+2012-10-18 Stefan Monnier <monnier@iro.umontreal.ca>
+
+ * Makefile.in ($(MAKEFILE_NAME)): Depend on src/lisp.mk as well.
+
2012-10-15 Glenn Morris <rgm@gnu.org>
* Makefile.in (install-man, install-etc):
2012-10-08 Daniel Colascione <dancol@dancol.org>
- * configure.ac: Add --with-w32 as a window system option. Limit
- it to Cygwin for now. Integrate w32 into the refactored window
+ * configure.ac: Add --with-w32 as a window system option.
+ Limit it to Cygwin for now. Integrate w32 into the refactored window
system configuration and set TERM_HEADER to w32term.h when w32 is
configured.
2012-06-26 Eli Zaretskii <eliz@gnu.org>
- * lib/makefile.w32-in ($(GNULIBOBJS)): Depend on stamp_BLD. This
- replaces separate dependency for each object file, which required
+ * lib/makefile.w32-in ($(GNULIBOBJS)): Depend on stamp_BLD.
+ This replaces separate dependency for each object file, which required
the same object file to be mentioned twice, causing failures in
parallel builds.
The build procedure now creates <stdalign.h> and <sys/types.h> for
older hosts that lack a working <stdalign.h> or whose
- <sys/types.h> does not define pid_t, size_t, ssize_t, mode_t. New
- symbols such as WINDOWS_64_BIT_OFF_T may require attention in the
+ <sys/types.h> does not define pid_t, size_t, ssize_t, mode_t.
+ New symbols such as WINDOWS_64_BIT_OFF_T may require attention in the
msdos and nt builds.
Here is a precis of gnulib changes that seem relevant; please see
* .bzrignore: Ignore new lib/*.in-h files.
- * config.bat: Rename stdint.in.h and sys_stat.in.h. Call
- depfiles.bat even if lib/deps already exist.
+ * config.bat: Rename stdint.in.h and sys_stat.in.h.
+ Call depfiles.bat even if lib/deps already exist.
2011-02-25 Paul Eggert <eggert@cs.ucla.edu>
2011-02-21 Christoph Scholtes <cschol2112@gmail.com>
- * lib/makefile.w32-in ($(BLD)/md5.$(O)): Added dependency on
+ * lib/makefile.w32-in ($(BLD)/md5.$(O)): Add dependency on
$(EMACS_ROOT)/nt/inc/stdint.h.
2011-02-21 Eli Zaretskii <eliz@gnu.org>
2011-02-13 Bruno Haible <bruno@clisp.org>
Consistent macro naming for macros that use GCC __attribute__.
- * lib/ignore-value.h (_GL_ATTRIBUTE_DEPRECATED): Renamed from
+ * lib/ignore-value.h (_GL_ATTRIBUTE_DEPRECATED): Rename from
ATTRIBUTE_DEPRECATED.
2011-02-12 Bruno Haible <bruno@clisp.org>
2011-02-05 Paul Eggert <eggert@cs.ucla.edu>
sync from gnulib to remove HAVE_STDBOOL_H
- * m4/stdbool.m4 (AC_CHECK_HEADER_STDBOOL): Renamed from
+ * m4/stdbool.m4 (AC_CHECK_HEADER_STDBOOL): Rename from
AC_HEADER_STDBOOL. All uses changed. Do not define
HAVE_STDBOOL_H, as gnulib does not need this. This change is
imported from the latest Autoconf git. It was motivated by Emacs,
* lib/mktime.c (isdst_differ): New function.
(__mktime_internal): Use it systematically for all isdst comparisons.
This completes the fix for libc BZ #6723, and removes the need for
- normalizing tm_isdst. See
- <http://sourceware.org/bugzilla/show_bug.cgi?id=6723>
+ normalizing tm_isdst.
+ See <http://sourceware.org/bugzilla/show_bug.cgi?id=6723>
(not_equal_tm) [DEBUG]: Use isdst_differ here, too.
mktime: fix some integer overflow issues and sidestep the rest
2011-01-28 Paul Eggert <eggert@cs.ucla.edu>
improve fix for MS-DOS file name clash
- * Makefile.in (DOS_gnulib_comp.m4): Renamed from DOS-gnulib-comp.m4,
+ * Makefile.in (DOS_gnulib_comp.m4): Rename from DOS-gnulib-comp.m4,
for portability to POSIX make. Reported by Bruno Haible.
