`6 9 a' inserts 69 `a's into the buffer.
`6 9 \\[autoarg-terminate] \\[autoarg-terminate]' inserts `69' into the buffer and
then invokes the normal binding of \\[autoarg-terminate].
-`C-u \\[autoarg-terminate]' invokes the normal binding of \\[autoarg-terminate] four times.
+`\\[universal-argument] \\[autoarg-terminate]' invokes the normal binding of \\[autoarg-terminate] four times.
\\{autoarg-mode-map}"
:lighter" Aarg" :global t :group 'keyboard)
bookmark name, type C-w while setting a bookmark. Successive C-w's
yank successive words.
-Typing C-u inserts (at the bookmark name prompt) the name of the last
+Typing \\[universal-argument] inserts (at the bookmark name prompt) the name of the last
bookmark used in the document where the new bookmark is being set;
this helps you use a single bookmark name to track progress through a
large document. If there is no prior bookmark for this document, then
-C-u inserts an appropriate name based on the buffer or file.
+\\[universal-argument] inserts an appropriate name based on the buffer or file.
Use \\[bookmark-delete] to remove bookmarks (you give it a name and
it removes only the first instance of a bookmark with that name from
bookmark name, type C-w while setting a bookmark. Successive C-w's
yank successive words.
-Typing C-u inserts (at the bookmark name prompt) the name of the last
+Typing \\[universal-argument] inserts (at the bookmark name prompt) the name of the last
bookmark used in the document where the new bookmark is being set;
this helps you use a single bookmark name to track progress through a
large document. If there is no prior bookmark for this document, then
-C-u inserts an appropriate name based on the buffer or file.
+\\[universal-argument] inserts an appropriate name based on the buffer or file.
Use \\[bookmark-delete] to remove bookmarks (you give it a name and
it removes only the first instance of a bookmark with that name from
"Save currently defined bookmarks in FILE.
FILE defaults to `bookmark-default-file'.
With prefix PARG, query user for a file to save in.
-If MAKE-DEFAULT is non-nil (interactively with prefix C-u C-u)
+If MAKE-DEFAULT is non-nil (interactively with prefix \\[universal-argument] \\[universal-argument])
the file we save in becomes the new default in the current Emacs
session (without affecting the value of `bookmark-default-file'.).
This inserts a new todo item into a category.
With no prefix argument ARG, add the item to the current
-category; with one prefix argument (`C-u'), prompt for a category
-from the current todo file; with two prefix arguments (`C-u
-C-u'), first prompt for a todo file, then a category in that
+category; with one prefix argument (\\[universal-argument]), prompt for a category
+from the current todo file; with two prefix arguments (\\[universal-argument]
+\\[universal-argument]), first prompt for a todo file, then a category in that
file. If a non-existing category is entered, ask whether to add
it to the todo file; if answered affirmatively, add the category
and insert the item there.
The categories can be any of those in the current todo file.
With numerical prefix ARG show at most ARG top priority items
-from each category. With `C-u' as prefix argument show the
+from each category. With \\[universal-argument] as prefix argument show the
numbers of top priority items specified by category in
`todo-top-priorities-overrides', if this has an entry for the file(s);
otherwise show `todo-top-priorities' items per category in the
file(s). With no prefix argument, if a top priorities file for
the current todo file has previously been saved (see
`todo-save-filtered-items-buffer'), visit this file; if there is
-no such file, build the list as with prefix argument `C-u'.
+no such file, build the list as with prefix argument \\[universal-argument].
The prefix ARG regulates how many top priorities from
each category to show, as described above."
a file selection dialog that pops up in this case.
With numerical prefix ARG show at most ARG top priority items
-from each category in each file. With `C-u' as prefix argument
+from each category in each file. With \\[universal-argument] as prefix argument
show the numbers of top priority items specified in
`todo-top-priorities-overrides', if this is non-nil; otherwise show
`todo-top-priorities' items per category. With no prefix
argument, if a top priorities file for the chosen todo files
exists (see `todo-save-filtered-items-buffer'), visit this file;
if there is no such file, do the same as with prefix argument
-`C-u'."
