\global\everypar = {}%
}
-% leave vertical mode without canceling any first paragraph indent
+% leave vertical mode without cancelling any first paragraph indent
\gdef\imageindent{%
\toks0=\everypar
\everypar={}%
GL_GENERATE_LIMITS_H_CONDITION = @GL_GENERATE_LIMITS_H_CONDITION@
GL_GENERATE_MINI_GMP_H_CONDITION = @GL_GENERATE_MINI_GMP_H_CONDITION@
GL_GENERATE_STDALIGN_H_CONDITION = @GL_GENERATE_STDALIGN_H_CONDITION@
+GL_GENERATE_STDCKDINT_H_CONDITION = @GL_GENERATE_STDCKDINT_H_CONDITION@
GL_GENERATE_STDDEF_H_CONDITION = @GL_GENERATE_STDDEF_H_CONDITION@
GL_GENERATE_STDINT_H_CONDITION = @GL_GENERATE_STDINT_H_CONDITION@
GL_GNULIB_ACCESS = @GL_GNULIB_ACCESS@
SETTINGS_LIBS = @SETTINGS_LIBS@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZEOF_LONG = @SIZEOF_LONG@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
SMALL_JA_DIC = @SMALL_JA_DIC@
SQLITE3_LIBS = @SQLITE3_LIBS@
STDALIGN_H = @STDALIGN_H@
+STDCKDINT_H = @STDCKDINT_H@
STDDEF_H = @STDDEF_H@
STDINT_H = @STDINT_H@
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
gl_GNULIB_ENABLED_open_CONDITION = @gl_GNULIB_ENABLED_open_CONDITION@
gl_GNULIB_ENABLED_rawmemchr_CONDITION = @gl_GNULIB_ENABLED_rawmemchr_CONDITION@
gl_GNULIB_ENABLED_scratch_buffer_CONDITION = @gl_GNULIB_ENABLED_scratch_buffer_CONDITION@
+gl_GNULIB_ENABLED_stdckdint_CONDITION = @gl_GNULIB_ENABLED_stdckdint_CONDITION@
gl_GNULIB_ENABLED_strtoll_CONDITION = @gl_GNULIB_ENABLED_strtoll_CONDITION@
gl_GNULIB_ENABLED_utimens_CONDITION = @gl_GNULIB_ENABLED_utimens_CONDITION@
gl_LIBOBJDEPS = @gl_LIBOBJDEPS@
ifeq (,$(OMIT_GNULIB_MODULE_intprops))
-EXTRA_DIST += intprops.h
+EXTRA_DIST += intprops-internal.h intprops.h
endif
## end gnulib module intprops
endif
## end gnulib module stdalign
+## begin gnulib module stdckdint
+ifeq (,$(OMIT_GNULIB_MODULE_stdckdint))
+
+ifneq (,$(gl_GNULIB_ENABLED_stdckdint_CONDITION))
+BUILT_SOURCES += $(STDCKDINT_H)
+
+# We need the following in order to create <stdckdint.h> when the system
+# doesn't have one that works with the given compiler.
+ifneq (,$(GL_GENERATE_STDCKDINT_H_CONDITION))
+stdckdint.h: stdckdint.in.h $(top_builddir)/config.status
+ $(gl_V_at)$(SED_HEADER_STDOUT) \
+ $(srcdir)/stdckdint.in.h > $@-t
+ $(AM_V_at)mv $@-t $@
+else
+stdckdint.h: $(top_builddir)/config.status
+ rm -f $@
+endif
+MOSTLYCLEANFILES += stdckdint.h stdckdint.h-t
+
+endif
+EXTRA_DIST += intprops-internal.h stdckdint.in.h
+
+endif
+## end gnulib module stdckdint
+
## begin gnulib module stddef
ifeq (,$(OMIT_GNULIB_MODULE_stddef))
/* Specification. */
#include <unistd.h>
+#include <stdckdint.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdlib.h>
-#include "intprops.h"
-
/* Most processes have no more than this many groups, and for these
processes we can avoid using malloc. */
enum { GROUPBUF_SIZE = 100 };
{
int n_group_slots = getgroups (0, NULL);
size_t nbytes;
- if (! INT_MULTIPLY_WRAPV (n_group_slots, sizeof *gi->group, &nbytes))
+ if (! ckd_mul (&nbytes, n_group_slots, sizeof *gi->group))
{
gi->group = malloc (nbytes);
if (gi->group)
--- /dev/null
+/* intprops-internal.h -- properties of integer types not visible to users
+
+ Copyright (C) 2001-2022 Free Software Foundation, Inc.
+
+ This program is free software: you can redistribute it and/or modify it
+ under the terms of the GNU Lesser General Public License as published
+ by the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with this program. If not, see <https://www.gnu.org/licenses/>. */
+
+#ifndef _GL_INTPROPS_INTERNAL_H
+#define _GL_INTPROPS_INTERNAL_H
+
+#include <limits.h>
+
+/* Return a value with the common real type of E and V and the value of V.
+ Do not evaluate E. */
+#define _GL_INT_CONVERT(e, v) ((1 ? 0 : (e)) + (v))
+
+/* Act like _GL_INT_CONVERT (E, -V) but work around a bug in IRIX 6.5 cc; see
+ <https://lists.gnu.org/r/bug-gnulib/2011-05/msg00406.html>. */
+#define _GL_INT_NEGATE_CONVERT(e, v) ((1 ? 0 : (e)) - (v))
+
+/* The extra casts in the following macros work around compiler bugs,
+ e.g., in Cray C 5.0.3.0. */
+
+/* True if the real type T is signed. */
+#define _GL_TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
+
+/* Return 1 if the real expression E, after promotion, has a
+ signed or floating type. Do not evaluate E. */
+#define _GL_EXPR_SIGNED(e) (_GL_INT_NEGATE_CONVERT (e, 1) < 0)
+
+
+/* Minimum and maximum values for integer types and expressions. */
+
+/* The width in bits of the integer type or expression T.
+ Do not evaluate T. T must not be a bit-field expression.
+ Padding bits are not supported; this is checked at compile-time below. */
+#define _GL_TYPE_WIDTH(t) (sizeof (t) * CHAR_BIT)
+
+/* The maximum and minimum values for the type of the expression E,
+ after integer promotion. E is not evaluated. */
+#define _GL_INT_MINIMUM(e) \
+ (_GL_EXPR_SIGNED (e) \
+ ? ~ _GL_SIGNED_INT_MAXIMUM (e) \
+ : _GL_INT_CONVERT (e, 0))
+#define _GL_INT_MAXIMUM(e) \
+ (_GL_EXPR_SIGNED (e) \
+ ? _GL_SIGNED_INT_MAXIMUM (e) \
+ : _GL_INT_NEGATE_CONVERT (e, 1))
+#define _GL_SIGNED_INT_MAXIMUM(e) \
+ (((_GL_INT_CONVERT (e, 1) << (_GL_TYPE_WIDTH (+ (e)) - 2)) - 1) * 2 + 1)
+
+/* Work around OpenVMS incompatibility with C99. */
+#if !defined LLONG_MAX && defined __INT64_MAX
+# define LLONG_MAX __INT64_MAX
+# define LLONG_MIN __INT64_MIN
+#endif
+
+/* This include file assumes that signed types are two's complement without
+ padding bits; the above macros have undefined behavior otherwise.
