* Installation Changes in Emacs 24.3
** The default toolkit has been changed to Gtk+ version 3.
-If you don't pass --with-x-toolkit to configure or if you pass
---with-x-toolkit=gtk or --with-x-toolkit=yes, configure will try to build
-with Gtk+ version 3, and if that fails, try Gtk+ version 2.
+If you don't pass `--with-x-toolkit' to configure, or if you use
+`--with-x-toolkit=gtk' or `--with-x-toolkit=yes', configure will try
+to build with Gtk+ version 3, and if that fails, try Gtk+ version 2.
You can explicitly require a specific version by passing
---with-x-toolkit=gtk2 or --with-x-toolkit=gtk3 to configure.
+`--with-x-toolkit=gtk2' or `--with-x-toolkit=gtk3' to configure.
-** New configure option '--without-all' to disable additional features.
+** New configure option `--without-all' to disable additional features.
This disables most of the features that are normally enabled by default.
-** New configure option '--enable-link-time-optimization' to utilize
+** New configure option `--enable-link-time-optimization' to utilize
an appropriate feature provided by GCC since version 4.5.0.
-** New configure option '--enable-gcc-warnings', intended for developers.
+** New configure option `--enable-gcc-warnings', intended for developers.
If building with GCC, this enables compile-time checks that warn about
possibly-questionable C code. On a recent GNU system there should be
no warnings; on older and on non-GNU systems the generated warnings
may be useful.
-** The configure option '--enable-use-lisp-union-type' has been
+** The configure option `--enable-use-lisp-union-type' has been
renamed to '--enable-check-lisp-object-type', as the resulting
Lisp_Object type no longer uses a union to implement the compile time
check that this option enables.
-** The configure option '--disable-maintainer-mode' has been removed,
+** The configure option `--disable-maintainer-mode' has been removed,
as it was confusingly-named and rarely useful.
-** You can use `NO_BIN_LINK=t make install' to prevent the installation
-overwriting "emacs" in the installation bin/ directory with a link
-to emacs-VERSION.
-
** The configure options `--program-prefix', `--program-suffix', and
`--program-transform-name' apply to more than just the installed
binaries. Now they also affect the man pages, icons, and the
etc/emacs.desktop file; but not the info pages, since this would break
links between the various manuals.
+** You can use `NO_BIN_LINK=t make install' to prevent the installation
+overwriting "emacs" in the installation bin/ directory with a link
+to emacs-VERSION.
+
** Emacs uses libtinfo in preference to libncurses, if available.
** On FreeBSD and NetBSD, configure no longer adds /usr/local/lib and
** Emacs no longer searches for `leim-list.el' files beneath the standard
lisp/ directory. There should not be any there anyway. If you have
-been adding them there, put them somewhere else, eg site-lisp.
+been adding them there, put them somewhere else; e.g., site-lisp.
** The `--no-site-lisp' command line option now works for Nextstep builds.
\f
* Changes in Emacs 24.3
-** Most y-or-n prompts now allow you to scroll the selected window.
-Typing C-v or M-v at a y-or-n prompt scrolls forward or backward
+** Most `y-or-n' prompts now allow you to scroll the selected window.
+Typing `C-v' or `M-v' at a y-or-n prompt scrolls forward or backward
respectively, without exiting from the prompt.
** Mode line changes
*** In minibuffer filename prompts, `C-M-f' and `C-M-b' now move to the
next and previous path separator, respectively.
-*** minibuffer-electric-default-mode can rewrite (default ...) to [...].
-Just set minibuffer-eldef-shorten-default to t before enabling the mode.
+*** `minibuffer-electric-default-mode' can shorten "(default ...)" to "[...]"
+in minibuffer prompts. Just set `minibuffer-eldef-shorten-default'
+non-nil before enabling the mode.
** ImageMagick support, if available, is automatically enabled.
It is no longer necessary to call `imagemagick-register-types'
automatically at startup, or when customizing an imagemagick- option.
*** Setting `imagemagick-types-inhibit' to t now disables the use of
-ImageMagick to view images. You must call imagemagick-register-types
-afterwards if you do not use customize to change this.
+ImageMagick to view images. (You must call `imagemagick-register-types'
+afterwards if you do not use customize to change this.)
*** The new variable `imagemagick-enabled-types' also affects which
ImageMagick types are treated as images. The function
treated as images.
*** Images displayed via ImageMagick now support transparency and the
-:background image spec property.
+:background image specification property.
** Server and client changes
** Nextstep (GNUstep / Mac OS X) port changes
-*** Fullscreen and frame parameter fullscreen is supported.
+*** Support for fullscreen and the frame parameter fullscreen.