+\\[universal-argument]."
(interactive "P")
(todo-filter-items 'top arg t))
EXTENSION may also be a list of extensions instead of a single one.
Optional MARKER-CHAR is marker to use.
Interactively, ask for EXTENSION.
-Prefixed with one C-u, unmark files instead.
-Prefixed with two C-u's, prompt for MARKER-CHAR and mark files with it."
+Prefixed with one \\[universal-argument], unmark files instead.
+Prefixed with two \\[universal-argument]'s, prompt for MARKER-CHAR and mark files with it."
(interactive (dired--mark-suffix-interactive-spec))
(unless (listp extension)
(setq extension (list extension)))
SUFFIX may also be a list of suffixes instead of a single one.
Optional MARKER-CHAR is marker to use.
Interactively, ask for SUFFIX.
-Prefixed with one C-u, unmark files instead.
-Prefixed with two C-u's, prompt for MARKER-CHAR and mark files with it."
+Prefixed with one \\[universal-argument], unmark files instead.
+Prefixed with two \\[universal-argument]'s, prompt for MARKER-CHAR and mark files with it."
(interactive (dired--mark-suffix-interactive-spec))
(unless (listp suffix)
(setq suffix (list suffix)))
With a nonnumeric prefix arg, create a new session.
-With a numeric prefix arg (as in `C-u 42 M-x eshell RET'), switch
+With a numeric prefix arg (as in `\\[universal-argument] 42 \\[eshell]'), switch
to the session with that number, or create it if it doesn't
already exist.
(defun gnus-group-find-new-groups (&optional arg)
"Search for new groups and add them.
Each new group will be treated with `gnus-subscribe-newsgroup-method'.
-With 1 C-u, use the `ask-server' method to query the server for new
+With 1 \\[universal-argument], use the `ask-server' method to query the server for new
groups.
-With 2 C-u's, use most complete method possible to query the server
+With 2 \\[universal-argument]'s, use most complete method possible to query the server
for new groups, and subscribe the new groups as zombies."
(interactive "p" gnus-group-mode)
(let ((new-groups (gnus-find-new-newsgroups (or arg 1)))
Each new newsgroup will be treated with `gnus-subscribe-newsgroup-method'.
The `-n' option line from .newsrc is respected.
-With 1 C-u, use the `ask-server' method to query the server for new
+With 1 \\[universal-argument], use the `ask-server' method to query the server for new
groups.
-With 2 C-u's, use most complete method possible to query the server
+With 2 \\[universal-argument]'s, use most complete method possible to query the server
for new groups, and subscribe the new groups as zombies."
(interactive "p" gnus-group-mode)
(let* ((gnus-subscribe-newsgroup-method
"Force redisplaying of the current article.
If ARG (the prefix) is a number, show the article with the charset
defined in `gnus-summary-show-article-charset-alist', or the charset
-input.
+input.\\<gnus-summary-mode-map>
If ARG (the prefix) is non-nil and not a number, show the article,
but without running any of the article treatment functions
-article. Normally, the keystroke is `C-u g'. When using `C-u
-C-u g', show the raw article."
+article. Normally, the keystroke is `\\[universal-argument] \\[gnus-summary-show-article]'. When using `\\[universal-argument]
+\\[universal-argument] \\[gnus-summary-show-article]', show the raw article."
(interactive "P" gnus-summary-mode)
(cond
((numberp arg)
(defcustom gnus-secondary-servers nil
"List of NNTP servers that the user can choose between interactively.
To make Gnus query you for a server, you have to give `gnus' a
-non-numeric prefix - `C-u M-x gnus', in short."
+non-numeric prefix - `\\[universal-argument] \\[gnus]', in short."
:group 'gnus-server
:type '(repeat string))
(make-obsolete-variable 'gnus-secondary-servers 'gnus-select-method "24.1")
`6 9 a' inserts 69 `a's into the buffer.