+ If this is a problem for you, please let us know how to fix it for your host.
+ This assumption is tested by the intprops-tests module. */
+
+/* Does the __typeof__ keyword work? This could be done by
+ 'configure', but for now it's easier to do it by hand. */
+#if (2 <= __GNUC__ \
+ || (4 <= __clang_major__) \
+ || (1210 <= __IBMC__ && defined __IBM__TYPEOF__) \
+ || (0x5110 <= __SUNPRO_C && !__STDC__))
+# define _GL_HAVE___TYPEOF__ 1
+#else
+# define _GL_HAVE___TYPEOF__ 0
+#endif
+
+/* Return 1 if the integer type or expression T might be signed. Return 0
+ if it is definitely unsigned. T must not be a bit-field expression.
+ This macro does not evaluate its argument, and expands to an
+ integer constant expression. */
+#if _GL_HAVE___TYPEOF__
+# define _GL_SIGNED_TYPE_OR_EXPR(t) _GL_TYPE_SIGNED (__typeof__ (t))
+#else
+# define _GL_SIGNED_TYPE_OR_EXPR(t) 1
+#endif
+
+/* Return 1 if - A would overflow in [MIN,MAX] arithmetic.
+ A should not have side effects, and A's type should be an
+ integer with minimum value MIN and maximum MAX. */
+#define _GL_INT_NEGATE_RANGE_OVERFLOW(a, min, max) \
+ ((min) < 0 ? (a) < - (max) : 0 < (a))
+
+/* True if __builtin_add_overflow (A, B, P) and __builtin_sub_overflow
+ (A, B, P) work when P is non-null. */
+#ifdef __EDG__
+/* EDG-based compilers like nvc 22.1 cannot add 64-bit signed to unsigned
+ <https://bugs.gnu.org/53256>. */
+# define _GL_HAS_BUILTIN_ADD_OVERFLOW 0
+#elif defined __has_builtin
+# define _GL_HAS_BUILTIN_ADD_OVERFLOW __has_builtin (__builtin_add_overflow)
+/* __builtin_{add,sub}_overflow exists but is not reliable in GCC 5.x and 6.x,
+ see <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269>. */
+#elif 7 <= __GNUC__
+# define _GL_HAS_BUILTIN_ADD_OVERFLOW 1
+#else
+# define _GL_HAS_BUILTIN_ADD_OVERFLOW 0
+#endif
+
+/* True if __builtin_mul_overflow (A, B, P) works when P is non-null. */
+#if defined __clang_major__ && __clang_major__ < 14
+/* Work around Clang bug <https://bugs.llvm.org/show_bug.cgi?id=16404>. */
+# define _GL_HAS_BUILTIN_MUL_OVERFLOW 0
+#else
+# define _GL_HAS_BUILTIN_MUL_OVERFLOW _GL_HAS_BUILTIN_ADD_OVERFLOW
+#endif
+
+/* True if __builtin_add_overflow_p (A, B, C) works, and similarly for
+ __builtin_sub_overflow_p and __builtin_mul_overflow_p. */
+#ifdef __EDG__
+/* In EDG-based compilers like ICC 2021.3 and earlier,
+ __builtin_add_overflow_p etc. are not treated as integral constant
+ expressions even when all arguments are. */
+# define _GL_HAS_BUILTIN_OVERFLOW_P 0
+#elif defined __has_builtin
+# define _GL_HAS_BUILTIN_OVERFLOW_P __has_builtin (__builtin_mul_overflow_p)
+#else
+# define _GL_HAS_BUILTIN_OVERFLOW_P (7 <= __GNUC__)
+#endif
+
+#if (!defined _GL_STDCKDINT_H && 202311 <= __STDC_VERSION__ \
+ && ! (_GL_HAS_BUILTIN_ADD_OVERFLOW && _GL_HAS_BUILTIN_MUL_OVERFLOW))
+# include <stdckdint.h>
+#endif
+
+/* Store the low-order bits of A + B, A - B, A * B, respectively, into *R.
+ Return 1 if the result overflows. Arguments should not have side
+ effects and A, B and *R can be of any integer type other than char,
+ bool, a bit-precise integer type, or an enumeration type. */
+#if _GL_HAS_BUILTIN_ADD_OVERFLOW
+# define _GL_INT_ADD_WRAPV(a, b, r) __builtin_add_overflow (a, b, r)
+# define _GL_INT_SUBTRACT_WRAPV(a, b, r) __builtin_sub_overflow (a, b, r)
+#elif defined ckd_add && defined ckd_sub && !defined _GL_STDCKDINT_H
+# define _GL_INT_ADD_WRAPV(a, b, r) ckd_add (r, + (a), + (b))
+# define _GL_INT_SUBTRACT_WRAPV(a, b, r) ckd_sub (r, + (a), + (b))
+#else
+# define _GL_INT_ADD_WRAPV(a, b, r) \
+ _GL_INT_OP_WRAPV (a, b, r, +, _GL_INT_ADD_RANGE_OVERFLOW)
+# define _GL_INT_SUBTRACT_WRAPV(a, b, r) \
+ _GL_INT_OP_WRAPV (a, b, r, -, _GL_INT_SUBTRACT_RANGE_OVERFLOW)
+#endif
+#if _GL_HAS_BUILTIN_MUL_OVERFLOW
+# if ((9 < __GNUC__ + (3 <= __GNUC_MINOR__) \
+ || (__GNUC__ == 8 && 4 <= __GNUC_MINOR__)) \
+ && !defined __EDG__)
+# define _GL_INT_MULTIPLY_WRAPV(a, b, r) __builtin_mul_overflow (a, b, r)
+# else
+ /* Work around GCC bug 91450. */
+# define _GL_INT_MULTIPLY_WRAPV(a, b, r) \
+ ((!_GL_SIGNED_TYPE_OR_EXPR (*(r)) && _GL_EXPR_SIGNED (a) && _GL_EXPR_SIGNED (b) \
+ && _GL_INT_MULTIPLY_RANGE_OVERFLOW (a, b, 0, (__typeof__ (*(r))) -1)) \
+ ? ((void) __builtin_mul_overflow (a, b, r), 1) \
+ : __builtin_mul_overflow (a, b, r))
+# endif
+#elif defined ckd_mul && !defined _GL_STDCKDINT_H
+# define _GL_INT_MULTIPLY_WRAPV(a, b, r) ckd_mul (r, + (a), + (b))
+#else
+# define _GL_INT_MULTIPLY_WRAPV(a, b, r) \
+ _GL_INT_OP_WRAPV (a, b, r, *, _GL_INT_MULTIPLY_RANGE_OVERFLOW)
+#endif
+
+/* Nonzero if this compiler has GCC bug 68193 or Clang bug 25390. See:
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68193
+ https://llvm.org/bugs/show_bug.cgi?id=25390
+ For now, assume all versions of GCC-like compilers generate bogus
+ warnings for _Generic. This matters only for compilers that
+ lack relevant builtins. */
+#if __GNUC__ || defined __clang__
+# define _GL__GENERIC_BOGUS 1
+#else
+# define _GL__GENERIC_BOGUS 0
+#endif
+
+/* Store the low-order bits of A <op> B into *R, where OP specifies
+ the operation and OVERFLOW the overflow predicate. Return 1 if the
+ result overflows. Arguments should not have side effects,
+ and A, B and *R can be of any integer type other than char, bool, a
+ bit-precise integer type, or an enumeration type. */
+#if 201112 <= __STDC_VERSION__ && !_GL__GENERIC_BOGUS
+# define _GL_INT_OP_WRAPV(a, b, r, op, overflow) \
+ (_Generic \
+ (*(r), \
+ signed char: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ signed char, SCHAR_MIN, SCHAR_MAX), \
+ unsigned char: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ unsigned char, 0, UCHAR_MAX), \
+ short int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ short int, SHRT_MIN, SHRT_MAX), \
+ unsigned short int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ unsigned short int, 0, USHRT_MAX), \
+ int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ int, INT_MIN, INT_MAX), \
+ unsigned int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ unsigned int, 0, UINT_MAX), \
+ long int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ long int, LONG_MIN, LONG_MAX), \
+ unsigned long int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ unsigned long int, 0, ULONG_MAX), \
+ long long int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
+ long long int, LLONG_MIN, LLONG_MAX), \
+ unsigned long long int: \
+ _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
+ unsigned long long int, 0, ULLONG_MAX)))
+#else
+/* Store the low-order bits of A <op> B into *R, where OP specifies
+ the operation and OVERFLOW the overflow predicate. If *R is
+ signed, its type is ST with bounds SMIN..SMAX; otherwise its type
+ is UT with bounds U..UMAX. ST and UT are narrower than int.