*** A file dialog is used for open/save operations initiated from the
menu/toolbar.
Each sequence of spaces in the supplied search string may match any
sequence of one or more whitespace characters, as specified by the
variable `search-whitespace-regexp'. (This variable is also used by a
-similar existing feature for regexp Isearch).
+similar existing feature for regexp Isearch.)
*** New Isearch command `M-s SPC' toggles lax space matching.
This applies to both ordinary and regexp Isearch.
** Register changes
-*** `C-x r +' is now overloaded to invoke `append-to-register.
+*** `C-x r +' is now overloaded to invoke `append-to-register'.
*** New option `register-separator' specifies the register containing
-the text to put between collected texts for use with M-x
-append-to-register and M-x prepend-to-register.
+the text to put between collected texts for use with
+M-x append-to-register and M-x prepend-to-register.
** `C-u M-=' now counts lines/words/characters in the entire buffer.
-** New command `C-x r M-w' (copy-rectangle-as-kill).
+** New command `C-x r M-w' (`copy-rectangle-as-kill').
It copies the region-rectangle as the last rectangle kill.
** New option `yank-handled-properties' allows processing of text
-properties on yanked text, in more ways that are more general than
-just removing them, as done by `yank-excluded-properties'.
+properties on yanked text, in ways that are more general than just
+removing them, as done by `yank-excluded-properties'.
\f
* Changes in Specialized Modes and Packages in Emacs 24.3
These faces are named `apropos-symbol', `apropos-keybinding', and so on;
see the `apropos' Custom group for details.
-*** The old options whose values specified faces to use were removed
+*** The old options whose values specified faces to use have been removed
(i.e. `apropos-symbol-face', `apropos-keybinding-face', etc.).
** Buffer Menu
-This package has been rewritten to use Tabulated List mode.
+
+*** This package has been rewritten to use Tabulated List mode.
*** Option `Buffer-menu-buffer+size-width' is now obsolete.
Use `Buffer-menu-name-width' and `Buffer-menu-size-width' instead.
** CL
*** CL's main entry is now (require 'cl-lib).
-`cl-lib' is like the old `cl' except that it uses the namespace cleanly,
-i.e. all its definitions have the "cl-" prefix (and internal definitions use
-the "cl--" prefix).
+`cl-lib' is like the old `cl' except that it uses the namespace cleanly;
+i.e., all its definitions have the "cl-" prefix (and internal definitions
+use the "cl--" prefix).
-If `cl' provided a feature under the name `foo', then `cl-lib' provides it
-under the name `cl-foo' instead, with the exceptions of the few definitions
-that had to use `foo*' to avoid conflicts with pre-existing Elisp entities,
-which have not been renamed to `cl-foo*' but just `cl-foo'.
+If `cl' provided a feature under the name `foo', then `cl-lib'
+provides it under the name `cl-foo' instead; with the exceptions of the
+few `cl' definitions that had to use `foo*' to avoid conflicts with
+pre-existing Elisp entities. These have been renamed to `cl-foo'
+rather than `cl-foo*'.
The old `cl' is now deprecated and is mainly just a bunch of aliases that
-provide the old non-prefixed names. Some exceptions are listed below.
+provide the old, non-prefixed names. Some exceptions are listed below:
*** `cl-flet' is not like `flet' (which is deprecated).
Instead it obeys the behavior of Common-Lisp's `flet'.
whereas in flet the scoping is dynamic.
*** `cl-labels' is slightly different from `labels'.
-The difference is that it relies on the `lexical-binding' machinery (as opposed
-to the `lexical-let' machinery used previously) to capture definitions in
-closures, so such closures will only work if `lexical-binding' is in use.
+The difference is that it relies on the `lexical-binding' machinery
+(as opposed to the `lexical-let' machinery used previously) to capture
+definitions in closures, so such closures will only work if `lexical-binding'
+is in use.
*** `cl-letf' is not exactly like `letf'.
The only difference is in details that relate to some deprecated usage
of `symbol-function' in place forms.
*** `progv' was rewritten to use the `let' machinery.
-A side effect is that vars without corresponding value are bound to nil
-rather than making them unbound.
+A side effect is that variables without corresponding values are bound
+to nil rather than being made unbound.
*** The following methods of extending `setf' are obsolete
(use features from gv.el instead):
*** `custom-reset-button-menu' now defaults to t.
*** Non-option variables are never matched in `customize-apropos' and
-`customize-apropos-options' (i.e. the prefix argument does nothing for
+`customize-apropos-options' (i.e., the prefix argument does nothing for
these commands now).
** `desktop-path' no longer includes the "." directory.
*** Variables of type :(u)int32 and :(u)int64 accept floating points,
if their value does not fit into Emacs's integer range.
