(autoload '5x5-crack "5x5" "\
Attempt to find a solution for 5x5.
-5x5-crack takes the argument BREEDER which should be a function that takes
+`5x5-crack' takes the argument BREEDER which should be a function that takes
two parameters, the first will be a grid vector array that is the current
solution and the second will be the best solution so far. The function
should return a grid vector array that is the new solution.
FUNCTION ::= Name of the function to be advised.
CLASS ::= `before' | `around' | `after' | `activation' | `deactivation'.
NAME ::= Non-nil symbol that names this piece of advice.
-POSITION ::= `first' | `last' | NUMBER. Optional, defaults to `first',
+POSITION ::= `first' | `last' | NUMBER. Optional, defaults to `first',
see also `ad-add-advice'.
ARGLIST ::= An optional argument list to be used for the advised function
instead of the argument list of the original. The first one found in
Mary-Anne (123) 456-7890
Joe (123) 456-7890
-There is no predefined rule to handle this, but you could easily do it
-using a REGEXP like \"(\". Interactively, all you would have to do is
-to mark the region, call `align-regexp' and enter that regular expression.
-
-REGEXP must contain at least one parenthesized subexpression, typically
-whitespace of the form \"\\\\(\\\\s-*\\\\)\". In normal interactive use,
-this is automatically added to the start of your regular expression after
-you enter it. You only need to supply the characters to be lined up, and
-any preceding whitespace is replaced.
-
-If you specify a prefix argument (or use this function non-interactively),
-you must enter the full regular expression, including the subexpression.
-The function also then prompts for which subexpression parenthesis GROUP
-\(default 1) within REGEXP to modify, the amount of SPACING (default
-`align-default-spacing') to use, and whether or not to REPEAT the rule
-throughout the line.
+There is no predefined rule to handle this, but interactively,
+all you would have to do is to mark the region, call `align-regexp'
+and enter \"(\".
+
+REGEXP must contain at least one parenthesized subexpression,
+typically whitespace of the form \"\\\\(\\\\s-*\\\\)\", but in
+interactive use, this is automatically added to the start of your
+regular expression after you enter it. Interactively, you only
+need to supply the characters to be lined up, and any preceding
+whitespace is replaced.
+
+Non-interactively (or if you specify a prefix argument), you must
+enter the full regular expression, including the subexpression.
+Interactively, the function also then prompts for which
+subexpression parenthesis GROUP (default 1) within REGEXP to
+modify, the amount of SPACING (default `align-default-spacing')
+to use, and whether or not to REPEAT the rule throughout the
+line.
See `align-rules-list' for more information about these options.
activated when files are visited with non-nil buffer-specific
file variable `allout-layout'.
-When allout-auto-activation is \"On\" (t), allout mode is
+When `allout-auto-activation' is \"On\" (t), allout mode is
activated in buffers with non-nil `allout-layout', and the
specified layout is applied.
The array MUST reside at the top of the buffer.
TABs are not respected, and may be converted into spaces at any time.
-Setting the variable `array-respect-tabs' to non-nil will prevent TAB conversion,
-but will cause many functions to give errors if they encounter one.
+Setting the variable `array-respect-tabs' to non-nil will prevent
+TAB conversion, but will cause many functions to give errors if
+they encounter one.
Upon entering array mode, you will be prompted for the values of
several variables. Others will be calculated based on the values you
\\[artist-key-set-point] Does one of the following:
For lines/rectangles/squares: sets the first/second endpoint
- For poly-lines: sets a point (use C-u \\[artist-key-set-point] to set last point)
+ For poly-lines: sets a point (use \\[universal-argument] \\[artist-key-set-point] to set last point)
When erase characters: toggles erasing
When cutting/copying: Sets first/last endpoint of rect/square
When pasting: Pastes
;;; Generated autoloads from auth-source.el
(defvar auth-source-cache-expiry 7200 "\
-How many seconds passwords are cached, or nil to disable
-expiring. Overrides `password-cache-expiry' through a
-let-binding.")
+How many seconds passwords are cached, or nil to disable expiring.
+Overrides `password-cache-expiry' through a let-binding.")
(custom-autoload 'auth-source-cache-expiry "auth-source" t)
(autoload 'bat-mode "bat-mode" "\
Major mode for editing DOS/Windows batch files.