`6 9 \\[autoarg-terminate] \\[autoarg-terminate]' inserts `69' into the buffer and
then invokes the normal binding of \\[autoarg-terminate].
-`C-u \\[autoarg-terminate]' invokes the normal binding of \\[autoarg-terminate] four times.
+`\\[universal-argument] \\[autoarg-terminate]' invokes the normal binding of \\[autoarg-terminate] four times.
\\{autoarg-mode-map}
Called with a numeric prefix argument, use this numeric value as
the duration of the timer in minutes.
-Called with a `C-u' prefix arguments, use `org-timer-default-timer'
+Called with a \\[universal-argument] prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration.
-With two `C-u' prefix arguments, use `org-timer-default-timer'
+With two \\[universal-argument] prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration and automatically
replace any running timer.
By default, the timer duration will be set to the number of
minutes in the Effort property, if any. You can ignore this by
-using three `C-u' prefix arguments."
+using three \\[universal-argument] prefix arguments."
(interactive "P")
(when (and org-timer-start-time
(not org-timer-countdown-timer))
(defvar org-export-dispatch-last-position (make-marker)
"The position where the last export command was created using the dispatcher.
-This marker will be used with `C-u C-c C-e' to make sure export repetition
+This marker will be used with `\\[universal-argument] C-c C-e' to make sure export repetition
uses the same subtree if the previous command was restricted to a subtree.")
;; For compatibility with Org < 8
"Preview directory using ghostview.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
"Print directory using PostScript through ghostscript.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
"Print directory using PostScript printer.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
It depends on `pr-print-using-ghostscript'.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
"Preview buffer using ghostview.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of saving it in a temporary file.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
"Print buffer using PostScript through ghostscript.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
"Print buffer using PostScript printer.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
It depends on `pr-print-using-ghostscript'.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
(defun pr-despool-preview (&optional filename)
"Preview spooled PostScript.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of saving it in a temporary file.
(defun pr-despool-using-ghostscript (&optional filename)
"Print spooled PostScript using ghostscript.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
(defun pr-despool-print (&optional filename)
"Send the spooled PostScript to the printer.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
(defun pr-despool-ps-print (&optional filename)
"Send the spooled PostScript to the printer or use ghostscript to print it.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
"Process a PostScript file IFILENAME and send it to printer.
Interactively, the command prompts for N-UP printing number, for an input
-PostScript file IFILENAME and, when you use a prefix argument (C-u), the
+PostScript file IFILENAME and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for an output PostScript file name OFILENAME, and
saves the PostScript image in that file instead of sending it to the printer.
The command prompts the user for a N-UP value and printing will
immediately be done using the current active printer.
- C-u M-x pr-ps-fast-fire RET
- C-u 0 M-x pr-ps-fast-fire RET
+ \\[universal-argument] \\[pr-ps-fast-fire]
+ \\[universal-argument] 0 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value and also for a current
PostScript printer, then printing will immediately be done using the new
current active printer.
- C-u 1 M-x pr-ps-fast-fire RET
+ \\[universal-argument] 1 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value and also for a file name,
and saves the PostScript image in that file instead of sending it to the
printer.
- C-u 2 M-x pr-ps-fast-fire RET
+ \\[universal-argument] 2 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value, then for a current
PostScript printer and, finally, for a file name. Then change the active
printer to that chosen by user and saves the PostScript image in
`pr-mode-alist' will be used, that is, the current buffer or region will be
printed using `pr-txt-mode'.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a new active text printer.
Noninteractively, the argument SELECT-PRINTER is treated as follows:
8 <=> `function-method-keyword'
9 <=> `class'
-As a special case, the universal argument C-u forces completion of
+As a special case, the universal argument \\[universal-argument] forces completion of
function names in places where the default would be a keyword.
-Two prefix argument, C-u C-u, prompts for a regexp by which to limit
+Two prefix argument, \\[universal-argument] \\[universal-argument], prompts for a regexp by which to limit
completion.
