@menu
* Compilation:: Compiling programs in languages other
than Lisp (C, Pascal, etc.).
-* Grep Searching:: Running grep as if it were a compiler.
* Compilation Mode:: The mode for visiting compiler errors.
* Compilation Shell:: Customizing your shell properly
for use in the compilation buffer.
+* Grep Searching:: Searching with grep.
* Debuggers:: Running symbolic debuggers for non-Lisp programs.
* Executing Lisp:: Various modes for editing Lisp programs,
with different facilities for running
the form @code{"@var{envvarname}=@var{value}"}. These environment
variable settings override the usual ones.
-@node Grep Searching
-@section Searching with Grep under Emacs
-
-@findex grep
- Just as you can run a compiler from Emacs and then visit the lines
-where there were compilation errors, you can also run @code{grep} and
-then visit the lines on which matches were found. This works by
-treating the matches reported by @code{grep} as if they were ``errors.''
-
- To do this, type @kbd{M-x grep}, then enter a command line that
-specifies how to run @code{grep}. Use the same arguments you would give
-@code{grep} when running it normally: a @code{grep}-style regexp
-(usually in single-quotes to quote the shell's special characters)
-followed by file names, which may use wildcards. The output from
-@code{grep} goes in the @samp{*grep*} buffer. You can find the
-corresponding lines in the original files using @kbd{C-x `} and
-@key{RET}, as with compilation errors.
-
- If you specify a prefix argument for @kbd{M-x grep}, it figures out
-the tag (@pxref{Tags}) around point, and puts that into the default
-@code{grep} command.
-
-@findex grep-find
-@findex find-grep
- The command @kbd{M-x grep-find} (also available as @kbd{M-x
-find-grep}) is similar to @kbd{M-x grep}, but it supplies a different
-initial default for the command---one that runs both @code{find} and
-@code{grep}, so as to search every file in a directory tree. See also
-the @code{find-grep-dired} command, in @ref{Dired and Find}.
-
@node Compilation Mode
@section Compilation Mode
This command is used in the compilation buffer.
@item Mouse-2
Visit the locus of the error message that you click on.
+@item M-n
+Find and highlight the locus of the next error message, without
+selecting the source buffer.
+@item M-p
+Find and highlight the locus of the previous error message, without
+selecting the source buffer.
+@item M-@}
+Move point to the next error for a different file than the current
+one.
+@item M-@{
+Move point to the previous error for a different file than the current
+one.
+@item C-c C-f
+Toggle Next Error Follow minor mode, which makes cursor motion in the
+compilation buffer produce automatic source display.
@end table
@kindex C-x `
click @kbd{Mouse-2} on the error message; you need not switch to the
@samp{*compilation*} buffer first.
+@vindex next-error-highlight
To parse the compiler error messages sequentially, type @kbd{C-x `}
(@code{next-error}). The character following the @kbd{C-x} is the
backquote or ``grave accent,'' not the single-quote. This command is
-available in all buffers, not just in @samp{*compilation*}; it displays
-the next error message at the top of one window and source location of
-the error in another window.
+available in all buffers, not just in @samp{*compilation*}; it
+displays the next error message at the top of one window and source
+location of the error in another window. It also momentarily
+highlights the relevant source line. You can change the behavior of
+this highlighting with the variable @code{next-error-highlight}.
The first time @kbd{C-x `} is used after the start of a compilation,
it moves to the first error's location. Subsequent uses of @kbd{C-x `}
that list. A similar variable @code{grep-regexp-alist} tells Emacs how
to parse output of a @code{grep} command.
+@findex compilation-next-error
+@findex compilation-previous-error
+@findex compilation-next-file
+@findex compilation-previous-file
Compilation mode also redefines the keys @key{SPC} and @key{DEL} to
-scroll by screenfuls, and @kbd{M-n} and @kbd{M-p} to move to the next or
-previous error message. You can also use @kbd{M-@{} and @kbd{M-@}} to
-move up or down to an error message for a different source file.
+scroll by screenfuls, and @kbd{M-n} (@code{compilation-next-error})
+and @kbd{M-p} (@code{compilation-previous-error}) to move to the next
+or previous error message. You can also use @kbd{M-@{}
+(@code{compilation-next-file} and @kbd{M-@}}
+(@code{compilation-previous-file}) to move up or down to an error
+message for a different source file.
+
+@cindex Next Error Follow mode
+@findex next-error-follow-minor-mode
+ You can type @kbd{C-c C-f} to toggle Next Error Follow mode. In
+this minor mode, ordinary cursor motion in the compilation buffer
+automatically updates the source buffer. For instance, moving the
+cursor to the next error message causes the location of that error to
+be displayed immediately.
The features of Compilation mode are also available in a minor mode
called Compilation Minor mode. This lets you parse error messages in
wait until the command finishes before you can do anything else in
Emacs. @xref{MS-DOS}.
+@node Grep Searching
+@section Searching with Grep under Emacs
+
+@findex grep
+ Just as you can run a compiler from Emacs and then visit the lines
+where there were compilation errors, you can also run @code{grep} and
+then visit the lines on which matches were found. This works by
+treating the matches reported by @code{grep} as if they were ``errors.''
+
+ To do this, type @kbd{M-x grep}, then enter a command line that
+specifies how to run @code{grep}. Use the same arguments you would give
+@code{grep} when running it normally: a @code{grep}-style regexp
+(usually in single-quotes to quote the shell's special characters)
+followed by file names, which may use wildcards. If you specify a
+prefix argument for @kbd{M-x grep}, it figures out the tag
+(@pxref{Tags}) around point, and puts that into the default
+@code{grep} command.
+
+ The output from @code{grep} goes in the @samp{*grep*} buffer. You
+can find the corresponding lines in the original files using @kbd{C-x
+`}, @key{RET}, and so forth, just like compilation errors.
+
+ Some grep programs accept a @samp{--color} option to output special
+markers around matches for the purpose of highlighting. You can make
+use of this feature by setting @code{grep-highlight-matches} to t.
+When displaying a match in the source buffer, the exact match will be
+highlighted, instead of the entire source line.
+
+@findex grep-find
+@findex find-grep
+ The command @kbd{M-x grep-find} (also available as @kbd{M-x
+find-grep}) is similar to @kbd{M-x grep}, but it supplies a different
+initial default for the command---one that runs both @code{find} and
+@code{grep}, so as to search every file in a directory tree. See also
+the @code{find-grep-dired} command, in @ref{Dired and Find}.
+
@node Debuggers
@section Running Debuggers Under Emacs
@cindex debuggers
@cindex SDB
@cindex XDB
@cindex Perldb
+@cindex bashdb
@cindex JDB
@cindex PDB
requires a valid tags table to work}. If this happens, generate a valid
tags table in the working directory and try again.
+@item M-x bashdb @key{RET} @var{file} @key{RET}
+@findex bashdb
+Run the bash debugger to debug @var{file}, a shell script.
+
@item M-x perldb @key{RET} @var{file} @key{RET}
@findex perldb
Run the Perl interpreter in debug mode to debug @var{file}, a Perl program.
echo area. It is available in all major modes, not just Emacs-Lisp
mode. It does not treat @code{defvar} specially.
+ When the result of an evaluation is an integer, you can type
+@kbd{C-x C-e} a second time to display the value of the integer result
+in additional formats (octal, hexadecimal, and character).
+
If @kbd{C-M-x}, @kbd{C-x C-e}, or @kbd{M-:} is given a numeric
argument, it inserts the value into the current buffer at point, rather
than displaying it in the echo area. The argument's value does not
projects / emacs.git / commitdiff