eval.o floatfns.o fns.o font.o print.o lread.o \
syntax.o $(UNEXEC_OBJ) bytecode.o \
process.o gnutls.o callproc.o \
- region-cache.o sound.o atimer.o \
+ region-cache.o sound.o atimer.o thread.o \
doprnt.o intervals.o textprop.o composite.o xml.o \
$(MSDOS_OBJ) $(MSDOS_X_OBJ) $(NS_OBJ) $(CYGWIN_OBJ) $(FONT_OBJ)
obj = $(base_obj) $(NS_OBJC_OBJ)
enum mem_type type;
};
-/* Base address of stack. Set in main. */
-
-Lisp_Object *stack_base;
-
/* Root of the tree describing allocated Lisp memory. */
static struct mem_node *mem_root;
# define DEADP(x) 0
#endif
-/* Recording what needs to be marked for gc. */
-
-struct gcpro *gcprolist;
-
/* Addresses of staticpro'd variables. Initialize it to a nonzero
value; otherwise some compilers put it into BSS. */
Lisp_Object o;
jmp_buf j;
} j;
- volatile int stack_grows_down_p = (char *) &j > (char *) stack_base;
+ volatile int stack_grows_down_p = (char *) &j > (char *) stack_bottom;
#endif
/* This trick flushes the register windows so that all the state of
the process is contained in the stack. */
/* This assumes that the stack is a contiguous region in memory. If
that's not the case, something has to be done here to iterate
over the stack segments. */
- mark_memory (stack_base, end);
+ mark_memory (stack_bottom, end);
/* Allow for marking a secondary stack, like the register stack on the
ia64. */
#include "keymap.h"
#include "frame.h"
-struct buffer *current_buffer; /* the current buffer */
-
/* First buffer in chain of all buffers (in reverse order of creation).
Threaded through ->header.next.buffer. */
#define FOR_EACH_BUFFER(b) \
for ((b) = all_buffers; (b); (b) = (b)->header.next.buffer)
-/* This points to the current buffer. */
-
-extern struct buffer *current_buffer;
-
/* This structure holds the default values of the buffer-local variables
that have special slots in each buffer.
The default value occupies the same slot in this structure
done. Signaling an error truncates the list analogous to
gcprolist. */
-struct byte_stack *byte_stack_list;
+/* struct byte_stack *byte_stack_list; */
\f
/* Mark objects on byte_stack_list. Called during GC. */
int display_arg;
#endif
-/* An address near the bottom of the stack.
- Tells GC how to save a copy of the stack. */
-char *stack_bottom;
-
#if defined (DOUG_LEA_MALLOC) || defined (GNU_LINUX)
/* The address where the heap starts (from the first sbrk (0) call). */
static void *my_heap_start;
int
main (int argc, char **argv)
{
-#if GC_MARK_STACK
- Lisp_Object dummy;
-#endif
char stack_bottom_variable;
int do_initial_setlocale;
int skip_args = 0;
#endif
char *ch_to_dir;
-#if GC_MARK_STACK
- stack_base = &dummy;
-#endif
+ /* Record (approximately) where the stack begins. */
+ stack_bottom = &stack_bottom_variable;
#if defined (USE_GTK) && defined (G_SLICE_ALWAYS_MALLOC)
/* This is used by the Cygwin build. */
}
#endif /* HAVE_SETRLIMIT and RLIMIT_STACK */
- /* Record (approximately) where the stack begins. */
- stack_bottom = &stack_bottom_variable;
-
clearerr (stdin);
#ifndef SYSTEM_MALLOC
unsigned int debug_on_exit : 1;
};
-static struct backtrace *backtrace_list;
+/* static struct backtrace *backtrace_list; */
-#if !BYTE_MARK_STACK
-static
-#endif
-struct catchtag *catchlist;
+/* #if !BYTE_MARK_STACK */
+/* static */
+/* #endif */
+/* struct catchtag *catchlist; */
/* Chain of condition handlers currently in effect.