(sync-from-gnulib): Copy gl-comp.m4 (if present) back to
gnulib-comp.m4 before running gnulib-tool, to prevent old gnulib
2010-12-04 Andreas Schwab <schwab@linux-m68k.org>
* configure.in: Remove reference to removed machine description
- files and allow $machine and $machfile to be empty. Substitute
- M_FILE/S_FILE instead of machfile/opsysfile.
+ files and allow $machine and $machfile to be empty.
+ Substitute M_FILE/S_FILE instead of machfile/opsysfile.
2010-12-03 Glenn Morris <rgm@gnu.org>
2010-10-31 Ken Brown <kbrown@cornell.edu>
- * configure.in (checking whether localtime caches TZ): Use
- unsetenv instead of modifying environment directly.
+ * configure.in (checking whether localtime caches TZ):
+ Use unsetenv instead of modifying environment directly.
2010-10-25 Andreas Schwab <schwab@linux-m68k.org>
2010-10-12 Dan Nicolaescu <dann@ics.uci.edu>
- * configure (ns_appdir, OLDXMENU, TOOLTIP_SUPPORT): Remove
- trailing / from directory names.
+ * configure (ns_appdir, OLDXMENU, TOOLTIP_SUPPORT):
+ Remove trailing / from directory names.
2010-10-12 Glenn Morris <rgm@gnu.org>
2008-08-21 Christian Faulhammer <opfer@gentoo.org> (tiny change)
- * configure.in (GNUSTEP_SYSTEM_HEADERS): Define
- GNUSTEP_SYSTEM_HEADERS and GNUSTEP_SYSTEM_LIBRARIES.
+ * configure.in (GNUSTEP_SYSTEM_HEADERS):
+ Define GNUSTEP_SYSTEM_HEADERS and GNUSTEP_SYSTEM_LIBRARIES.
* configure: Regenerate.
2008-08-06 Adrian Robert <Adrian.B.Robert@gmail.com>
* configure.in (NS_HAVE_INTEGER): Rename to NS_HAVE_NSINTEGER.
- (C_SWITCH_X_SYSTEM): Drop -MMD -MP under NS_IMPL_GNUstep. Don't
- bother undef'ing since won't have desired effect.
+ (C_SWITCH_X_SYSTEM): Drop -MMD -MP under NS_IMPL_GNUstep.
+ Don't bother undef'ing since won't have desired effect.
2008-08-06 Andreas Schwab <schwab@suse.de>
2007-03-19 Deanna Phillips <deanna@sixbit.org> (tiny change)
* configure.in (arm-*-openbsd*, hppa-*-openbsd*)
- (m88k-*-openbsd*, mips64-*-openbsd*, sh-*-openbsd*): Added.
- (ns32k-*-openbsd*, ns32k-*-openbsd*): Deleted.
+ (m88k-*-openbsd*, mips64-*-openbsd*, sh-*-openbsd*): Add.
+ (ns32k-*-openbsd*, ns32k-*-openbsd*): Delete.
2007-03-19 Chong Yidong <cyd@stupidchicken.com>
* configure.in: Use GZIP_PROG instead of GZIP.
- * Makefile.in (GZIP_PROG): Renamed from GZIP.
+ * Makefile.in (GZIP_PROG): Rename from GZIP.
(install-arch-indep): Adjust.
2005-11-01 Andreas Schwab <schwab@suse.de>
2005-05-13 YAMAMOTO Mitsuharu <mituharu@math.s.chiba-u.ac.jp>
* configure.in: Don't check HAVE_CARBON if HAVE_X11 is set to yes.
- Check HAVE_CARBON before USE_TOOLKIT_SCROLL_BARS. Define
- USE_TOOLKIT_SCROLL_BARS by default if HAVE_CARBON is set to yes.
+ Check HAVE_CARBON before USE_TOOLKIT_SCROLL_BARS.
+ Define USE_TOOLKIT_SCROLL_BARS by default if HAVE_CARBON is set to yes.
2005-05-07 Jérôme Marant <jerome@marant.org>
* Makefile.in (uninstall): Ignore exit code of `rm'.
- * Makefile.in (uninstall): Remove more info files. Remove
- ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
+ * Makefile.in (uninstall): Remove more info files.
+ Remove ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
2001-01-31 Gerd Moellmann <gerd@gnu.org>
2001-01-28 Gerd Moellmann <gerd@gnu.org>
- * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
+ * Makefile.in (extraclean): Add -f to -rm config-tmp-* to keep
it quiet.
2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
(NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
(TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
files to .elc.
- (${TIT}): Adjusted for the above change.