For Lisp programmers only:
When used interactively, insert the proper starting #!-line,
and make the visited file executable via `executable-set-magic',
perhaps querying depending on the value of `executable-query'.
-(If given a prefix (i.e., `C-u') don't insert any starting #!
+(If given a prefix (i.e., `\\[universal-argument]') don't insert any starting #!
line.)
When this function is called noninteractively, INSERT-FLAG (the third
and `search-upper-case' is non-nil, the matching is case-sensitive.
When NLINES is a string or when the function is called
-interactively with prefix argument without a number (`C-u' alone
+interactively with prefix argument without a number (\\[universal-argument] alone
as prefix) the matching strings are collected into the `*Occur*'
buffer by using NLINES as a replacement regexp. NLINES may
contain \\& and \\N which convention follows `replace-match'.
When inserting cells, the formulas are usually relocated to keep the same
relative references to neighboring cells. This is best if the formulas
-generally refer to other cells within the yanked text. You can use the C-u
+generally refer to other cells within the yanked text. You can use the \\[universal-argument]
prefix to specify insertion without relocation, which is best when the
formulas refer to cells outside the yanked text.
When inserting formulas, the text is treated as a string constant if it doesn't
make sense as a sexp or would otherwise be considered a symbol. Use `sym' to
-explicitly insert a symbol, or use the C-u prefix to treat all unmarked words
+explicitly insert a symbol, or use the \\[universal-argument] prefix to treat all unmarked words
as symbols."
(if (not (and (derived-mode-p 'ses-mode)
(eq (get-text-property (point) 'keymap) 'ses-mode-print-map)))
(defcustom set-mark-command-repeat-pop nil
"Non-nil means repeating \\[set-mark-command] after popping mark pops it again.
-That means that C-u \\[set-mark-command] \\[set-mark-command]
+That means that \\[universal-argument] \\[set-mark-command] \\[set-mark-command]
will pop the mark twice, and
-C-u \\[set-mark-command] \\[set-mark-command] \\[set-mark-command]
+\\[universal-argument] \\[set-mark-command] \\[set-mark-command] \\[set-mark-command]
will pop the mark three times.
A value of nil means \\[set-mark-command]'s behavior does not change
-after C-u \\[set-mark-command]."
+after \\[universal-argument] \\[set-mark-command]."
:type 'boolean
:group 'editing-basics)
Non-interactively, arguments BEG and END delimit the region.
Normally it searches forwards, keeping the first instance of
each identical line. If REVERSE is non-nil (interactively, with
-a C-u prefix), it searches backwards and keeps the last instance of
+a \\[universal-argument] prefix), it searches backwards and keeps the last instance of
each repeated line.
Identical lines need not be adjacent, unless the argument
-ADJACENT is non-nil (interactively, with a C-u C-u prefix).
+ADJACENT is non-nil (interactively, with a \\[universal-argument] \\[universal-argument] prefix).
This is a more efficient mode of operation, and may be useful
on large regions that have already been sorted.
If the argument KEEP-BLANKS is non-nil (interactively, with a
-C-u C-u C-u prefix), it retains repeated blank lines.
+\\[universal-argument] \\[universal-argument] \\[universal-argument] prefix), it retains repeated blank lines.
Returns the number of deleted lines. Interactively, or if INTERACTIVE
is non-nil, it also prints a message describing the number of deletions."
To toggle strokes-mode, invoke the command
-> M-x strokes-mode
+> \\[strokes-mode]
** Strokes for controlling the behavior of Emacs...
When you're ready to start defining strokes, just use the command
-> M-x strokes-global-set-stroke
+> \\[strokes-global-set-stroke]
You will see a ` *strokes*' buffer which is waiting for you to enter in
your stroke. When you enter in the stroke, you draw with button 1 or
For now, try to define a stroke to copy a region. This is a popular
edit command, so type
-> M-x strokes-global-set-stroke
+> \\[strokes-global-set-stroke]
Then, in the ` *strokes*' buffer, draw the letter `C' (for `copy')
and then, when it asks you to enter the command to map that to, type
If ever you want to know what a certain strokes maps to, then do
-> M-x strokes-describe-stroke
+> \\[strokes-describe-stroke]
and you can enter in any arbitrary stroke. Remember: The strokes
package lets you program in simple and complex (multi-lift) strokes.