-
Start a new script from `bat-template'. Read help pages for DOS commands
with `bat-cmd-help'. Navigate between sections using `imenu'.
Run script using `bat-run' and `bat-run-args'.
recent one.
To yank words from the text of the buffer and use them as part of the
-bookmark name, type C-w while setting a bookmark. Successive C-w's
+bookmark name, type \\<bookmark-minibuffer-read-name-map>\\[bookmark-yank-word] while setting a bookmark. Successive \\[bookmark-yank-word]'s
yank successive words.
-Typing C-u inserts (at the bookmark name prompt) the name of the last
+Typing \\[universal-argument] inserts (at the bookmark name prompt) the name of the last
bookmark used in the document where the new bookmark is being set;
this helps you use a single bookmark name to track progress through a
large document. If there is no prior bookmark for this document, then
-C-u inserts an appropriate name based on the buffer or file.
+\\[universal-argument] inserts an appropriate name based on the buffer or file.
Use \\[bookmark-delete] to remove bookmarks (you give it a name and
it removes only the first instance of a bookmark with that name from
is nil, raise an error.
To yank words from the text of the buffer and use them as part of the
-bookmark name, type C-w while setting a bookmark. Successive C-w's
+bookmark name, type \\<bookmark-minibuffer-read-name-map>\\[bookmark-yank-word] while setting a bookmark. Successive \\[bookmark-yank-word]'s
yank successive words.
-Typing C-u inserts (at the bookmark name prompt) the name of the last
+Typing \\[universal-argument] inserts (at the bookmark name prompt) the name of the last
bookmark used in the document where the new bookmark is being set;
this helps you use a single bookmark name to track progress through a
large document. If there is no prior bookmark for this document, then
-C-u inserts an appropriate name based on the buffer or file.
+\\[universal-argument] inserts an appropriate name based on the buffer or file.
Use \\[bookmark-delete] to remove bookmarks (you give it a name and
it removes only the first instance of a bookmark with that name from
as an argument. If called with two strings, then no prompting is done.
You must pass at least OLD-NAME when calling from Lisp.
-While you are entering the new name, consecutive C-w's insert
+While you are entering the new name, consecutive \\<bookmark-minibuffer-read-name-map>\\[bookmark-yank-word]'s insert
consecutive words from the text of the buffer into the new bookmark
name.
Save currently defined bookmarks in FILE.
FILE defaults to `bookmark-default-file'.
With prefix PARG, query user for a file to save in.
-If MAKE-DEFAULT is non-nil (interactively with prefix C-u C-u)
+If MAKE-DEFAULT is non-nil (interactively with prefix \\[universal-argument] \\[universal-argument])
the file we save in becomes the new default in the current Emacs
session (without affecting the value of `bookmark-default-file'.).
\f
;;;### (autoloads nil "bs" "bs.el" (0 0 0 0))
;;; Generated autoloads from bs.el
-(push (purecopy '(bs 1 17)) package--builtin-versions)
(autoload 'bs-cycle-next "bs" "\
Select next buffer defined by buffer cycling.
Invoke the Calculator in \"visual keypad\" mode.
This is most useful in the X window system.
In this mode, click on the Calc \"buttons\" using the left mouse button.
-Or, position the cursor manually and do M-x calc-keypad-press.
+Or, position the cursor manually and do \\[calc-keypad-press].
\(fn &optional INTERACTIVE)" t nil)
Major mode for editing C code.
To submit a problem report, enter `\\[c-submit-bug-report]' from a
-c-mode buffer. This automatically sets up a mail buffer with version
+`c-mode' buffer. This automatically sets up a mail buffer with version
information already added. You just need to add a description of the
problem, including a reproducible test case, and send the message.
(autoload 'objc-mode "cc-mode" "\
Major mode for editing Objective C code.
To submit a problem report, enter `\\[c-submit-bug-report]' from an
-objc-mode buffer. This automatically sets up a mail buffer with
+`objc-mode' buffer. This automatically sets up a mail buffer with
version information already added. You just need to add a description
of the problem, including a reproducible test case, and send the
message.
(autoload 'java-mode "cc-mode" "\
Major mode for editing Java code.
