Fix spellings.

diff --git a/lispintro/emacs-lisp-intro.texi b/lispintro/emacs-lisp-intro.texi
index 3714e010d1831ad430a1dbb62291c1f459d2fcf5..cb2396975dc8f6ad2e8904ee7980a354f9a90c49 100644 (file)
--- a/lispintro/emacs-lisp-intro.texi
+++ b/lispintro/emacs-lisp-intro.texi
@@ -7319,7 +7319,7 @@ this:
 
 The part within quotation marks, @code{"*p\ncZap to char:@: "}, specifies
 three different things.  First, and most simply, the asterisk, @samp{*},
-causes an error to be signalled if the buffer is read-only.  This means that
+causes an error to be signaled if the buffer is read-only.  This means that
 if you try @code{zap-to-char} in a read-only buffer you will not be able to
 remove text, and you will receive a message that says ``Buffer is
 read-only''; your terminal may beep at you as well.

diff --git a/lispref/anti.texi b/lispref/anti.texi
index c7a72f04df83f4868f3a81301bed7b72831124d1..c1aa680525a3ed45e678d71be75327dd5fd516b7 100644 (file)
--- a/lispref/anti.texi
+++ b/lispref/anti.texi
@@ -386,7 +386,7 @@ previously autoloaded.
 @item
 There is a new variable, @code{recursive-load-depth-limit}, which
 specifies how many times files can recursively load themselves; it is
-50 by default, and nil means infinity.  Previously, Emacs signalled an
+50 by default, and nil means infinity.  Previously, Emacs signaled an
 error after just 3 recursive loads, which was boring.
 
 @item

diff --git a/lispref/control.texi b/lispref/control.texi
index 760e7bb82dee7ca0c9e385429c20bcdffd8bec80..573a32b1cde88e291d6ce4da1dad4c640b54a91a 100644 (file)
--- a/lispref/control.texi
+++ b/lispref/control.texi
@@ -733,7 +733,7 @@ instead.  @xref{Catch and Throw}.
 @subsubsection How to Signal an Error
 @cindex signaling errors
 
-   @dfn{Signalling} an error means beginning error processing.  Error
+   @dfn{Signaling} an error means beginning error processing.  Error
 processing normally aborts all or part of the running program and
 returns to a point that is set up to handle the error
 (@pxref{Processing of Errors}).  Here we describe how to signal an

diff --git a/lispref/frames.texi b/lispref/frames.texi
index 10035b76f9fb8d2eb12767d4ae50397f338aef98..13921c0b6fc7d22ca22c202c5e63856911e8f251 100644 (file)
--- a/lispref/frames.texi
+++ b/lispref/frames.texi
@@ -1990,7 +1990,7 @@ quickly.
 @tindex display-planes
 This function returns the number of planes the display supports.
 This is typically the number of bits per pixel.
-For a tty display, it is log to base two of the number of colours supported.
+For a tty display, it is log to base two of the number of colors supported.
 @end defun
 
 @defun display-visual-class &optional display

diff --git a/man/gnus.texi b/man/gnus.texi
index 7db039969840a65c31954059435f2766d05e42e3..dd736cd81627f63b1e0864d3040726fe0f912531 100644 (file)
--- a/man/gnus.texi
+++ b/man/gnus.texi
@@ -16497,7 +16497,7 @@ Nnmail equivalent: @code{nnmail-split-fancy}.
 Set to non-@code{nil} to download entire articles during splitting.
 This is generally not required, and will slow things down
 considerably.  You may need it if you want to use an advanced
-splitting function that analyses the body to split the article.
+splitting function that analyzes the body to split the article.
 
 @end table
 

diff --git a/man/message.texi b/man/message.texi
index 01b3f9105d069c3822b668ec94ce1a95abbf1430..20a89debcc564fd991a00d48b51a1c3caba7265a 100644 (file)
--- a/man/message.texi
+++ b/man/message.texi
@@ -419,7 +419,7 @@ This is how you would do it.
 