+ Return 1 if the result overflows. Arguments should not have side
+ effects, and A, B and *R can be of any integer type other than
+ char, bool, a bit-precise integer type, or an enumeration type. */
+# if _GL_HAVE___TYPEOF__
+# define _GL_INT_OP_WRAPV_SMALLISH(a,b,r,op,overflow,st,smin,smax,ut,umax) \
+ (_GL_TYPE_SIGNED (__typeof__ (*(r))) \
+ ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, st, smin, smax) \
+ : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, ut, 0, umax))
+# else
+# define _GL_INT_OP_WRAPV_SMALLISH(a,b,r,op,overflow,st,smin,smax,ut,umax) \
+ (overflow (a, b, smin, smax) \
+ ? (overflow (a, b, 0, umax) \
+ ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st), 1) \
+ : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st)) < 0) \
+ : (overflow (a, b, 0, umax) \
+ ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st)) >= 0 \
+ : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st), 0)))
+# endif
+
+# define _GL_INT_OP_WRAPV(a, b, r, op, overflow) \
+ (sizeof *(r) == sizeof (signed char) \
+ ? _GL_INT_OP_WRAPV_SMALLISH (a, b, r, op, overflow, \
+ signed char, SCHAR_MIN, SCHAR_MAX, \
+ unsigned char, UCHAR_MAX) \
+ : sizeof *(r) == sizeof (short int) \
+ ? _GL_INT_OP_WRAPV_SMALLISH (a, b, r, op, overflow, \
+ short int, SHRT_MIN, SHRT_MAX, \
+ unsigned short int, USHRT_MAX) \
+ : sizeof *(r) == sizeof (int) \
+ ? (_GL_EXPR_SIGNED (*(r)) \
+ ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ int, INT_MIN, INT_MAX) \
+ : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
+ unsigned int, 0, UINT_MAX)) \
+ : _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow))
+# ifdef LLONG_MAX
+# define _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow) \
+ (sizeof *(r) == sizeof (long int) \
+ ? (_GL_EXPR_SIGNED (*(r)) \
+ ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ long int, LONG_MIN, LONG_MAX) \
+ : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ unsigned long int, 0, ULONG_MAX)) \
+ : (_GL_EXPR_SIGNED (*(r)) \
+ ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
+ long long int, LLONG_MIN, LLONG_MAX) \
+ : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
+ unsigned long long int, 0, ULLONG_MAX)))
+# else
+# define _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow) \
+ (_GL_EXPR_SIGNED (*(r)) \
+ ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ long int, LONG_MIN, LONG_MAX) \
+ : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
+ unsigned long int, 0, ULONG_MAX))
+# endif
+#endif
+
+/* Store the low-order bits of A <op> B into *R, where the operation
+ is given by OP. Use the unsigned type UT for calculation to avoid
+ overflow problems. *R's type is T, with extrema TMIN and TMAX.
+ T can be any signed integer type other than char, bool, a
+ bit-precise integer type, or an enumeration type.
+ Return 1 if the result overflows. */
+#define _GL_INT_OP_CALC(a, b, r, op, overflow, ut, t, tmin, tmax) \
+ (overflow (a, b, tmin, tmax) \
+ ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a, b, op, ut, t), 1) \
+ : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a, b, op, ut, t), 0))
+
+/* Return 1 if the integer expressions A - B and -A would overflow,
+ respectively. Arguments should not have side effects,
+ and can be any signed integer type other than char, bool, a
+ bit-precise integer type, or an enumeration type.
+ These macros are tuned for their last input argument being a constant. */
+
+#if _GL_HAS_BUILTIN_OVERFLOW_P
+# define _GL_INT_NEGATE_OVERFLOW(a) \
+ __builtin_sub_overflow_p (0, a, (__typeof__ (- (a))) 0)
+#else
+# define _GL_INT_NEGATE_OVERFLOW(a) \
+ _GL_INT_NEGATE_RANGE_OVERFLOW (a, _GL_INT_MINIMUM (a), _GL_INT_MAXIMUM (a))
+#endif
+
+/* Return the low-order bits of A <op> B, where the operation is given
+ by OP. Use the unsigned type UT for calculation to avoid undefined
+ behavior on signed integer overflow, and convert the result to type T.
+ UT is at least as wide as T and is no narrower than unsigned int,
+ T is two's complement, and there is no padding or trap representations.
+ Assume that converting UT to T yields the low-order bits, as is
+ done in all known two's-complement C compilers. E.g., see:
+ https://gcc.gnu.org/onlinedocs/gcc/Integers-implementation.html
+
+ According to the C standard, converting UT to T yields an
+ implementation-defined result or signal for values outside T's
+ range. However, code that works around this theoretical problem
+ runs afoul of a compiler bug in Oracle Studio 12.3 x86. See:
+ https://lists.gnu.org/r/bug-gnulib/2017-04/msg00049.html
+ As the compiler bug is real, don't try to work around the
+ theoretical problem. */
+
+#define _GL_INT_OP_WRAPV_VIA_UNSIGNED(a, b, op, ut, t) \
+ ((t) ((ut) (a) op (ut) (b)))
+
+/* Return true if the numeric values A + B, A - B, A * B fall outside
+ the range TMIN..TMAX. Arguments should not have side effects
+ and can be any integer type other than char, bool,
+ a bit-precise integer type, or an enumeration type.
+ TMIN should be signed and nonpositive.