The elements of this chain are contained in the stack frames
When an error is signaled (by calling Fsignal, below),
this chain is searched for an element that applies. */
-#if !BYTE_MARK_STACK
-static
-#endif
-struct handler *handlerlist;
+/* #if !BYTE_MARK_STACK */
+/* static */
+/* #endif */
+/* struct handler *handlerlist; */
#ifdef DEBUG_GCPRO
/* Count levels of GCPRO to detect failure to UNGCPRO. */
/* Current number of specbindings allocated in specpdl. */
-ptrdiff_t specpdl_size;
+/* ptrdiff_t specpdl_size; */
/* Pointer to beginning of specpdl. */
-struct specbinding *specpdl;
+/* struct specbinding *specpdl; */
/* Pointer to first unused element in specpdl. */
-struct specbinding *specpdl_ptr;
+/* struct specbinding *specpdl_ptr; */
/* Depth in Lisp evaluations and function calls. */
-static EMACS_INT lisp_eval_depth;
+/* static EMACS_INT lisp_eval_depth; */
/* The value of num_nonmacro_input_events as of the last time we
started to enter the debugger. If we decide to enter the debugger
c.tag = tag;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
/* Unwind the specpdl stack, and then restore the proper set of
handlers. */
unbind_to (catchlist->pdlcount, Qnil);
- handlerlist = catchlist->handlerlist;
+ handlerlist = catchlist->f_handlerlist;
catchlist = catchlist->next;
}
while (! last_time);
gcpro_level = gcprolist ? gcprolist->level + 1 : 0;
#endif
backtrace_list = catch->backlist;
- lisp_eval_depth = catch->lisp_eval_depth;
+ lisp_eval_depth = catch->f_lisp_eval_depth;
_longjmp (catch->jmp, 1);
}
c.tag = Qnil;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
c.tag = Qnil;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
c.tag = Qnil;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
c.tag = Qnil;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
c.tag = Qnil;
c.val = Qnil;
c.backlist = backtrace_list;
- c.handlerlist = handlerlist;
- c.lisp_eval_depth = lisp_eval_depth;
+ c.f_handlerlist = handlerlist;
+ c.f_lisp_eval_depth = lisp_eval_depth;
c.pdlcount = SPECPDL_INDEX ();
c.poll_suppress_count = poll_suppress_count;
c.interrupt_input_blocked = interrupt_input_blocked;
Lisp_Object unused; /* Dividing by 16 is faster than by 12 */
};
-extern struct specbinding *specpdl;
-extern struct specbinding *specpdl_ptr;
-extern ptrdiff_t specpdl_size;
-
#define SPECPDL_INDEX() (specpdl_ptr - specpdl)
/* Everything needed to describe an active condition case. */
struct gcpro *gcpro;
jmp_buf jmp;
struct backtrace *backlist;
- struct handler *handlerlist;
- EMACS_INT lisp_eval_depth;
+ struct handler *f_handlerlist;
+ EMACS_INT f_lisp_eval_depth;
ptrdiff_t pdlcount;
int poll_suppress_count;
int interrupt_input_blocked;
extern Lisp_Object memory_signal_data;
-/* An address near the bottom of the stack.
- Tells GC how to save a copy of the stack. */
-extern char *stack_bottom;
-
/* Check quit-flag and quit if it is non-nil.
Typing C-g does not directly cause a quit; it only sets Vquit_flag.
So the program needs to do QUIT at times when it is safe to quit.
Every function that can call Feval must protect in this fashion all
Lisp_Object variables whose contents will be used again. */
-extern struct gcpro *gcprolist;
-
struct gcpro
{
struct gcpro *next;
#else
-extern int gcpro_level;
-
#define GCPRO1(varname) \
{gcpro1.next = gcprolist; gcpro1.var = &varname; gcpro1.nvars = 1; \
gcpro1.level = gcpro_level++; \
#endif
extern const char *pending_malloc_warning;
extern Lisp_Object zero_vector;
-extern Lisp_Object *stack_base;
extern EMACS_INT consing_since_gc;
extern EMACS_INT gc_relative_threshold;
extern EMACS_INT memory_full_cons_threshold;
extern Lisp_Object Vsignaling_function;
extern Lisp_Object inhibit_lisp_code;
extern int handling_signal;
-#if BYTE_MARK_STACK
-extern struct catchtag *catchlist;
-extern struct handler *handlerlist;
-#endif
/* To run a normal hook, use the appropriate function from the list below.