If ever you define a stroke which you don't like, then you can unset
it with the command
-> M-x strokes-unset-last-stroke
+> \\[strokes-unset-last-stroke]
You can always get an idea of what your current strokes look like with
the command
-> M-x strokes-list-strokes
+> \\[strokes-list-strokes]
Your strokes will be displayed in alphabetical order (based on command
names) and the beginning of each simple stroke will be marked by a
`ROYGBIV'. If you want a listing of your strokes from most recent
down, then use a prefix argument:
-> C-u M-x strokes-list-strokes
+> \\[universal-argument] \\[strokes-list-strokes]
Your strokes are stored as you enter them. They get saved into the
file specified by the `strokes-file' variable, along with other strokes
configuration variables. You will be prompted to save them when you
exit Emacs, or you can save them with
-> M-x strokes-prompt-user-save-strokes
+> \\[strokes-prompt-user-save-strokes]
Your strokes get loaded automatically when you enable `strokes-mode'.
You can also load in your user-defined strokes with
-> M-x strokes-load-user-strokes
+> \\[strokes-load-user-strokes]
** Strokes for pictographic editing...
which you can copy, paste, delete, move, etc. When all is done, you
may want to send the file, or save it. This is done with
-> M-x strokes-encode-buffer
+> \\[strokes-encode-buffer]
Likewise, to decode the strokes from a strokes-encoded buffer you do
-> M-x strokes-decode-buffer
+> \\[strokes-decode-buffer]
** A few more important things...
\\[artist-key-set-point] Does one of the following:
For lines/rectangles/squares: sets the first/second endpoint
- For poly-lines: sets a point (use C-u \\[artist-key-set-point] to set last point)
+ For poly-lines: sets a point (use \\[universal-argument] \\[artist-key-set-point] to set last point)
When erase characters: toggles erasing
When cutting/copying: Sets first/last endpoint of rect/square
When pasting: Pastes
FORMAT-KEY can be used to pre-select a citation format.
-When called with a `C-u' prefix, prompt for optional arguments in
+When called with a \\[universal-argument] prefix, prompt for optional arguments in
cite macros. When called with a numeric prefix, make that many
citations. When called with point inside the braces of a `\\cite'
command, it will add another key, ignoring the value of
by the same index entry.
To define additional cross referencing items, use the option
`reftex-view-crossref-extra'. See also `reftex-view-crossref-from-bibtex'.
-With one or two C-u prefixes, enforce rescanning of the document.
+With one or two \\[universal-argument] prefixes, enforce rescanning of the document.
With argument 2, select the window showing the cross reference.
AUTO-HOW is only for the automatic crossref display and is handed through
to the functions `reftex-view-cr-cite' and `reftex-view-cr-ref'."
"Put selection or the word near point into the default index macro.
This uses the information in `reftex-index-default-macro' to make an index
entry. The phrase indexed is the current selection or the word near point.
-When called with one `C-u' prefix, let the user have a chance to edit the
-index entry. When called with 2 `C-u' as prefix, also ask for the index
+When called with one \\[universal-argument] prefix, let the user have a chance to edit the
+index entry. When called with 2 \\[universal-argument] as prefix, also ask for the index
macro and other stuff.
When called inside TeX math mode as determined by the `texmathp.el' library
which is part of AUCTeX, the string is first processed with the
"Display a buffer with an index compiled from the current document.
When the document has multiple indices, first prompts for the correct one.
When index support is turned off, offer to turn it on.
-With one or two `C-u' prefixes, rescan document first.
+With one or two \\[universal-argument] prefixes, rescan document first.
With prefix 2, restrict index to current document section.
With prefix 3, restrict index to region."
label selection menu.
The function returns the selected label or nil.
If NO-INSERT is non-nil, do not insert \\ref command, just return label.