+ TMAX should be positive, and should be signed unless TMIN is zero. */
+#define _GL_INT_ADD_RANGE_OVERFLOW(a, b, tmin, tmax) \
+ ((b) < 0 \
+ ? (((tmin) \
+ ? ((_GL_EXPR_SIGNED (_GL_INT_CONVERT (a, (tmin) - (b))) || (b) < (tmin)) \
+ && (a) < (tmin) - (b)) \
+ : (a) <= -1 - (b)) \
+ || ((_GL_EXPR_SIGNED (a) ? 0 <= (a) : (tmax) < (a)) && (tmax) < (a) + (b))) \
+ : (a) < 0 \
+ ? (((tmin) \
+ ? ((_GL_EXPR_SIGNED (_GL_INT_CONVERT (b, (tmin) - (a))) || (a) < (tmin)) \
+ && (b) < (tmin) - (a)) \
+ : (b) <= -1 - (a)) \
+ || ((_GL_EXPR_SIGNED (_GL_INT_CONVERT (a, b)) || (tmax) < (b)) \
+ && (tmax) < (a) + (b))) \
+ : (tmax) < (b) || (tmax) - (b) < (a))
+#define _GL_INT_SUBTRACT_RANGE_OVERFLOW(a, b, tmin, tmax) \
+ (((a) < 0) == ((b) < 0) \
+ ? ((a) < (b) \
+ ? !(tmin) || -1 - (tmin) < (b) - (a) - 1 \
+ : (tmax) < (a) - (b)) \
+ : (a) < 0 \
+ ? ((!_GL_EXPR_SIGNED (_GL_INT_CONVERT ((a) - (tmin), b)) && (a) - (tmin) < 0) \
+ || (a) - (tmin) < (b)) \
+ : ((! (_GL_EXPR_SIGNED (_GL_INT_CONVERT (tmax, b)) \
+ && _GL_EXPR_SIGNED (_GL_INT_CONVERT ((tmax) + (b), a))) \
+ && (tmax) <= -1 - (b)) \
+ || (tmax) + (b) < (a)))
+#define _GL_INT_MULTIPLY_RANGE_OVERFLOW(a, b, tmin, tmax) \
+ ((b) < 0 \
+ ? ((a) < 0 \
+ ? (_GL_EXPR_SIGNED (_GL_INT_CONVERT (tmax, b)) \
+ ? (a) < (tmax) / (b) \
+ : ((_GL_INT_NEGATE_OVERFLOW (b) \
+ ? _GL_INT_CONVERT (b, tmax) >> (_GL_TYPE_WIDTH (+ (b)) - 1) \
+ : (tmax) / -(b)) \
+ <= -1 - (a))) \
+ : _GL_INT_NEGATE_OVERFLOW (_GL_INT_CONVERT (b, tmin)) && (b) == -1 \
+ ? (_GL_EXPR_SIGNED (a) \
+ ? 0 < (a) + (tmin) \
+ : 0 < (a) && -1 - (tmin) < (a) - 1) \
+ : (tmin) / (b) < (a)) \
+ : (b) == 0 \
+ ? 0 \
+ : ((a) < 0 \
+ ? (_GL_INT_NEGATE_OVERFLOW (_GL_INT_CONVERT (a, tmin)) && (a) == -1 \
+ ? (_GL_EXPR_SIGNED (b) ? 0 < (b) + (tmin) : -1 - (tmin) < (b) - 1) \
+ : (tmin) / (a) < (b)) \
+ : (tmax) / (b) < (a)))
+
+#endif /* _GL_INTPROPS_INTERNAL_H */
You should have received a copy of the GNU Lesser General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>. */
-
#ifndef _GL_INTPROPS_H
#define _GL_INTPROPS_H
-#include <limits.h>
-
-/* Return a value with the common real type of E and V and the value of V.
- Do not evaluate E. */
-#define _GL_INT_CONVERT(e, v) ((1 ? 0 : (e)) + (v))
-
-/* Act like _GL_INT_CONVERT (E, -V) but work around a bug in IRIX 6.5 cc; see
- <https://lists.gnu.org/r/bug-gnulib/2011-05/msg00406.html>. */
-#define _GL_INT_NEGATE_CONVERT(e, v) ((1 ? 0 : (e)) - (v))
+#include "intprops-internal.h"
/* The extra casts in the following macros work around compiler bugs,
e.g., in Cray C 5.0.3.0. */
#define TYPE_IS_INTEGER(t) ((t) 1.5 == 1)
/* True if the real type T is signed. */
-#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
+#define TYPE_SIGNED(t) _GL_TYPE_SIGNED (t)
/* Return 1 if the real expression E, after promotion, has a
signed or floating type. Do not evaluate E. */
-#define EXPR_SIGNED(e) (_GL_INT_NEGATE_CONVERT (e, 1) < 0)
+#define EXPR_SIGNED(e) _GL_EXPR_SIGNED (e)
/* Minimum and maximum values for integer types and expressions. */
/* The width in bits of the integer type or expression T.
Do not evaluate T. T must not be a bit-field expression.
Padding bits are not supported; this is checked at compile-time below. */
-#define TYPE_WIDTH(t) (sizeof (t) * CHAR_BIT)
+#define TYPE_WIDTH(t) _GL_TYPE_WIDTH (t)
/* The maximum and minimum values for the integer type T. */
#define TYPE_MINIMUM(t) ((t) ~ TYPE_MAXIMUM (t))
? (t) -1 \
: ((((t) 1 << (TYPE_WIDTH (t) - 2)) - 1) * 2 + 1)))
-/* The maximum and minimum values for the type of the expression E,
- after integer promotion. E is not evaluated. */
-#define _GL_INT_MINIMUM(e) \
- (EXPR_SIGNED (e) \
- ? ~ _GL_SIGNED_INT_MAXIMUM (e) \
- : _GL_INT_CONVERT (e, 0))
-#define _GL_INT_MAXIMUM(e) \
- (EXPR_SIGNED (e) \
- ? _GL_SIGNED_INT_MAXIMUM (e) \
- : _GL_INT_NEGATE_CONVERT (e, 1))
-#define _GL_SIGNED_INT_MAXIMUM(e) \
- (((_GL_INT_CONVERT (e, 1) << (TYPE_WIDTH (+ (e)) - 2)) - 1) * 2 + 1)
-
-/* Work around OpenVMS incompatibility with C99. */
-#if !defined LLONG_MAX && defined __INT64_MAX
-# define LLONG_MAX __INT64_MAX
-# define LLONG_MIN __INT64_MIN
-#endif
-
-/* This include file assumes that signed types are two's complement without
- padding bits; the above macros have undefined behavior otherwise.
- If this is a problem for you, please let us know how to fix it for your host.
- This assumption is tested by the intprops-tests module. */
-
-/* Does the __typeof__ keyword work? This could be done by
- 'configure', but for now it's easier to do it by hand. */
-#if (2 <= __GNUC__ \
- || (4 <= __clang_major__) \
- || (1210 <= __IBMC__ && defined __IBM__TYPEOF__) \
- || (0x5110 <= __SUNPRO_C && !__STDC__))
-# define _GL_HAVE___TYPEOF__ 1
-#else
-# define _GL_HAVE___TYPEOF__ 0
-#endif
-
-/* Return 1 if the integer type or expression T might be signed. Return 0
- if it is definitely unsigned. T must not be a bit-field expression.
- This macro does not evaluate its argument, and expands to an
- integer constant expression. */
-#if _GL_HAVE___TYPEOF__
-# define _GL_SIGNED_TYPE_OR_EXPR(t) TYPE_SIGNED (__typeof__ (t))
-#else
-# define _GL_SIGNED_TYPE_OR_EXPR(t) 1
-#endif
-
/* Bound on length of the string representing an unsigned integer
value representable in B bits. log10 (2.0) < 146/485. The
smallest value of B where this bound is not tight is 2621. */
/* Range overflow checks.