The calling convention:
/* Defined in bytecode.c */
extern Lisp_Object Qbytecode;
extern void syms_of_bytecode (void);
-extern struct byte_stack *byte_stack_list;
#if BYTE_MARK_STACK
extern void mark_byte_stack (void);
#endif
#include "globals.h"
+#include "thread.h"
/* Check whether it's time for GC, and run it if so. */
# define IF_LINT(Code) /* empty */
#endif
\f
+#ifndef emacs
/* Set by `re_set_syntax' to the current regexp syntax to recognize. Can
also be assigned to arbitrarily: each pattern buffer stores its own
syntax, so it can be changed between regex compilations. */
/* This has no initializer because initialized variables in Emacs
become read-only after dumping. */
reg_syntax_t re_syntax_options;
+#endif
/* Specify the precise syntax of regexps for compilation. This provides
}
WEAK_ALIAS (__re_set_syntax, re_set_syntax)
+#ifndef emacs
/* Regexp to use to replace spaces, or NULL meaning don't. */
static re_char *whitespace_regexp;
+#endif
void
re_set_whitespace_regexp (const char *regexp)
WEAK_ALIAS (__re_match, re_match)
#endif /* not emacs */
-#ifdef emacs
-/* In Emacs, this is the string or buffer in which we
- are matching. It is used for looking up syntax properties. */
-Lisp_Object re_match_object;
-#endif
-
/* re_match_2 matches the compiled pattern in BUFP against the
the (virtual) concatenation of STRING1 and STRING2 (of length SIZE1
and SIZE2, respectively). We start matching at POS, and stop
some interfaces). When a regexp is compiled, the syntax used is
stored in the pattern buffer, so changing this does not affect
already-compiled regexps. */
-extern reg_syntax_t re_syntax_options;
+/* extern reg_syntax_t re_syntax_options; */
#ifdef emacs
/* In Emacs, this is the string or buffer in which we
are matching. It is used for looking up syntax properties. */
-extern Lisp_Object re_match_object;
+/* extern Lisp_Object re_match_object; */
#endif
\f
struct regexp_cache
{
struct regexp_cache *next;
- Lisp_Object regexp, whitespace_regexp;
+ Lisp_Object regexp, f_whitespace_regexp;
/* Syntax table for which the regexp applies. We need this because
of character classes. If this is t, then the compiled pattern is valid
for any syntax-table. */
to call re_set_registers after compiling a new pattern or after
setting the match registers, so that the regex functions will be
able to free or re-allocate it properly. */
-static struct re_registers search_regs;
+/* static struct re_registers search_regs; */
/* The buffer in which the last search was performed, or
Qt if the last search was done in a string;
Qnil if no searching has been done yet. */
-static Lisp_Object last_thing_searched;
+/* static Lisp_Object last_thing_searched; */
/* Error condition signaled when regexp compile_pattern fails. */
static Lisp_Object Qinvalid_regexp;
cp->buf.multibyte = STRING_MULTIBYTE (pattern);
cp->buf.charset_unibyte = charset_unibyte;
if (STRINGP (Vsearch_spaces_regexp))
- cp->whitespace_regexp = Vsearch_spaces_regexp;
+ cp->f_whitespace_regexp = Vsearch_spaces_regexp;
else
- cp->whitespace_regexp = Qnil;
+ cp->f_whitespace_regexp = Qnil;
/* rms: I think BLOCK_INPUT is not needed here any more,
because regex.c defines malloc to call xmalloc.