-*** The function `dbus-call-method' works non-blocking now, it can be
-interrupted by C-g. `dbus-call-method-non-blocking' is obsolete.
+*** The function `dbus-call-method' is now non-blocking.
+It can be interrupted by `C-g'. `dbus-call-method-non-blocking' is obsolete.
-*** Signals can be sent also as unicast message.
+*** Signals can also be sent as unicast messages.
*** The argument list of `dbus-register-signal' has been extended,
-according to the new match rule types of D-Bus. See the manual for
-details.
+according to the new match rule types of D-Bus. See the manual for details.
*** `dbus-init-bus' supports private connections.
if the command ends in `;' (when operating on multiple files).
Otherwise, it executes the command on each file in parallel.
-*** Typing M-n in the minibuffer of `dired-do-chmod', `dired-do-chgrp',
-`dired-do-chown', `dired-do-touch' pulls the file attributes of the
+*** Typing `M-n' in the minibuffer of `dired-do-chmod', `dired-do-chgrp',
+`dired-do-chown', and `dired-do-touch' yanks the attributes of the
file at point.
*** When the region is active, `m' (`dired-mark'), `u' (`dired-unmark'),
-`DEL' (`dired-unmark-backward'), `d' (`dired-flag-file-deletion')
+`DEL' (`dired-unmark-backward'), and `d' (`dired-flag-file-deletion')
mark/unmark/flag all files in the active region.
*** The minibuffer default for `=' (`dired-diff) has changed.
shell-interaction compatible with iPython (and virtually any other
text based shell).
-*** Some user options have been replaced/renamed:
+*** Some user options have been replaced/renamed, including:
Old defcustom: | New defcustom:
python-indent | python-indent-offset
python-guess-indent | python-indent-guess-indent-offset
python-pdbtrack-do-tracking-p | python-pdbtrack-activate
python-use-skeletons | python-skeleton-autoinsert
-*** Some user options have been removed:
+*** Some user options have been removed, including:
**** `python-indent-string-contents': Strings are never indented.
** Shell Script mode
-*** Pairing of parens/quotes uses electric-pair-mode instead of skeleton-pair.
+*** Pairing of parens/quotes uses `electric-pair-mode' instead of skeleton-pair.
*** `sh-electric-here-document-mode' now controls auto-insertion of here-docs.
by a backslash. The default does not escape the newlines and assumes
that the sql statement will be terminated by a semicolon.
-** Tabulated List and packages derived from it
-
-*** New command `tabulated-list-sort', bound to `S', sorts the column
-at point, or the Nth column if a numeric prefix argument is given.
+** New command `tabulated-list-sort', bound to `S' in Tabulated List mode
+(and modes that derive from it), sorts the column at point, or the Nth
+column if a numeric prefix argument is given.
** Term
-*** The variables `term-default-fg-color' and `term-default-bg-color' are
-now deprecated in favor of the customizable face `term'.
+*** The variables `term-default-fg-color' and `term-default-bg-color'
+are now deprecated in favor of the customizable face `term'.
*** You can customize how to display ANSI terminal colors and styles
by customizing the corresponding `term-color-<COLOR>',
*** The syntax has been extended in order to allow ad-hoc proxy definitions.
See the manual for details.
-*** Remote processes are now supported also on remote Windows host.
+*** Remote processes are now also supported on remote MS-Windows hosts.
** URL
*** Structs made by `url-generic-parse-url' have nil `attributes' slot.
Previously, this slot stored semicolon-separated attribute-value pairs
appended to some imap URLs, but this is not compatible with RFC 3986.
-So now the `filename' slot stores the entire path and query components
+So now the `filename' slot stores the entire path and query components,
and the `attributes' slot is always nil.
*** New function `url-encode-url' for encoding a URI string.
** `which-func-modes' now defaults to t, so Which Function mode, when
enabled, applies to all applicable major modes.
-** winner-mode-hook now runs when the mode is disabled, as well as when it is
-enabled.
+** winner-mode-hook now runs when the mode is disabled, as well as when
+it is enabled.
** Hooks renamed to avoid obsolete "-hooks" suffix:
*** semantic-lex-reset-hooks -> semantic-lex-reset-functions
** set-buffer-multibyte now signals an error in narrowed buffers.
-** (random) by default now returns a different random sequence in
-every Emacs run. Use (random S), where S is a string, to set the
+** `random' by default now returns a different random sequence in
+every Emacs run. Use `(random S)', where S is a string, to set the
random seed to a value based on S, in order to get a repeatable
sequence in later calls.
gv.el for internal details of the new implementation.
** Spelling changes.
-Some Lisp symbols have been renamed to avoid problems with spelling
-that is incorrect or inconsistent with how Emacs normally spells a word.