The INT_<op>_RANGE_OVERFLOW macros return 1 if the corresponding C
- operators might not yield numerically correct answers due to
- arithmetic overflow. They do not rely on undefined or
- implementation-defined behavior. Their implementations are simple
- and straightforward, but they are harder to use and may be less
- efficient than the INT_<op>_WRAPV, INT_<op>_OK, and
- INT_<op>_OVERFLOW macros described below.
+ operators overflow arithmetically when given the same arguments.
+ These macros do not rely on undefined or implementation-defined behavior.
+ Although their implementations are simple and straightforward,
+ they are harder to use and may be less efficient than the
+ INT_<op>_WRAPV, INT_<op>_OK, and INT_<op>_OVERFLOW macros described below.
Example usage:
/* Return 1 if - A would overflow in [MIN,MAX] arithmetic.
See above for restrictions. */
#define INT_NEGATE_RANGE_OVERFLOW(a, min, max) \
- ((min) < 0 \
- ? (a) < - (max) \
- : 0 < (a))
+ _GL_INT_NEGATE_RANGE_OVERFLOW (a, min, max)
/* Return 1 if A * B would overflow in [MIN,MAX] arithmetic.
See above for restrictions. Avoid && and || as they tickle
? (a) < (min) >> (b) \
: (max) >> (b) < (a))
-/* True if __builtin_add_overflow (A, B, P) and __builtin_sub_overflow
- (A, B, P) work when P is non-null. */
-#ifdef __EDG__
-/* EDG-based compilers like nvc 22.1 cannot add 64-bit signed to unsigned
- <https://bugs.gnu.org/53256>. */
-# define _GL_HAS_BUILTIN_ADD_OVERFLOW 0
-#elif defined __has_builtin
-# define _GL_HAS_BUILTIN_ADD_OVERFLOW __has_builtin (__builtin_add_overflow)
-/* __builtin_{add,sub}_overflow exists but is not reliable in GCC 5.x and 6.x,
- see <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269>. */
-#elif 7 <= __GNUC__
-# define _GL_HAS_BUILTIN_ADD_OVERFLOW 1
-#else
-# define _GL_HAS_BUILTIN_ADD_OVERFLOW 0
-#endif
-
-/* True if __builtin_mul_overflow (A, B, P) works when P is non-null. */
-#if defined __clang_major__ && __clang_major__ < 14
-/* Work around Clang bug <https://bugs.llvm.org/show_bug.cgi?id=16404>. */
-# define _GL_HAS_BUILTIN_MUL_OVERFLOW 0
-#else
-# define _GL_HAS_BUILTIN_MUL_OVERFLOW _GL_HAS_BUILTIN_ADD_OVERFLOW
-#endif
-
-/* True if __builtin_add_overflow_p (A, B, C) works, and similarly for
- __builtin_sub_overflow_p and __builtin_mul_overflow_p. */
-#ifdef __EDG__
-/* In EDG-based compilers like ICC 2021.3 and earlier,
- __builtin_add_overflow_p etc. are not treated as integral constant
- expressions even when all arguments are. */
-# define _GL_HAS_BUILTIN_OVERFLOW_P 0
-#elif defined __has_builtin
-# define _GL_HAS_BUILTIN_OVERFLOW_P __has_builtin (__builtin_mul_overflow_p)
-#else
-# define _GL_HAS_BUILTIN_OVERFLOW_P (7 <= __GNUC__)
-#endif
-
/* The _GL*_OVERFLOW macros have the same restrictions as the
*_RANGE_OVERFLOW macros, except that they do not assume that operands
(e.g., A and B) have the same type as MIN and MAX. Instead, they assume
Because the WRAPV macros convert the result, they report overflow
in different circumstances than the OVERFLOW macros do. For
example, in the typical case with 16-bit 'short' and 32-bit 'int',
- if A, B and R are all of type 'short' then INT_ADD_OVERFLOW (A, B)
+ if A, B and *R are all of type 'short' then INT_ADD_OVERFLOW (A, B)
returns false because the addition cannot overflow after A and B
- are converted to 'int', whereas INT_ADD_WRAPV (A, B, &R) returns
+ are converted to 'int', whereas INT_ADD_WRAPV (A, B, R) returns
true or false depending on whether the sum fits into 'short'.
These macros are tuned for their last input argument being a constant.
+ A, B, and *R should be integers; they need not be the same type,
+ and they need not be all signed or all unsigned.
+ However, none of the integer types should be bit-precise,
+ and *R's type should not be char, bool, or an enumeration type.
+
Return 1 if the integer expressions A * B, A - B, -A, A * B, A / B,
A % B, and A << B would overflow, respectively. */
_GL_BINARY_OP_OVERFLOW (a, b, _GL_ADD_OVERFLOW)
#define INT_SUBTRACT_OVERFLOW(a, b) \
_GL_BINARY_OP_OVERFLOW (a, b, _GL_SUBTRACT_OVERFLOW)
-#if _GL_HAS_BUILTIN_OVERFLOW_P
-# define INT_NEGATE_OVERFLOW(a) INT_SUBTRACT_OVERFLOW (0, a)
-#else
-# define INT_NEGATE_OVERFLOW(a) \
- INT_NEGATE_RANGE_OVERFLOW (a, _GL_INT_MINIMUM (a), _GL_INT_MAXIMUM (a))
-#endif
+#define INT_NEGATE_OVERFLOW(a) _GL_INT_NEGATE_OVERFLOW (a)
#define INT_MULTIPLY_OVERFLOW(a, b) \
_GL_BINARY_OP_OVERFLOW (a, b, _GL_MULTIPLY_OVERFLOW)
#define INT_DIVIDE_OVERFLOW(a, b) \
/* Store the low-order bits of A + B, A - B, A * B, respectively, into *R.
