload 'fido-vertical-mode "icomplete" "\
-Toggle vertical candidate display in `fido-mode'.
-
-When turning on, if non-vertical `fido-mode' is off, turn it on.
-If it's on, just add the vertical display.
-
-This is a global minor mode. If called interactively, toggle the
-`Fido-Vertical mode' mode. If the prefix argument is positive, enable
-the mode, and if it is zero or negative, disable the mode.
-
-If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
-mode if ARG is nil, omitted, or is a positive number. Disable the mode
-if ARG is a negative number.
-
-To check whether the minor mode is enabled in the current buffer,
-evaluate `(default-value \\='fido-vertical-mode)'.
-
-The mode's hook is called both when the mode is enabled and when it is
-disabled.
-
-(fn &optional ARG)" t)
-(register-definition-prefixes "icomplete" '("icomplete-"))
-
\f
;;; Generated autoloads from progmodes/icon.el
(fn ICON)" t)
(register-definition-prefixes "icons" '("button" "define-icon" "icon"))
-\f
-;;; Generated autoloads from ido.el
-
-(defvar ido-mode nil "\
-Determines for which buffer/file Ido should be enabled.
-The following values are possible:
-- `buffer': Turn only on Ido buffer behavior (switching, killing,
- displaying...)
-- `file': Turn only on Ido file behavior (finding, writing, inserting...)
-- `both': Turn on Ido buffer and file behavior.
-- nil: Turn off any Ido switching.
-
-Setting this variable directly does not take effect;
-use either \\[customize] or the function `ido-mode'.")
-(custom-autoload 'ido-mode "ido" nil)
-(autoload 'ido-mode "ido" "\
-Toggle Ido mode on or off.
-With ARG, turn Ido mode on if arg is positive, off otherwise.
-Turning on Ido mode will remap (via a minor-mode keymap) the default
-keybindings for the `find-file' and `switch-to-buffer' families of
-commands to the Ido versions of these functions.
-However, if ARG arg equals `files', remap only commands for files, or
-if it equals `buffers', remap only commands for buffer switching.
-This function also adds a hook to the minibuffer.
-
-(fn &optional ARG)" t)
-(autoload 'ido-switch-buffer "ido" "\
-Switch to another buffer.
-The buffer is displayed according to `ido-default-buffer-method' -- the
-default is to show it in the same window, unless it is already visible
-in another frame.
-
-As you type in a string, all of the buffers matching the string are
-displayed if substring-matching is used (default). Look at
-`ido-enable-prefix' and `ido-toggle-prefix'. When you have found the
-buffer you want, it can then be selected. As you type, most keys have
-their normal keybindings, except for the following: \\<ido-buffer-completion-map>
-
-RET Select the buffer at the front of the list of matches.
- If the list is empty, possibly prompt to create new buffer.
-
-\\[ido-select-text] Use the current input string verbatim.
-
-\\[ido-next-match] Put the first element at the end of the list.
-\\[ido-prev-match] Put the last element at the start of the list.
-\\[ido-complete] Complete a common suffix to the current string that matches
- all buffers. If there is only one match, select that buffer.
- If there is no common suffix, show a list of all matching buffers
- in a separate window.
-\\[ido-edit-input] Edit input string.
-\\[ido-fallback-command] Fallback to non-ido version of current command.
-\\[ido-toggle-regexp] Toggle regexp searching.
-\\[ido-toggle-prefix] Toggle between substring and prefix matching.
-\\[ido-toggle-case] Toggle case-sensitive searching of buffer names.
-\\[ido-completion-help] Show list of matching buffers in separate window.
-\\[ido-enter-find-file] Drop into `ido-find-file'.
-\\[ido-kill-buffer-at-head] Kill buffer at head of buffer list.
-\\[ido-toggle-ignore] Toggle ignoring buffers listed in `ido-ignore-buffers'." t)
-(autoload 'ido-switch-buffer-other-window "ido" "\
-Switch to another buffer and show it in another window.
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'." t)
-(autoload 'ido-display-buffer "ido" "\
-Display a buffer in another window but don't select it.
-
-If ACTION (the prefix argument interactively), display the buffer
-in another windown even if it's already displayed in the current
-window.
-
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'.