To submit a problem report, enter `\\[c-submit-bug-report]' from a
-java-mode buffer. This automatically sets up a mail buffer with
+`java-mode' buffer. This automatically sets up a mail buffer with
version information already added. You just need to add a description
of the problem, including a reproducible test case, and send the
message.
(autoload 'idl-mode "cc-mode" "\
Major mode for editing CORBA's IDL, PSDL and CIDL code.
To submit a problem report, enter `\\[c-submit-bug-report]' from an
-idl-mode buffer. This automatically sets up a mail buffer with
+`idl-mode' buffer. This automatically sets up a mail buffer with
version information already added. You just need to add a description
of the problem, including a reproducible test case, and send the
message.
(autoload 'pike-mode "cc-mode" "\
Major mode for editing Pike code.
To submit a problem report, enter `\\[c-submit-bug-report]' from a
-pike-mode buffer. This automatically sets up a mail buffer with
+`pike-mode' buffer. This automatically sets up a mail buffer with
version information already added. You just need to add a description
of the problem, including a reproducible test case, and send the
message.
(autoload 'awk-mode "cc-mode" "\
Major mode for editing AWK code.
To submit a problem report, enter `\\[c-submit-bug-report]' from an
-awk-mode buffer. This automatically sets up a mail buffer with version
+`awk-mode' buffer. This automatically sets up a mail buffer with version
information already added. You just need to add a description of the
problem, including a reproducible test case, and send the message.
\(fn STYLENAME &optional DONT-OVERRIDE)" t nil)
(autoload 'c-add-style "cc-styles" "\
-Adds a style to `c-style-alist', or updates an existing one.
+Add a style to `c-style-alist', or update an existing one.
STYLE is a string identifying the style to add or update. DESCRIPTION
is an association list describing the style and must be of the form:
(autoload 'checkdoc "checkdoc" "\
Interactively check the entire buffer for style errors.
The current status of the check will be displayed in a buffer which
-the users will view as each check is completed." t nil)
+the users will view as each check is completed." '(emacs-lisp-mode) nil)
(autoload 'checkdoc-interactive "checkdoc" "\
Interactively check the current buffer for doc string errors.
Optional argument SHOWSTATUS indicates that we should update the
checkdoc status window instead of the usual behavior.
-\(fn &optional START-HERE SHOWSTATUS)" t nil)
+\(fn &optional START-HERE SHOWSTATUS)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-message-interactive "checkdoc" "\
Interactively check the current buffer for message string errors.
Optional argument SHOWSTATUS indicates that we should update the
checkdoc status window instead of the usual behavior.
-\(fn &optional START-HERE SHOWSTATUS)" t nil)
+\(fn &optional START-HERE SHOWSTATUS)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-eval-current-buffer "checkdoc" "\
Evaluate and check documentation for the current buffer.
store all errors found in a warnings buffer,
otherwise stop after the first error.
-\(fn &optional TAKE-NOTES)" t nil)
+\(fn &optional TAKE-NOTES)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-file "checkdoc" "\
Check FILE for document, comment, error style, and rogue spaces.
Prefix argument TAKE-NOTES means to collect all the warning messages into
a separate buffer.
-\(fn &optional TAKE-NOTES)" t nil)
+\(fn &optional TAKE-NOTES)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-continue "checkdoc" "\
Find the next doc string in the current buffer which has a style error.
Prefix argument TAKE-NOTES means to continue through the whole
buffer and save warnings in a separate buffer.
-\(fn &optional TAKE-NOTES)" t nil)
+\(fn &optional TAKE-NOTES)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-comments "checkdoc" "\
Find missing comment sections in the current Emacs Lisp file.
separate buffer. Otherwise print a message. This returns the error
if there is one.
-\(fn &optional TAKE-NOTES)" t nil)
+\(fn &optional TAKE-NOTES)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-rogue-spaces "checkdoc" "\
Find extra spaces at the end of lines in the current file.
if there is one.
Optional argument INTERACT permits more interactive fixing.
-\(fn &optional TAKE-NOTES INTERACT)" t nil)
+\(fn &optional TAKE-NOTES INTERACT)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-message-text "checkdoc" "\
Scan the buffer for occurrences of the error function, and verify text.