Return 1 if the result overflows. See above for restrictions. */
-#if _GL_HAS_BUILTIN_ADD_OVERFLOW
-# define INT_ADD_WRAPV(a, b, r) __builtin_add_overflow (a, b, r)
-# define INT_SUBTRACT_WRAPV(a, b, r) __builtin_sub_overflow (a, b, r)
-#else
-# define INT_ADD_WRAPV(a, b, r) \
- _GL_INT_OP_WRAPV (a, b, r, +, _GL_INT_ADD_RANGE_OVERFLOW)
-# define INT_SUBTRACT_WRAPV(a, b, r) \
- _GL_INT_OP_WRAPV (a, b, r, -, _GL_INT_SUBTRACT_RANGE_OVERFLOW)
-#endif
-#if _GL_HAS_BUILTIN_MUL_OVERFLOW
-# if ((9 < __GNUC__ + (3 <= __GNUC_MINOR__) \
- || (__GNUC__ == 8 && 4 <= __GNUC_MINOR__)) \
- && !defined __EDG__)
-# define INT_MULTIPLY_WRAPV(a, b, r) __builtin_mul_overflow (a, b, r)
-# else
- /* Work around GCC bug 91450. */
-# define INT_MULTIPLY_WRAPV(a, b, r) \
- ((!_GL_SIGNED_TYPE_OR_EXPR (*(r)) && EXPR_SIGNED (a) && EXPR_SIGNED (b) \
- && _GL_INT_MULTIPLY_RANGE_OVERFLOW (a, b, 0, (__typeof__ (*(r))) -1)) \
- ? ((void) __builtin_mul_overflow (a, b, r), 1) \
- : __builtin_mul_overflow (a, b, r))
-# endif
-#else
-# define INT_MULTIPLY_WRAPV(a, b, r) \
- _GL_INT_OP_WRAPV (a, b, r, *, _GL_INT_MULTIPLY_RANGE_OVERFLOW)
-#endif
-
-/* Nonzero if this compiler has GCC bug 68193 or Clang bug 25390. See:
- https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68193
- https://llvm.org/bugs/show_bug.cgi?id=25390
- For now, assume all versions of GCC-like compilers generate bogus
- warnings for _Generic. This matters only for compilers that
- lack relevant builtins. */
-#if __GNUC__ || defined __clang__
-# define _GL__GENERIC_BOGUS 1
-#else
-# define _GL__GENERIC_BOGUS 0
-#endif
-
-/* Store the low-order bits of A <op> B into *R, where OP specifies
- the operation and OVERFLOW the overflow predicate. Return 1 if the
- result overflows. See above for restrictions. */
-#if 201112 <= __STDC_VERSION__ && !_GL__GENERIC_BOGUS
-# define _GL_INT_OP_WRAPV(a, b, r, op, overflow) \
- (_Generic \
- (*(r), \
- signed char: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- signed char, SCHAR_MIN, SCHAR_MAX), \
- unsigned char: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- unsigned char, 0, UCHAR_MAX), \
- short int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- short int, SHRT_MIN, SHRT_MAX), \
- unsigned short int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- unsigned short int, 0, USHRT_MAX), \
- int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- int, INT_MIN, INT_MAX), \
- unsigned int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- unsigned int, 0, UINT_MAX), \
- long int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- long int, LONG_MIN, LONG_MAX), \
- unsigned long int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- unsigned long int, 0, ULONG_MAX), \
- long long int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
- long long int, LLONG_MIN, LLONG_MAX), \
- unsigned long long int: \
- _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
- unsigned long long int, 0, ULLONG_MAX)))
-#else
-/* Store the low-order bits of A <op> B into *R, where OP specifies
- the operation and OVERFLOW the overflow predicate. If *R is
- signed, its type is ST with bounds SMIN..SMAX; otherwise its type
- is UT with bounds U..UMAX. ST and UT are narrower than int.
- Return 1 if the result overflows. See above for restrictions. */
-# if _GL_HAVE___TYPEOF__
-# define _GL_INT_OP_WRAPV_SMALLISH(a,b,r,op,overflow,st,smin,smax,ut,umax) \
- (TYPE_SIGNED (__typeof__ (*(r))) \
- ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, st, smin, smax) \
- : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, ut, 0, umax))
-# else
-# define _GL_INT_OP_WRAPV_SMALLISH(a,b,r,op,overflow,st,smin,smax,ut,umax) \
- (overflow (a, b, smin, smax) \
- ? (overflow (a, b, 0, umax) \
- ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st), 1) \
- : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st)) < 0) \
- : (overflow (a, b, 0, umax) \
- ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st)) >= 0 \
- : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a,b,op,unsigned,st), 0)))
-# endif
-
-# define _GL_INT_OP_WRAPV(a, b, r, op, overflow) \
- (sizeof *(r) == sizeof (signed char) \
- ? _GL_INT_OP_WRAPV_SMALLISH (a, b, r, op, overflow, \
- signed char, SCHAR_MIN, SCHAR_MAX, \
- unsigned char, UCHAR_MAX) \
- : sizeof *(r) == sizeof (short int) \
- ? _GL_INT_OP_WRAPV_SMALLISH (a, b, r, op, overflow, \
- short int, SHRT_MIN, SHRT_MAX, \
- unsigned short int, USHRT_MAX) \
- : sizeof *(r) == sizeof (int) \
- ? (EXPR_SIGNED (*(r)) \
- ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- int, INT_MIN, INT_MAX) \
- : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned int, \
- unsigned int, 0, UINT_MAX)) \
- : _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow))
-# ifdef LLONG_MAX
-# define _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow) \
- (sizeof *(r) == sizeof (long int) \
- ? (EXPR_SIGNED (*(r)) \
- ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- long int, LONG_MIN, LONG_MAX) \
- : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- unsigned long int, 0, ULONG_MAX)) \
- : (EXPR_SIGNED (*(r)) \
- ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
- long long int, LLONG_MIN, LLONG_MAX) \
- : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long long int, \
- unsigned long long int, 0, ULLONG_MAX)))
-# else
-# define _GL_INT_OP_WRAPV_LONGISH(a, b, r, op, overflow) \
- (EXPR_SIGNED (*(r)) \
- ? _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- long int, LONG_MIN, LONG_MAX) \
- : _GL_INT_OP_CALC (a, b, r, op, overflow, unsigned long int, \
- unsigned long int, 0, ULONG_MAX))
-# endif
-#endif
-
-/* Store the low-order bits of A <op> B into *R, where the operation
- is given by OP. Use the unsigned type UT for calculation to avoid
- overflow problems. *R's type is T, with extrema TMIN and TMAX.
- T must be a signed integer type. Return 1 if the result overflows. */
-#define _GL_INT_OP_CALC(a, b, r, op, overflow, ut, t, tmin, tmax) \
- (overflow (a, b, tmin, tmax) \
- ? (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a, b, op, ut, t), 1) \
- : (*(r) = _GL_INT_OP_WRAPV_VIA_UNSIGNED (a, b, op, ut, t), 0))
-
-/* Return the low-order bits of A <op> B, where the operation is given
- by OP. Use the unsigned type UT for calculation to avoid undefined
- behavior on signed integer overflow, and convert the result to type T.
- UT is at least as wide as T and is no narrower than unsigned int,
- T is two's complement, and there is no padding or trap representations.
- Assume that converting UT to T yields the low-order bits, as is
- done in all known two's-complement C compilers. E.g., see:
- https://gcc.gnu.org/onlinedocs/gcc/Integers-implementation.html
-
- According to the C standard, converting UT to T yields an
- implementation-defined result or signal for values outside T's
- range. However, code that works around this theoretical problem
- runs afoul of a compiler bug in Oracle Studio 12.3 x86. See:
- https://lists.gnu.org/r/bug-gnulib/2017-04/msg00049.html
- As the compiler bug is real, don't try to work around the
- theoretical problem. */
-
-#define _GL_INT_OP_WRAPV_VIA_UNSIGNED(a, b, op, ut, t) \
- ((t) ((ut) (a) op (ut) (b)))
-
-/* Return true if the numeric values A + B, A - B, A * B fall outside
- the range TMIN..TMAX. Arguments should be integer expressions
- without side effects. TMIN should be signed and nonpositive.