&& cp->posix == posix
&& (EQ (cp->syntax_table, Qt)
|| EQ (cp->syntax_table, BVAR (current_buffer, syntax_table)))
- && !NILP (Fequal (cp->whitespace_regexp, Vsearch_spaces_regexp))
+ && !NILP (Fequal (cp->f_whitespace_regexp, Vsearch_spaces_regexp))
&& cp->buf.charset_unibyte == charset_unibyte)
break;
/* If non-zero the match data have been saved in saved_search_regs
during the execution of a sentinel or filter. */
-static int search_regs_saved;
-static struct re_registers saved_search_regs;
-static Lisp_Object saved_last_thing_searched;
+/* static int search_regs_saved; */
+/* static struct re_registers saved_search_regs; */
+/* static Lisp_Object saved_last_thing_searched; */
/* Called from Flooking_at, Fstring_match, search_buffer, Fstore_match_data
if asynchronous code (filter or sentinel) is running. */
searchbufs[i].buf.buffer = xmalloc (100);
searchbufs[i].buf.fastmap = searchbufs[i].fastmap;
searchbufs[i].regexp = Qnil;
- searchbufs[i].whitespace_regexp = Qnil;
+ searchbufs[i].f_whitespace_regexp = Qnil;
searchbufs[i].syntax_table = Qnil;
staticpro (&searchbufs[i].regexp);
- staticpro (&searchbufs[i].whitespace_regexp);
+ staticpro (&searchbufs[i].f_whitespace_regexp);
staticpro (&searchbufs[i].syntax_table);
searchbufs[i].next = (i == REGEXP_CACHE_SIZE-1 ? 0 : &searchbufs[i+1]);
}
--- /dev/null
+/* Threading code.
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+This file is part of GNU Emacs.
+
+GNU Emacs is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+GNU Emacs is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */
+
+
+#include <config.h>
+#include <setjmp.h>
+#include "lisp.h"
+
+struct thread_state the_only_thread;
+
+struct thread_state *current_thread = &the_only_thread;
--- /dev/null
+/* Thread definitions
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+This file is part of GNU Emacs.
+
+GNU Emacs is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+GNU Emacs is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef THREAD_H
+#define THREAD_H
+
+#include "regex.h"
+
+struct thread_state
+{
+ /* The buffer in which the last search was performed, or
+ Qt if the last search was done in a string;
+ Qnil if no searching has been done yet. */
+ Lisp_Object m_last_thing_searched;
+#define last_thing_searched (current_thread->m_last_thing_searched)
+
+ Lisp_Object m_saved_last_thing_searched;
+#define saved_last_thing_searched (current_thread->m_saved_last_thing_searched)
+
+ /* m_gcprolist must be the first non-lisp field. */
+ /* Recording what needs to be marked for gc. */
+ struct gcpro *m_gcprolist;
+#define gcprolist (current_thread->m_gcprolist)
+
+ /* A list of currently active byte-code execution value stacks.
+ Fbyte_code adds an entry to the head of this list before it starts
+ processing byte-code, and it removed the entry again when it is
+ done. Signalling an error truncates the list analoguous to
+ gcprolist. */
+ struct byte_stack *m_byte_stack_list;
+#define byte_stack_list (current_thread->m_byte_stack_list)
+
+ /* An address near the bottom of the stack.
+ Tells GC how to save a copy of the stack. */
+ char *m_stack_bottom;
+#define stack_bottom (current_thread->m_stack_bottom)
+
+ /* An address near the top of the stack. */
+ char *stack_top;
+
+ struct backtrace *m_backtrace_list;
+#define backtrace_list (current_thread->m_backtrace_list)
+
+ struct catchtag *m_catchlist;
+#define catchlist (current_thread->m_catchlist)
+
+ /* Chain of condition handlers currently in effect.
+ The elements of this chain are contained in the stack frames
+ of Fcondition_case and internal_condition_case.
+ When an error is signaled (by calling Fsignal, below),
+ this chain is searched for an element that applies. */
+ struct handler *m_handlerlist;
+#define handlerlist (current_thread->m_handlerlist)
+
+ /* Count levels of GCPRO to detect failure to UNGCPRO. */
+ int m_gcpro_level;
+#define gcpro_level (current_thread->m_gcpro_level)
+
+ /* Current number of specbindings allocated in specpdl. */
+ ptrdiff_t m_specpdl_size;
+#define specpdl_size (current_thread->m_specpdl_size)
+
+ /* Pointer to beginning of specpdl. */
+ struct specbinding *m_specpdl;
+#define specpdl (current_thread->m_specpdl)
+
+ /* Pointer to first unused element in specpdl. */
+ struct specbinding *m_specpdl_ptr;
+#define specpdl_ptr (current_thread->m_specpdl_ptr)
+
+ /* Depth in Lisp evaluations and function calls. */
+ EMACS_INT m_lisp_eval_depth;
+#define lisp_eval_depth (current_thread->m_lisp_eval_depth)
+
+ /* This points to the current buffer. */
+ struct buffer *m_current_buffer;
+#define current_buffer (current_thread->m_current_buffer)
+
+ /* Every call to re_match, etc., must pass &search_regs as the regs
+ argument unless you can show it is unnecessary (i.e., if re_match
+ is certainly going to be called again before region-around-match
+ can be called).