+Some Lisp symbols have been renamed to correct their spelling,
+or to be more consistent with standard Emacs terminology.
*** Renamed functions
-
**** hangul-input-method-inactivate -> hangul-input-method-deactivate
**** inactivate-input-method -> deactivate-input-method
**** quail-inactivate -> quail-deactivate
*** `read-regexp' has a new argument HISTORY; the first argument PROMPT
of `read-regexp' accepts a string ending with a colon and space, and its
-second argument DEFAULTS can be a list of strings accessible via M-n
+second argument DEFAULTS can be a list of strings accessible via `M-n'
in the minibuffer ahead of other hard-coded useful regexp-related values.
More commands use `read-regexp' now to read their regexp arguments.
** Window changes
-*** The functions get-lru-window, get-mru-window and get-largest-window
+*** The functions `get-lru-window', `get-mru-window' and `get-largest-window'
now accept a third argument to avoid choosing the selected window.
*** Additional values recognized for option `window-combination-limit'.
*** The command `fit-window-to-buffer' can adjust the frame height
if the new option `fit-frame-to-buffer' is non-nil.
-*** New option switch-to-buffer-preserve-window-point to restore a
+*** New option `switch-to-buffer-preserve-window-point' to restore a
window's point when switching buffers.
*** New display action functions `display-buffer-below-selected',
specifies window to reuse in `display-buffer-in-previous-window'.
*** New display action alist entries `window-height' and `window-width'
-to specify size of new window created by `display-buffer'.
+specify the size of new windows created by `display-buffer'.
*** The following variables are obsolete, as they can be replaced by
appropriate entries in the `display-buffer-alist' function introduced
in Emacs 24.1:
-
+**** `dired-shrink-to-fit'
**** `display-buffer-reuse-frames'
-
-**** `special-display-regexps'
-
-**** `special-display-frame-alist'
-
+**** `display-buffer-function'
**** `special-display-buffer-names'
-
+**** `special-display-frame-alist'
**** `special-display-function'
-
-**** `display-buffer-function'
-
-**** `dired-shrink-to-fit'
+**** `special-display-regexps'
** Time
*** `current-time' now returns extended-format time stamps
(HIGH LOW USEC PSEC), where the new PSEC slot specifies picoseconds.
PSEC is typically a multiple of 1000 on current machines. Other
-functions that use this format, such as file-attributes and
-format-time-string, have been changed accordingly. Old-format time
+functions that use this format, such as `file-attributes' and
+`format-time-string', have been changed accordingly. Old-format time
stamps are still accepted.
-*** The format of timers in timer-list and timer-idle-list is now
+*** The format of timers in `timer-list' and `timer-idle-list' is now
[TRIGGERED-P HI-SECS LO-SECS USECS REPEAT-DELAY FUNCTION ARGS IDLE-DELAY PSECS].
The PSECS slot is new, and uses picosecond resolution. It can be
-accessed via the new timer--psecs accessor.
+accessed via the new `timer--psecs' accessor.
*** Last-modified time stamps in undo lists now are of the form
(t HI-SECS LO-SECS USECS PSECS) instead of (t HI-SECS . LO-SECS).
** Floating point functions now always return special values like NaN,
-instead of signaling errors, if given invalid args, e.g. (log -1.0).
+instead of signaling errors, if given invalid args; e.g., (log -1.0).
Previously, they returned NaNs on some platforms but signaled errors
on others. The affected functions are acos, asin, tan, exp, expt,
log, log10, sqrt, and mod.
** Changes to special forms and macros
-*** `defun' and `defmacro' are now macros rather than special forms
+*** `defun' and `defmacro' are now macros rather than special forms.
*** `kbd' is now a function rather than a macro.
* Changes in Emacs 24.3 on non-free operating systems
** Cygwin builds can use the native MS Windows user interface.
-Pass --with-w32 to configure. The default remains the X11 interface.
+Pass `--with-w32' to configure. The default remains the X11 interface.
** Two new functions are available in Cygwin builds:
`cygwin-convert-file-name-from-windows' and
** On MS Windows Vista and later Emacs now supports symbolic links.
-** On MS Windows, you can pass --without-libxml2 to configure.bat to omit
+** On MS Windows, you can pass `--without-libxml2' to configure.bat to omit
support for libxml2, even if its presence is detected.
** On Mac OS X, the Nextstep port requires OS X 10.4 or later.
-** On Mac OS X, configure no longer automatically adds the Fink /sw
+** On Mac OS X, configure no longer automatically adds the Fink "/sw"
directories to the search path. You must add them yourself if you want them.
\f
projects / emacs.git / commitdiff