Optional argument TAKE-NOTES causes all errors to be logged.
-\(fn &optional TAKE-NOTES)" t nil)
+\(fn &optional TAKE-NOTES)" '(emacs-lisp-mode) nil)
(autoload 'checkdoc-eval-defun "checkdoc" "\
Evaluate the current form with `eval-defun' and check its documentation.
\(fn NAME PREFIX &optional FIRST)" nil nil)
(autoload 'comp-clean-up-stale-eln "comp" "\
-Given FILE remove all its *.eln files in `native-comp-eln-load-path'
-sharing the original source filename (including FILE).
+Remove all FILE*.eln* files found in `native-comp-eln-load-path'.
+The files to be removed are those produced from the original source
+filename (including FILE).
\(fn FILE)" nil nil)
\(fn FUNCTION-OR-FILE &optional OUTPUT)" nil nil)
(autoload 'batch-native-compile "comp" "\
-Perform native compilation on remaining command-line arguments.
-Use this from the command line, with ‘-batch’;
-it won’t work in an interactive Emacs.
-Native compilation equivalent to `batch-byte-compile'." nil nil)
+Perform batch native compilation of remaining command-line arguments.
+
+Native compilation equivalent of `batch-byte-compile'.
+Use this from the command line, with `-batch'; it won't work
+in an interactive Emacs session.
+Optional argument FOR-TARBALL non-nil means the file being compiled
+as part of building the source tarball, in which case the .eln file
+will be placed under the native-lisp/ directory (actually, in the
+last directory in `native-comp-eln-load-path').
+
+\(fn &optional FOR-TARBALL)" nil nil)
(autoload 'batch-byte+native-compile "comp" "\
Like `batch-native-compile', but used for bootstrap.
the mark is pushed twice in that buffer:
first in the other window, then in the selected window.
-A prefix arg means reverse the value of variable
+A prefix arg IGNORE-WHITESPACE, means reverse the value of variable
`compare-ignore-whitespace'. If `compare-ignore-whitespace' is
nil, then a prefix arg means ignore changes in whitespace. If
`compare-ignore-whitespace' is non-nil, then a prefix arg means
\(fn PHRASE-FILE &optional COUNT STARTMSG ENDMSG)" nil nil)
(autoload 'cookie-snarf "cookie1" "\
-Reads in the PHRASE-FILE, returns it as a vector of strings.
-Emit STARTMSG and ENDMSG before and after. Caches the result; second
+Read the PHRASE-FILE, return it as a vector of strings.
+Emit STARTMSG and ENDMSG before and after. Cache the result; second
and subsequent calls on the same file won't go to disk.
\(fn PHRASE-FILE &optional STARTMSG ENDMSG)" nil nil)
\\{cperl-mode-map}
-Setting the variable `cperl-font-lock' to t switches on font-lock-mode
+Setting the variable `cperl-font-lock' to t switches on `font-lock-mode'
\(even with older Emacsen), `cperl-electric-lbrace-space' to t switches
on electric space between $ and {, `cperl-electric-parens-string' is
the string that contains parentheses that should be electric in CPerl
These variables control the look of expanded templates.
dcl-imenu-generic-expression
- Default value for imenu-generic-expression. The default includes
+ Default value for `imenu-generic-expression'. The default includes
SUBROUTINE labels in the main listing and sub-listings for
other labels, CALL, GOTO and GOSUB statements.
(autoload 'cancel-debug-on-entry "debug" "\
Undo effect of \\[debug-on-entry] on FUNCTION.
-If FUNCTION is nil, cancel debug-on-entry for all functions.
+If FUNCTION is nil, cancel `debug-on-entry' for all functions.
When called interactively, prompt for FUNCTION in the minibuffer.
To specify a nil argument interactively, exit with an empty minibuffer.
(autoload 'cancel-debug-on-variable-change "debug" "\
Undo effect of \\[debug-on-variable-change] on VARIABLE.
-If VARIABLE is nil, cancel debug-on-variable-change for all variables.
+If VARIABLE is nil, cancel `debug-on-variable-change' for all variables.
When called interactively, prompt for VARIABLE in the minibuffer.
To specify a nil argument interactively, exit with an empty minibuffer.