 @vindex message-subscribed-address-file
 @item message-subscribed-address-file
-You might be one organised human freak and have a list of addresses of
+You might be one organized human freak and have a list of addresses of
 all subscribed mailing lists in a separate file!  Then you can just
 set this variable to the name of the file and life would be good.
 

diff --git a/man/tramp.texi b/man/tramp.texi
index 854dbba5919369da8ba38be0652ae73e847e9ae0..5b406cb1662ffcd87dd1459e560354e7187029ee 100644 (file)
--- a/man/tramp.texi
+++ b/man/tramp.texi
@@ -99,7 +99,7 @@ If you want to read the info pages for @value{emacsothername}, you
 should read in @ref{Installation} how to create them.
 @end ifinfo
 @ifhtml
-If you're using the other Emacs flavour, you should read the
+If you're using the other Emacs flavor, you should read the
 @uref{@value{emacsotherfilename}, @value{emacsothername}} pages.
 @end ifhtml
 @end ifset

diff --git a/man/url.texi b/man/url.texi
index 0380b833ed8f261d4219b9a57e7f5d039f5b7b1d..cccd79a0e7e4012e09fe658869344b627da974d3 100644 (file)
--- a/man/url.texi
+++ b/man/url.texi
@@ -850,22 +850,22 @@ initialized from the environment as above.
 The library provides a general gateway layer through which all
 networking passes.  It can both control access to the network and
 provide access through gateways in firewalls.  This may make direct
-connexions in some cases and pass through some sort of gateway in
+connections in some cases and pass through some sort of gateway in
 others.@footnote{Proxies (which only operate over HTTP) are
 implemented using this.}  The library's basic function responsible for
-making connexions is @code{url-open-stream}.
+making connections is @code{url-open-stream}.
 
 @defun url-open-stream name buffer host service
 @cindex opening a stream
 @cindex stream, opening
 Open a stream to @var{host}, possibly via a gateway.  The other
 arguments are as for @code{open-network-stream}.  This will not make a
-connexion if @code{url-gateway-unplugged} is non-@code{nil}.
+connection if @code{url-gateway-unplugged} is non-@code{nil}.
 @end defun
 
 @defvar url-gateway-local-host-regexp
 This is a regular expression that matches local hosts that do not
-require the use of a gateway.  If @code{nil}, all connexions are made
+require the use of a gateway.  If @code{nil}, all connections are made
 through the gateway.
 @end defvar
 
@@ -987,26 +987,26 @@ This the @samp{nslookup} program.  It is @code{"nslookup"} by default.
 @end defopt
 
 @menu
-* Suppressing network connexions::
+* Suppressing network connections::
 @end menu
 @c * Broken hostname resolution::
 
-@node Suppressing network connexions
-@subsection Suppressing Network Connexions
+@node Suppressing network connections
+@subsection Suppressing Network Connections
 
-@cindex network connexions, suppressing
-@cindex suppressing network connexions
+@cindex network connections, suppressing
+@cindex suppressing network connections
 @cindex bugs, HTML
 @cindex HTML `bugs'
 In some circumstances it is desirable to suppress making network
-connexions.  A typical case is when rendering HTML in a mail user
+connections.  A typical case is when rendering HTML in a mail user
 agent, when external URLs should not be activated, particularly to
 avoid `bugs' which `call home' by fetch single-pixel images and the
 like.  To arrange this, bind the following variable for the duration
 of such processing.
 
 @defvar url-gateway-unplugged
-If this variable is non-@code{nil} new network connexions are never
+If this variable is non-@code{nil} new network connections are never
 opened by the URL library.
 @end defvar
 
@@ -1152,7 +1152,7 @@ only if an affirmative answer is given.
 @end defopt
 @defopt url-gateway-method
 @c fixme: describe gatewaying
-A symbol specifying the type of gateway support to use fro connexions
+A symbol specifying the type of gateway support to use for connections
 from the local machine.  The supported methods are:
 
 @table @code