-When called with 2 C-u prefix args, disable magic word recognition."
+When called with 2 \\[universal-argument] prefix args, disable magic word recognition."
(interactive)
(defun reftex-toc (&optional _rebuild reuse)
;; FIXME: Get rid of the `rebuild' argument.
"Show the table of contents for the current document.
-When called with a raw C-u prefix, rescan the document first."
+When called with a raw \\[universal-argument] prefix, rescan the document first."
;; The REUSE argument means, search all visible frames for a window
;; displaying the toc window. If yes, reuse this window.
nil Never prompt for optional arguments
t Always prompt
-maybe Prompt only if `reftex-citation' was called with C-u prefix arg
+maybe Prompt only if `reftex-citation' was called with \\[universal-argument] prefix arg
Unnecessary empty optional arguments are removed before insertion into
the buffer. See `reftex-cite-cleanup-optional-args'."
(defcustom reftex-enable-partial-scans nil
"Non-nil means, re-parse only 1 file when asked to re-parse.
-Re-parsing is normally requested with a `C-u' prefix to many RefTeX commands,
+Re-parsing is normally requested with a \\[universal-argument] prefix to many RefTeX commands,
or with the `r' key in menus. When this option is t in a multifile document,
we will only parse the current buffer, or the file associated with the label
or section heading near point in a menu. Requesting re-parsing of an entire
-multifile document then requires a `C-u C-u' prefix or the capital `R' key
+multifile document then requires a \\[universal-argument] \\[universal-argument] prefix or the capital `R' key
in menus."
:group 'reftex-optimizations-for-large-documents
:type 'boolean)
`texinfo-all-menus-update', which see. Alternatively, invoke
this function with a prefix argument, see below.
-Non-nil, non-numeric argument (C-u prefix, if interactive) means
+Non-nil, non-numeric argument (\\[universal-argument] prefix, if interactive) means
first update all existing menus in the buffer (incorporating
descriptions from pre-existing menus) before it constructs the
-master menu. If the argument is numeric (e.g., \"C-u 2\"),
+master menu. If the argument is numeric (e.g., \"\\[universal-argument] 2\"),
update all existing nodes as well, by calling
`texinfo-update-node' on the entire file. Warning: do NOT
invoke with a numeric argument if your Texinfo file uses @node
`windmove-display-no-select', this function reselects
a previously selected old window.
-If prefix ARG is `C-u', reselect a previously selected old window.
+If prefix ARG is \\[universal-argument], reselect a previously selected old window.
If `windmove-display-no-select' is non-nil, the meaning of
the prefix argument is reversed and it selects the new window.
;;;###autoload
(defun windmove-delete-left (&optional arg)
"Delete the window to the left of the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was to the left of the current one."
(interactive "P")
(windmove-delete-in-direction 'left arg))
;;;###autoload
(defun windmove-delete-up (&optional arg)
"Delete the window above the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was above the current one."
(interactive "P")
(windmove-delete-in-direction 'up arg))
;;;###autoload
(defun windmove-delete-right (&optional arg)
"Delete the window to the right of the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was to the right of the current one."
(interactive "P")
(windmove-delete-in-direction 'right arg))
;;;###autoload
(defun windmove-delete-down (&optional arg)
"Delete the window below the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was below the current one."
(interactive "P")
(windmove-delete-in-direction 'down arg))
`recenter-redisplay' has the special value `tty', then only tty frames
are redrawn.
-Just C-u as prefix means put point in the center of the window
+Just \\[universal-argument] as prefix means put point in the center of the window
and redisplay normally--don't erase and redraw the frame."
(if (functionp recenter-window-group-function)
(funcall recenter-window-group-function arg)
A prefix argument is handled like `recenter':
With numeric prefix ARG, move current line to window-line ARG.
- With plain `C-u', move current line to window center."
+ With plain \\[universal-argument], move current line to window center."
(interactive "P")
(with-selected-window (other-window-for-scrolling)
(recenter-top-bottom arg)
projects / emacs.git / commitdiff