`delimit-columns-before', `delimit-columns-after',
`delimit-columns-separator', `delimit-columns-format' and
`delimit-columns-extra' variables for customization of the
-look.
+look.
\(fn START END)" t nil)
CHILD: the name of the command for the derived mode.
PARENT: the name of the command for the parent mode (e.g. `text-mode')
or nil if there is no parent.
-NAME: a string which will appear in the status line (e.g. \"Hypertext\")
+NAME: a string that will appear in the mode line (e.g. \"HTML\")
DOCSTRING: an optional documentation string--if you do not supply one,
the function will attempt to invent something useful.
KEYWORD-ARGS:
A nil value means to simply use the same abbrev-table
as the parent.
:after-hook FORM
- A single lisp form which is evaluated after the mode
+ A single Lisp form which is evaluated after the mode
hooks have been run. It should not be quoted.
:interactive BOOLEAN
Whether the derived mode should be `interactive' or not.
Note that if the documentation string had been left out, it would have
been generated automatically, with a reference to the keymap.
-The new mode runs the hook constructed by the function
-`derived-mode-hook-name'.
+The new mode runs the hook named MODE-hook. For `foo-mode',
+the hook will be named `foo-mode-hook'.
See Info node `(elisp)Derived Modes' for more details.
\(fn &optional ARG)" t nil)
(autoload 'global-dictionary-tooltip-mode "dictionary" "\
-Enable/disable dictionary-tooltip-mode for all buffers.
+Enable/disable `dictionary-tooltip-mode' for all buffers.
-Internally it provides a default for the dictionary-tooltip-mode.
-It can be overwritten for each buffer using dictionary-tooltip-mode.
+Internally it provides a default for the `dictionary-tooltip-mode'.
+It can be overwritten for each buffer using `dictionary-tooltip-mode'.
Note: (global-dictionary-tooltip-mode 0) will not disable the mode
any buffer where (dictionary-tooltip-mode 1) has been called.
\(fn &optional ARG)" t nil)
+(autoload 'context-menu-dictionary "dictionary" "\
+Populate MENU with dictionary commands at CLICK.
+When you add this function to `context-menu-functions',
+the context menu will contain an item that searches
+the word at mouse click.
+
+\(fn MENU CLICK)" nil nil)
+
(register-definition-prefixes "dictionary" '("dictionary-" "global-dictionary-tooltip-mode"))
;;;***
name, and the default for OLD is a backup file for NEW, if one
exists. If NO-ASYNC is non-nil, call diff synchronously.
-When called interactively with a prefix argument, prompt
+When called interactively with a prefix argument SWITCHES, prompt
interactively for diff switches. Otherwise, the switches
-specified in the variable `diff-switches' are passed to the
-diff command.
+specified in the variable `diff-switches' are passed to the diff
+command.
Non-interactively, OLD and NEW may each be a file or a buffer.
Uses the latest backup, if there are several numerical backups.
If this file is a backup, diff it with its original.
The backup file is the first file given to `diff'.
-With prefix arg, prompt for diff switches.
+With prefix arg SWITCHES, prompt for diff switches.
\(fn FILE &optional SWITCHES)" t nil)
(autoload 'diff-latest-backup-file "diff" "\
-Return the latest existing backup of FILE, or nil.
+Return the latest existing backup of file FN, or nil.
\(fn FN)" nil nil)
normal diffs.
When the buffer is read-only, the ESC prefix is not necessary.
-If you edit the buffer manually, diff-mode will try to update the hunk
+If you edit the buffer manually, `diff-mode' will try to update the hunk
headers for you on-the-fly.
You can also switch between context diff and unified diff with \\[diff-context->unified],
(define-key ctl-x-4-map "d" 'dired-other-window)
(autoload 'dired-other-window "dired" "\
-\"Edit\" directory DIRNAME. Like `dired' but selects in another window.
+\"Edit\" directory DIRNAME. Like `dired' but select in another window.
\(fn DIRNAME &optional SWITCHES)" t nil)
(define-key ctl-x-5-map "d" 'dired-other-frame)
(autoload 'dired-other-frame "dired" "\
-\"Edit\" directory DIRNAME. Like `dired' but makes a new frame.
+\"Edit\" directory DIRNAME. Like `dired' but make a new frame.