+ (${TIT}): Adjust for the above change.
(clean mostlyclean): Likewise.
(.el.elc): New target.
2000-07-26 Dave Love <fx@gnu.org>
- * configure.in (AC_SYS_LARGEFILE): Moved earlier.
+ * configure.in (AC_SYS_LARGEFILE): Move earlier.
2000-07-24 Dave Love <fx@gnu.org>
* Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
New targets.
- (bootstrap): Rewritten in terms of the new targets above. Make
- info files, too.
+ (bootstrap): Rewritten in terms of the new targets above.
+ Make info files, too.
2000-03-12 Gerd Moellmann <gerd@gnu.org>
2000-01-03 Andreas Schwab <schwab@suse.de>
- * Makefile.in (install-arch-indep): Install autotype*. Run
- install-info on autotype and emacs-faq.info.
+ * Makefile.in (install-arch-indep): Install autotype*.
+ Run install-info on autotype and emacs-faq.info.
1999-12-04 Dave Love <fx@gnu.org>
1999-09-07 Gerd Moellmann <gerd@gnu.org>
- * configure.in (--with-sound): Removed.
+ * configure.in (--with-sound): Remove.
1999-08-30 Gerd Moellmann <gerd@gnu.org>
* configure.in: Use epaths.h and epaths-force instead of paths...
- * Makefile.in (epaths-force): Renamed from paths-force;
+ * Makefile.in (epaths-force): Rename from paths-force;
operate on epaths.in and produce epaths.h.
1999-02-24 Richard Stallman <rms@gnu.org>
1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
- * configure.in (x_default_search_path): Corrected
- '${x_library}' to '${x_library}/X11'.
+ * configure.in (x_default_search_path):
+ Corrected '${x_library}' to '${x_library}/X11'.
1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
* configure.in: Determine HAVE_X11R6.
- (HAVE_MENUS): Renamed from HAVE_X_MENU.
+ (HAVE_MENUS): Rename from HAVE_X_MENU.
1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
- * configure.in: Put back archlibdir initialization. Require
- autoconf 2.4.1 or later.
+ * configure.in: Put back archlibdir initialization.
+ Require autoconf 2.4.1 or later.
1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
* make-dist: Put src/makefile.nt in dist.
* configure.in (i[345]86-*-bsdi2*): New configuration.
- (vax-dec-bsd386*): Deleted.
+ (vax-dec-bsd386*): Delete.
1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
- * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
+ * configure.in (m68*-apollo-*): Rename from m68*-apollo*.
Use bsd4-3. Don't set NON_GNU_CPP.
* make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
- * Makefile.in (maintainer-clean): Renamed from realclean.
+ * Makefile.in (maintainer-clean): Rename from realclean.
1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
* Makefile.in: Use libexecdir and sharedstatedir as appropriate.
- * configure.in (libexecdir): Renamed from libdir. New default.
- (sharedstatedir): Renamed from statedir. New default.
+ * configure.in (libexecdir): Rename from libdir. New default.
+ (sharedstatedir): Rename from statedir. New default.
(datadir): New default.
* make-dist: Don't distribute subdirs.el.
1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
- * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
+ * configure.in (rs6000-bull-bosx*): Add support for BULL dpx20.
1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
* Makefile.in (mkdir): Make only the lockdir writable.
- * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
+ * configure.in (i860-*-sysv4): Rename from i860-*-sysvr4.
1993-12-11 Richard Stallman (rms@srarc2)
1993-09-28 Brian J. Fox (bfox@cubit)
* configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
- doesn't exist. Just copy src/Makefile.in instead. Touch
- all of the Makefiles after editing config.status.
+ doesn't exist. Just copy src/Makefile.in instead.
+ Touch all of the Makefiles after editing config.status.
* INSTALL: Update documentation to match new configuration
mechanism.
1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
- * configure.in: Remove check for $srcdir being configured. This
- pretty much works now.
+ * configure.in: Remove check for $srcdir being configured.
+ This pretty much works now.
Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
Check for XFree86 (/usr/X386/include) independent of whether
-lXbsd exists.
1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * configure.in (m88k-tektronix-sysv3*): Added the missing *.
+ * configure.in (m88k-tektronix-sysv3*): Add the missing *.
Use tekxd88, not tekXD88.
1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
* INSTALL: Mention its usage.
* configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
- the former gives you the operating system rev directly. Use
- s/hpux.h if we don't recognize what we got.
+ the former gives you the operating system rev directly.
+ Use s/hpux.h if we don't recognize what we got.