- TMAX should be positive, and should be signed unless TMIN is zero. */
-#define _GL_INT_ADD_RANGE_OVERFLOW(a, b, tmin, tmax) \
- ((b) < 0 \
- ? (((tmin) \
- ? ((EXPR_SIGNED (_GL_INT_CONVERT (a, (tmin) - (b))) || (b) < (tmin)) \
- && (a) < (tmin) - (b)) \
- : (a) <= -1 - (b)) \
- || ((EXPR_SIGNED (a) ? 0 <= (a) : (tmax) < (a)) && (tmax) < (a) + (b))) \
- : (a) < 0 \
- ? (((tmin) \
- ? ((EXPR_SIGNED (_GL_INT_CONVERT (b, (tmin) - (a))) || (a) < (tmin)) \
- && (b) < (tmin) - (a)) \
- : (b) <= -1 - (a)) \
- || ((EXPR_SIGNED (_GL_INT_CONVERT (a, b)) || (tmax) < (b)) \
- && (tmax) < (a) + (b))) \
- : (tmax) < (b) || (tmax) - (b) < (a))
-#define _GL_INT_SUBTRACT_RANGE_OVERFLOW(a, b, tmin, tmax) \
- (((a) < 0) == ((b) < 0) \
- ? ((a) < (b) \
- ? !(tmin) || -1 - (tmin) < (b) - (a) - 1 \
- : (tmax) < (a) - (b)) \
- : (a) < 0 \
- ? ((!EXPR_SIGNED (_GL_INT_CONVERT ((a) - (tmin), b)) && (a) - (tmin) < 0) \
- || (a) - (tmin) < (b)) \
- : ((! (EXPR_SIGNED (_GL_INT_CONVERT (tmax, b)) \
- && EXPR_SIGNED (_GL_INT_CONVERT ((tmax) + (b), a))) \
- && (tmax) <= -1 - (b)) \
- || (tmax) + (b) < (a)))
-#define _GL_INT_MULTIPLY_RANGE_OVERFLOW(a, b, tmin, tmax) \
- ((b) < 0 \
- ? ((a) < 0 \
- ? (EXPR_SIGNED (_GL_INT_CONVERT (tmax, b)) \
- ? (a) < (tmax) / (b) \
- : ((INT_NEGATE_OVERFLOW (b) \
- ? _GL_INT_CONVERT (b, tmax) >> (TYPE_WIDTH (+ (b)) - 1) \
- : (tmax) / -(b)) \
- <= -1 - (a))) \
- : INT_NEGATE_OVERFLOW (_GL_INT_CONVERT (b, tmin)) && (b) == -1 \
- ? (EXPR_SIGNED (a) \
- ? 0 < (a) + (tmin) \
- : 0 < (a) && -1 - (tmin) < (a) - 1) \
- : (tmin) / (b) < (a)) \
- : (b) == 0 \
- ? 0 \
- : ((a) < 0 \
- ? (INT_NEGATE_OVERFLOW (_GL_INT_CONVERT (a, tmin)) && (a) == -1 \
- ? (EXPR_SIGNED (b) ? 0 < (b) + (tmin) : -1 - (tmin) < (b) - 1) \
- : (tmin) / (a) < (b)) \
- : (tmax) / (b) < (a)))
+#define INT_ADD_WRAPV(a, b, r) _GL_INT_ADD_WRAPV (a, b, r)
+#define INT_SUBTRACT_WRAPV(a, b, r) _GL_INT_SUBTRACT_WRAPV (a, b, r)
+#define INT_MULTIPLY_WRAPV(a, b, r) _GL_INT_MULTIPLY_WRAPV (a, b, r)
/* The following macros compute A + B, A - B, and A * B, respectively.
If no overflow occurs, they set *R to the result and return 1;
A, B, and *R should be integers; they need not be the same type,
and they need not be all signed or all unsigned.
+ However, none of the integer types should be bit-precise,
+ and *R's type should not be char, bool, or an enumeration type.
These macros work correctly on all known practical hosts, and do not rely
on undefined behavior due to signed arithmetic overflow.
These macros are tuned for B being a constant. */
-#define INT_ADD_OK(a, b, r) ! INT_ADD_WRAPV (a, b, r)
-#define INT_SUBTRACT_OK(a, b, r) ! INT_SUBTRACT_WRAPV (a, b, r)
-#define INT_MULTIPLY_OK(a, b, r) ! INT_MULTIPLY_WRAPV (a, b, r)
+#define INT_ADD_OK(a, b, r) (! INT_ADD_WRAPV (a, b, r))
+#define INT_SUBTRACT_OK(a, b, r) (! INT_SUBTRACT_WRAPV (a, b, r))
+#define INT_MULTIPLY_OK(a, b, r) (! INT_MULTIPLY_WRAPV (a, b, r))
#endif /* _GL_INTPROPS_H */
--- /dev/null
+/* stdckdint.h -- checked integer arithmetic
+
+ Copyright 2022 Free Software Foundation, Inc.
+
+ This program is free software: you can redistribute it and/or modify it
+ under the terms of the GNU Lesser General Public License as published
+ by the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with this program. If not, see <https://www.gnu.org/licenses/>. */
+
+#ifndef _GL_STDCKDINT_H
+#define _GL_STDCKDINT_H
+
+#include "intprops-internal.h"
+
+#include <stdbool.h>
+
+/* Store into *R the low-order bits of A + B, A - B, A * B, respectively.
+ Return 1 if the result overflows, 0 otherwise.
+ A, B, and *R can have any integer type other than char, bool, a
+ bit-precise integer type, or an enumeration type.
+
+ These are like the standard macros introduced in C23, except that
+ arguments should not have side effects. */
+
+#define ckd_add(r, a, b) ((bool) _GL_INT_ADD_WRAPV (a, b, r))
+#define ckd_sub(r, a, b) ((bool) _GL_INT_SUBTRACT_WRAPV (a, b, r))
+#define ckd_mul(r, a, b) ((bool) _GL_INT_MULTIPLY_WRAPV (a, b, r))
+
+#endif /* _GL_STDCKDINT_H */
#define BASE_62_DIGITS 10 /* 62**10 < UINT_FAST64_MAX */
#define BASE_62_POWER (62LL * 62 * 62 * 62 * 62 * 62 * 62 * 62 * 62 * 62)
+#if _LIBC || (defined CLOCK_MONOTONIC && HAVE_CLOCK_GETTIME)
+# define HAS_CLOCK_ENTROPY true
+#else
+# define HAS_CLOCK_ENTROPY false
+#endif
+
static random_value
random_bits (random_value var, bool use_getrandom)
{
/* Without GRND_NONBLOCK it can be blocked for minutes on some systems. */
if (use_getrandom && __getrandom (&r, sizeof r, GRND_NONBLOCK) == sizeof r)
return r;
-#if _LIBC || (defined CLOCK_MONOTONIC && HAVE_CLOCK_GETTIME)
+#if HAS_CLOCK_ENTROPY
/* Add entropy if getrandom did not work. */
struct __timespec64 tv;
__clock_gettime64 (CLOCK_MONOTONIC, &tv);
and return a read-write fd. The file is mode 0600.
__GT_DIR: create a directory, which will be mode 0700.
- We use a clever algorithm to get hard-to-predict names. */
+ */
#ifdef _LIBC
static
#endif
alignment. */
random_value v = ((uintptr_t) &v) / alignof (max_align_t);
+#if !HAS_CLOCK_ENTROPY
+ /* Arrange gen_tempname to return less predictable file names on
+ systems lacking clock entropy <https://bugs.gnu.org/57129>. */
+ static random_value prev_v;
+ v ^= prev_v;
+#endif
+
/* How many random base-62 digits can currently be extracted from V. */
int vdigits = 0;
/* Whether to consume entropy when acquiring random bits. On the
first try it's worth the entropy cost with __GT_NOCREATE, which
is inherently insecure and can use the entropy to make it a bit
- less secure. On the (rare) second and later attempts it might
+ more secure. On the (rare) second and later attempts it might
help against DoS attacks. */
bool use_getrandom = tryfunc == try_nocreate;
if (fd >= 0)
{
__set_errno (save_errno);
+#if !HAS_CLOCK_ENTROPY
+ prev_v = v;
+#endif
return fd;
}
else if (errno != EEXIST)
and return a read-write fd. The file is mode 0600.