-
-(fn &optional ACTION)" t)
-(autoload 'ido-display-buffer-other-frame "ido" "\
-Display a buffer preferably in another frame.
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'." t)
-(autoload 'ido-kill-buffer "ido" "\
-Kill a buffer.
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'." t)
-(autoload 'ido-insert-buffer "ido" "\
-Insert contents of a buffer in current buffer after point.
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'." t)
-(autoload 'ido-switch-buffer-other-frame "ido" "\
-Switch to another buffer and show it in another frame.
-The buffer name is selected interactively by typing a substring.
-For details of keybindings, see `ido-switch-buffer'." t)
-(autoload 'ido-find-file-in-dir "ido" "\
-Switch to another file starting from DIR.
-
-(fn DIR)" t)
-(autoload 'ido-find-file "ido" "\
-Edit file with name obtained via minibuffer.
-The file is displayed according to `ido-default-file-method' -- the
-default is to show it in the same window, unless it is already visible
-in another frame.
-
-The file name is selected interactively by typing a substring. As you
-type in a string, all of the filenames matching the string are displayed
-if substring-matching is used (default). Look at `ido-enable-prefix' and
-`ido-toggle-prefix'. When you have found the filename you want, it can
-then be selected. As you type, most keys have their normal keybindings,
-except for the following: \\<ido-file-completion-map>
-
-RET Select the file at the front of the list of matches.
- If the list is empty, possibly prompt to create new file.
-
-\\[ido-select-text] Use the current input string verbatim.
-
-\\[ido-next-match] Put the first element at the end of the list.
-\\[ido-prev-match] Put the last element at the start of the list.
-\\[ido-complete] Complete a common suffix to the current string that matches
- all files. If there is only one match, select that file.
- If there is no common suffix, show a list of all matching files
- in a separate window.
-\\[ido-magic-delete-char] Open the specified directory in Dired mode.
-\\[ido-edit-input] Edit input string (including directory).
-\\[ido-prev-work-directory] Go to previous directory in work directory history.
-\\[ido-next-work-directory] Go to next directory in work directory history.
-\\[ido-merge-work-directories] Search for file in the work directory history.
-\\[ido-forget-work-directory] Remove current directory from the work directory history.
-\\[ido-prev-work-file] Cycle to previous file in work file history.
-\\[ido-next-work-file] Cycle to next file in work file history.
-\\[ido-wide-find-file-or-pop-dir] Prompt for a file and use find to locate it.
-\\[ido-wide-find-dir-or-delete-dir] Prompt for a directory and use find to locate it.
-\\[ido-make-directory] Prompt for a directory to create in current directory.
-\\[ido-fallback-command] Fallback to non-Ido version of current command.
-\\[ido-toggle-regexp] Toggle regexp searching.
-\\[ido-toggle-prefix] Toggle between substring and prefix matching.
-\\[ido-toggle-case] Toggle case-sensitive searching of file names.
-\\[ido-toggle-literal] Toggle literal reading of this file.
-\\[ido-completion-help] Show list of matching files in separate window.
-\\[ido-toggle-ignore] Toggle ignoring files listed in `ido-ignore-files'.
-\\[ido-reread-directory] Reread the current directory." t)
-(autoload 'ido-find-file-other-window "ido" "\
-Switch to another file and show it in another window.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-alternate-file "ido" "\
-Find another file, select its buffer, kill previous buffer.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-alternate-file-other-window "ido" "\
-Find file as a replacement for the file in the next window.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-file-read-only "ido" "\
-Edit file read-only with name obtained via minibuffer.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-file-read-only-other-window "ido" "\
-Edit file read-only in other window with name obtained via minibuffer.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-file-read-only-other-frame "ido" "\
-Edit file read-only in other frame with name obtained via minibuffer.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-display-file "ido" "\
-Display a file in another window but don't select it.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-find-file-other-frame "ido" "\
-Switch to another file and show it in another frame.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-write-file "ido" "\
-Write current buffer to a file.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-insert-file "ido" "\
-Insert contents of file in current buffer.
-The file name is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-dired "ido" "\
-Call `dired' the Ido way.
-The directory is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-dired-other-window "ido" "\
-\"Edit\" a directory. Like `ido-dired' but select in another window.