+
+ Since the registers are now dynamically allocated, we need to make
+ sure not to refer to the Nth register before checking that it has
+ been allocated by checking search_regs.num_regs.
+
+ The regex code keeps track of whether it has allocated the search
+ buffer using bits in the re_pattern_buffer. This means that whenever
+ you compile a new pattern, it completely forgets whether it has
+ allocated any registers, and will allocate new registers the next
+ time you call a searching or matching function. Therefore, we need
+ to call re_set_registers after compiling a new pattern or after
+ setting the match registers, so that the regex functions will be
+ able to free or re-allocate it properly. */
+ struct re_registers m_search_regs;
+#define search_regs (current_thread->m_search_regs)
+
+ /* If non-zero the match data have been saved in saved_search_regs
+ during the execution of a sentinel or filter. */
+ int m_search_regs_saved;
+#define search_regs_saved (current_thread->m_search_regs_saved)
+
+ struct re_registers m_saved_search_regs;
+#define saved_search_regs (current_thread->m_saved_search_regs)
+
+ /* This is the string or buffer in which we
+ are matching. It is used for looking up syntax properties. */
+ Lisp_Object m_re_match_object;
+#define re_match_object (current_thread->m_re_match_object)
+
+ /* Set by `re_set_syntax' to the current regexp syntax to recognize. Can
+ also be assigned to arbitrarily: each pattern buffer stores its own
+ syntax, so it can be changed between regex compilations. */
+ reg_syntax_t m_re_syntax_options;
+#define re_syntax_options (current_thread->m_re_syntax_options)
+
+ /* Regexp to use to replace spaces, or NULL meaning don't. */
+ /*re_char*/ unsigned char *m_whitespace_regexp;
+#define whitespace_regexp (current_thread->m_whitespace_regexp)
+};
+
+extern struct thread_state *current_thread;
+
+#endif /* THREAD_H */
struct vectorlike_header header;
Lisp_Object selected_frame;
Lisp_Object current_window;
- Lisp_Object current_buffer;
+ Lisp_Object f_current_buffer;
Lisp_Object minibuf_scroll_window;
Lisp_Object minibuf_selected_window;
Lisp_Object root_window;
data = (struct save_window_data *) XVECTOR (configuration);
saved_windows = XVECTOR (data->saved_windows);
- new_current_buffer = data->current_buffer;
+ new_current_buffer = data->f_current_buffer;
if (NILP (BVAR (XBUFFER (new_current_buffer), name)))
new_current_buffer = Qnil;
else
data->frame_tool_bar_lines = FRAME_TOOL_BAR_LINES (f);
data->selected_frame = selected_frame;
data->current_window = FRAME_SELECTED_WINDOW (f);
- XSETBUFFER (data->current_buffer, current_buffer);
+ XSETBUFFER (data->f_current_buffer, current_buffer);
data->minibuf_scroll_window = minibuf_level > 0 ? Vminibuf_scroll_window : Qnil;
data->minibuf_selected_window = minibuf_level > 0 ? minibuf_selected_window : Qnil;
data->root_window = FRAME_ROOT_WINDOW (f);
|| d1->frame_lines != d2->frame_lines
|| d1->frame_menu_bar_lines != d2->frame_menu_bar_lines
|| !EQ (d1->selected_frame, d2->selected_frame)
- || !EQ (d1->current_buffer, d2->current_buffer)
+ || !EQ (d1->f_current_buffer, d2->f_current_buffer)
|| (!ignore_positions
&& (!EQ (d1->minibuf_scroll_window, d2->minibuf_scroll_window)
|| !EQ (d1->minibuf_selected_window, d2->minibuf_selected_window)))
projects / emacs.git / commitdiff