GT_DIR: create a directory, which will be mode 0700.
- We use a clever algorithm to get hard-to-predict names. */
+ */
extern int gen_tempname (char *tmpl, int suffixlen, int flags, int kind);
/* Similar, except X_SUFFIX_LEN gives the number of Xs. */
extern int gen_tempname_len (char *tmpl, int suffixlen, int flags, int kind,
# define assume(R) ((R) ? (void) 0 : __builtin_unreachable ())
#elif 1200 <= _MSC_VER
# define assume(R) __assume (R)
+#elif 202311L <= __STDC_VERSION__
+# include <stddef.h>
+# define assume(R) ((R) ? (void) 0 : unreachable ())
#elif (defined GCC_LINT || defined lint) && _GL_HAS_BUILTIN_TRAP
/* Doing it this way helps various packages when configured with
--enable-gcc-warnings, which compiles with -Dlint. It's nicer
- when 'assume' silences warnings even with older GCCs. */
+ if 'assume' silences warnings with GCC 3.4 through GCC 4.4.7 (2012). */
# define assume(R) ((R) ? (void) 0 : __builtin_trap ())
#else
- /* Some tools grok NOTREACHED, e.g., Oracle Studio 12.6. */
+ /* Some older tools grok NOTREACHED, e.g., Oracle Studio 12.6 (2017). */
# define assume(R) ((R) ? (void) 0 : /*NOTREACHED*/ (void) 0)
#endif
# Code from module stat-time:
# Code from module std-gnu11:
# Code from module stdalign:
+ # Code from module stdckdint:
# Code from module stddef:
# Code from module stdint:
# Code from module stdio:
gl_gnulib_enabled_61bcaca76b3e6f9ae55d57a1c3193bc4=false
gl_gnulib_enabled_6099e9737f757db36c47fa9d9f02e88c=false
gl_gnulib_enabled_scratch_buffer=false
+ gl_gnulib_enabled_stdckdint=false
gl_gnulib_enabled_strtoll=false
gl_gnulib_enabled_utimens=false
gl_gnulib_enabled_682e609604ccaac6be382e4ee3a4eaec=false
if test $HAVE_GROUP_MEMBER = 0; then
func_gl_gnulib_m4code_d3b2383720ee0e541357aa2aac598e2b
fi
+ if test $HAVE_GROUP_MEMBER = 0; then
+ func_gl_gnulib_m4code_stdckdint
+ fi
fi
}
func_gl_gnulib_m4code_lchmod ()
func_gl_gnulib_m4code_61bcaca76b3e6f9ae55d57a1c3193bc4
fi
}
+ func_gl_gnulib_m4code_stdckdint ()
+ {
+ if ! $gl_gnulib_enabled_stdckdint; then
+ AC_CHECK_HEADERS_ONCE([stdckdint.h])
+ if test $ac_cv_header_stdckdint_h = yes; then
+ GL_GENERATE_STDCKDINT_H=false
+ else
+ GL_GENERATE_STDCKDINT_H=true
+ fi
+ gl_CONDITIONAL_HEADER([stdckdint.h])
+ AC_PROG_MKDIR_P
+ gl_gnulib_enabled_stdckdint=true
+ fi
+ }
func_gl_gnulib_m4code_strtoll ()
{
if ! $gl_gnulib_enabled_strtoll; then
AM_CONDITIONAL([gl_GNULIB_ENABLED_61bcaca76b3e6f9ae55d57a1c3193bc4], [$gl_gnulib_enabled_61bcaca76b3e6f9ae55d57a1c3193bc4])
AM_CONDITIONAL([gl_GNULIB_ENABLED_6099e9737f757db36c47fa9d9f02e88c], [$gl_gnulib_enabled_6099e9737f757db36c47fa9d9f02e88c])
AM_CONDITIONAL([gl_GNULIB_ENABLED_scratch_buffer], [$gl_gnulib_enabled_scratch_buffer])
+ AM_CONDITIONAL([gl_GNULIB_ENABLED_stdckdint], [$gl_gnulib_enabled_stdckdint])
AM_CONDITIONAL([gl_GNULIB_ENABLED_strtoll], [$gl_gnulib_enabled_strtoll])
AM_CONDITIONAL([gl_GNULIB_ENABLED_utimens], [$gl_gnulib_enabled_utimens])
AM_CONDITIONAL([gl_GNULIB_ENABLED_682e609604ccaac6be382e4ee3a4eaec], [$gl_gnulib_enabled_682e609604ccaac6be382e4ee3a4eaec])
lib/idx.h
lib/ieee754.in.h
lib/ignore-value.h
+ lib/intprops-internal.h
lib/intprops.h
lib/inttypes.in.h
lib/lchmod.c
lib/stat-time.c
lib/stat-time.h
lib/stdalign.in.h
+ lib/stdckdint.in.h
lib/stddef.in.h
lib/stdint.in.h
lib/stdio-impl.h
# It does not set _LARGEFILE_SOURCE=1 on HP-UX/ia64 32-bit, although this
# setting of _LARGEFILE_SOURCE is needed so that <stdio.h> declares fseeko
# and ftello in C++ mode as well.
+# Fixed in Autoconf 2.72, which has AC_SYS_YEAR2038.
AC_DEFUN([gl_SET_LARGEFILE_SOURCE],
[
+ m4_ifndef([AC_SYS_YEAR2038], [
AC_REQUIRE([AC_CANONICAL_HOST])
AC_FUNC_FSEEKO
case "$host_os" in
[Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2).])
;;
esac
+ ])
])
-# Work around a problem in Autoconf through at least 2.71 on glibc 2.34+
+# Work around a problem in Autoconf through 2.71 on glibc 2.34+
# with _TIME_BITS. Also, work around a problem in autoconf <= 2.69:
# AC_SYS_LARGEFILE does not configure for large inodes on Mac OS X 10.5,
# or configures them incorrectly in some cases.
])
])# m4_version_prereq 2.70
+m4_ifndef([AC_SYS_YEAR2038], [
# _AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE,
# CACHE-VAR,
[64],
[gl_YEAR2038_BODY([])])])
])# AC_SYS_LARGEFILE
+])# m4_ifndef AC_SYS_YEAR2038
# Enable large files on systems where this is implemented by Gnulib, not by the
# system headers.
-# year2038.m4 serial 7
+# year2038.m4 serial 8
dnl Copyright (C) 2017-2022 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl Attempt to ensure that 'time_t' can go past the year 2038 and that
dnl the functions 'time', 'stat', etc. work with post-2038 timestamps.
+m4_ifdef([AC_SYS_YEAR2038], [
+ AC_DEFUN([gl_YEAR2038_EARLY])
+ AC_DEFUN([gl_YEAR2038], [AC_SYS_YEAR2038])
+ AC_DEFUN([gl_YEAR2038_BODY], [_AC_SYS_YEAR2038])
+], [
+
AC_DEFUN([gl_YEAR2038_EARLY],
[
AC_REQUIRE([AC_CANONICAL_HOST])
[
gl_YEAR2038_BODY([require-year2038-safe])
])
+
+]) # m4_ifndef AC_SYS_YEAR2038
projects / emacs.git / commitdiff