-The directory is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-dired-other-frame "ido" "\
-\"Edit\" a directory. Like `ido-dired' but make a new frame.
-The directory is selected interactively by typing a substring.
-For details of keybindings, see `ido-find-file'." t)
-(autoload 'ido-read-buffer "ido" "\
-Ido replacement for the built-in `read-buffer'.
-Return the name of a buffer selected.
-PROMPT is the prompt to give to the user. DEFAULT if given is the default
-buffer to be selected, which will go to the front of the list.
-If REQUIRE-MATCH is non-nil, an existing buffer must be selected.
-Optional arg PREDICATE if non-nil is a function limiting the
-buffers that can be considered.
-
-(fn PROMPT &optional DEFAULT REQUIRE-MATCH PREDICATE)")
-(autoload 'ido-read-file-name "ido" "\
-Ido replacement for the built-in `read-file-name'.
-Read file name, prompting with PROMPT and completing in directory DIR.
-See `read-file-name' for additional parameters.
-
-(fn PROMPT &optional DIR DEFAULT-FILENAME MUSTMATCH INITIAL PREDICATE)")
-(autoload 'ido-read-directory-name "ido" "\
-Ido replacement for the built-in `read-directory-name'.
-Read directory name, prompting with PROMPT and completing in directory DIR.
-See `read-directory-name' for additional parameters.
-
-(fn PROMPT &optional DIR DEFAULT-DIRNAME MUSTMATCH INITIAL)")
-(autoload 'ido-completing-read "ido" "\
-Ido replacement for the built-in `completing-read'.
-Read a string in the minibuffer with Ido-style completion.
-PROMPT is a string to prompt with; normally it ends in a colon and a space.
-CHOICES is a list of strings which are the possible completions.
-PREDICATE and INHERIT-INPUT-METHOD are currently ignored; they are included
- to be compatible with `completing-read'.
-If REQUIRE-MATCH is non-nil, the user is not allowed to exit unless
- the input is (or completes to) an element of CHOICES or is null.
- If the input is null, `ido-completing-read' returns DEF, or an empty
- string if DEF is nil, regardless of the value of REQUIRE-MATCH.
-If INITIAL-INPUT is non-nil, insert it in the minibuffer initially,
- with point positioned at the end.
-HIST, if non-nil, specifies a history list.
-DEF, if non-nil, is the default value.
-
-(fn PROMPT CHOICES &optional PREDICATE REQUIRE-MATCH INITIAL-INPUT HIST DEF INHERIT-INPUT-METHOD)")
-(register-definition-prefixes "ido" '("ido-"))
-
\f
;;; Generated autoloads from ielm.el
Start Dired in the current project's root." t)
(autoload 'project-vc-dir "project" "\
Run VC-Dir in the current project's root." t)
+(autoload 'project-customize-dirlocals "project" "\
+Run `customize-dirlocals' in current project's root." t)
(autoload 'project-shell "project" "\
Start an inferior shell in the current project's root directory.
If a buffer already exists for running a shell in the project's root,
(fn &optional ARG)" t)
(register-definition-prefixes "refactor-simple" '("refactor-simple-"))
-\f
-;;; Generated autoloads from textmodes/refbib.el
-
-(register-definition-prefixes "refbib" '("r2b-"))
-
-\f
-;;; Generated autoloads from textmodes/refer.el
-
-(register-definition-prefixes "refer" '("refer-"))
-
\f
;;; Generated autoloads from textmodes/refill.el
Go into the treesit generic mode MODE.
(fn LANG SOURCE)")
-(register-definition-prefixes "treesit-x" '("gitattributes-generic-ts-mode" "treesit-generic-mode-font-lock-"))
+(register-definition-prefixes "treesit-x" '("alpinejs-generic-ts-" "gitattributes-generic-ts-mode" "liquid-generic-ts-mode" "treesit-generic-mode-font-lock-"))
\f
;;; Generated autoloads from tty-tip.el
(vc-cvs-registered f)))
(register-definition-prefixes "vc-cvs" '("vc-cvs-"))
-\f
-;;; Generated autoloads from vc/vc-dav.el
-
-(register-definition-prefixes "vc-dav" '("vc-dav-"))
-
\f
;;; Generated autoloads from vc/vc-dir.el
projects / emacs.git / commitdiff