* Makefile.in (do-install): Don't remove a destination directory
if it's the same as the source. If ${srcdir}/info == ${infodir},
* Makefile.in (install): Split this into `install' and
`do-install', to give people more control over exactly what gets
done.
- (do-install): New target, containing the guts of `install'. Don't
- remove and recreate the directories inside the copying loop - do
+ (do-install): New target, containing the guts of `install'.
+ Don't remove and recreate the directories inside the copying loop - do
it all before the copying loop. Pass more flags to the lib-src
make.
(mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
* configure.in: Make the first line of the configure script be
"#!/bin/sh". Leaving the first line blank didn't work.
- * configure.in (long_usage): Removed; made short_usage describe
+ * configure.in (long_usage): Remove; made short_usage describe
the options briefly.
* configure.in: Implement the --prefix option.
* PROBLEMS: Some updates from David J. Mackenzie.
More changes from David J. Mackenzie.
- * Makefile.in (install.sysv, install.xenix, install.aix): Targets
- removed; autoconf and config.h should specify all these
+ * Makefile.in (install.sysv, install.xenix, install.aix):
+ Targets removed; autoconf and config.h should specify all these
differences.
(buildlisppath): Make this path depend on ${srcdir}.
- (INSTALLFLAGS): Removed.
+ (INSTALLFLAGS): Remove.
(INSTALL): Include the -c flag.
(install): Change the way we invoke install accordingly.
1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
+ * Makefile.in (DEFS): Delete; since we're using AC_CONFIG_HEADER,
this is always just -DHAVE_CONFIG_H.
The GNU coding standards specify that CFLAGS should be left for
users to set.
* Makefile.in (CFLAGS): Let configure determine the default value
- for this. Don't
- have it default to DEFS.
+ for this.
+ Don't have it default to DEFS.
(${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
(lib-src/Makefile, src/Makefile): Edit the default value for
CFLAGS into these files, not DEFS.
Use autoconf to produce Makefile and src/config.h.
Remove the Makefile-style comment that autoconf places at the top
of src/config.h.
- (config_h_opts): Removed - no longer necessary.
- * Makefile.in (configname): Renamed to configuration.
- (CONFIG_CFLAGS): Renamed to DEFS.
- (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
+ (config_h_opts): Remove - no longer necessary.
+ * Makefile.in (configname): Rename to configuration.
+ (CONFIG_CFLAGS): Rename to DEFS.
+ (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjust to
get values via autoload @cookies@.
(libsrc_libs): Get this from autoconf. We used to do nothing
about this.
(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
- * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
- echo the move-if-change command.
+ * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile):
+ Don't echo the move-if-change command.
1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
* configure: Properly handle extracting values of LIBS_MACHINE and
LIBS_SYSTEM that contain spaces.
- * configure: Add `--x-includes' and `--x-libraries' options. I
- think these are dopey, but no less than three alpha testers, at
+ * configure: Add `--x-includes' and `--x-libraries' options.
+ I think these are dopey, but no less than three alpha testers, at
large sites, have said they have their X files installed in odd
places. Implement them by setting C_SWITCH_X_SITE and
LD_SWITCH_X_SITE in src/config.h.
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
- (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
- to compensate.
+ (lispdir, locallisppath, etcdir, lockdir, archlibdir):
+ Adjust to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
- (options, boolean_opts): Deleted; we don't have enough options to
+ (options, boolean_opts): Delete; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
- Edit only the top Makefile. That should edit the others. Edit
- into the makefile: `version', from lisp/version.el, `configname'
+ Edit only the top Makefile. That should edit the others.
+ Edit into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
* make-dist: When setting up etc/COPYING, always nuke whatever is
there, and then copy it in, to make sure we get a real file.
- * make-dist: Don't try to distribute *.defns files any more. The
- only such file was for simula.el, which has been superseded by a
+ * make-dist: Don't try to distribute *.defns files any more.
+ The only such file was for simula.el, which has been superseded by a
version which doesn't have a separate .defns file.
1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
(mostlyclean): New target, synonymous with clean.
(realclean): New target. Currently, this just calls the
subdirectories's makefiles and then deletes config.status.
- (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
- variables.
+ (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA):
+ New variables.
Installation directory variables changed to conform.
- (install, install.sysv, install.xenix, install.aix): Changed the
+ (install, install.sysv, install.xenix, install.aix): Change the
code which copies the directories into their installed location to
allow the installed locations to be in several different
directories; the old version assumed that they would all be in
projects / emacs.git / commitdiff