\(fn DIRNAME &optional SWITCHES)" t nil)
(define-key tab-prefix-map "d" 'dired-other-tab)
(autoload 'dired-other-tab "dired" "\
-\"Edit\" directory DIRNAME. Like `dired' but makes a new tab.
+\"Edit\" directory DIRNAME. Like `dired' but make a new tab.
\(fn DIRNAME &optional SWITCHES)" t nil)
(autoload 'dired-noselect "dired" "\
-Like `dired' but returns the Dired buffer as value, does not select it.
+Like `dired' but return the Dired buffer as value, do not select it.
\(fn DIR-OR-LIST &optional SWITCHES)" nil nil)
;;; Generated autoloads from display-fill-column-indicator.el
(autoload 'display-fill-column-indicator-mode "display-fill-column-indicator" "\
-Toggle display of fill-column indicator.
+Toggle display of `fill-column' indicator.
This uses `display-fill-column-indicator' internally.
This is a minor mode. If called interactively, toggle the
See `display-fill-column-indicator-mode' for more information on
Display-Fill-Column-Indicator mode.
-`global-display-fill-column-indicator-modes' is used to control
-which modes this minor mode is used in.
+`global-display-fill-column-indicator-modes' is used to control which
+modes this minor mode is used in.
\(fn &optional ARG)" t nil)
It is executed after toggling the mode, and before running MODE-hook.
Before the actual body code, you can write keyword arguments, i.e.
alternating keywords and values. If you provide BODY, then you must
- provide at least one keyword argument (e.g. `:lighter nil').
+ provide at least one keyword argument (e.g. `:lighter nil`).
The following special keywords are supported (other keywords are passed
to `defcustom' if the minor mode is global):
Not used if you also specify :variable.
:lighter SPEC Text displayed in the mode line when the mode is on.
:keymap MAP Keymap bound to the mode keymap. Defaults to `MODE-map'.
- If non-nil, it should be a variable name (whose value is
- a keymap), or an expression that returns either a keymap or
+ If non-nil, it should be an unquoted variable name (whose value
+ is a keymap), or an expression that returns either a keymap or
a list of (KEY . BINDING) pairs where KEY and BINDING are
suitable for `define-key'. If you supply a KEYMAP argument
that is not a symbol, this macro defines the variable MODE-map
be assigned to PLACE. If you specify a :variable, this function
does not define a MODE variable (nor any of the terms used
in :variable).
-:after-hook A single lisp form which is evaluated after the mode hooks
+:after-hook A single Lisp form which is evaluated after the mode hooks
have been run. It should not be quoted.
For example, you could write
(defalias 'ebuffers3 #'ediff-buffers3)
(autoload 'ediff-directories "ediff" "\
-Run Ediff on a pair of directories, DIR1 and DIR2, comparing files that have
-the same name in both. The third argument, REGEXP, is nil or a regular
-expression; only file names that match the regexp are considered.
+Run Ediff on directories DIR1 and DIR2, comparing files.
+Consider only files that have the same name in both directories.
+
+REGEXP is nil or a regular expression; only file names that match
+the regexp are considered.
\(fn DIR1 DIR2 REGEXP)" t nil)
(defalias 'edir-revisions #'ediff-directory-revisions)
(autoload 'ediff-directories3 "ediff" "\
-Run Ediff on three directories, DIR1, DIR2, and DIR3, comparing files that
-have the same name in all three. The last argument, REGEXP, is nil or a
-regular expression; only file names that match the regexp are considered.
+Run Ediff on directories DIR1, DIR2, and DIR3, comparing files.
+Consider only files that have the same name in all three directories.
+
+REGEXP is nil or a regular expression; only file names that match
+the regexp are considered.
\(fn DIR1 DIR2 DIR3 REGEXP)" t nil)
(defalias 'edirs-merge #'ediff-merge-directories)
(autoload 'ediff-merge-directories-with-ancestor "ediff" "\
-Merge files in directories DIR1 and DIR2 using files in ANCESTOR-DIR as ancestors.
+Merge files in DIR1 and DIR2 using files in ANCESTOR-DIR as ancestors.
Ediff merges files that have identical names in DIR1, DIR2. If a pair of files
in DIR1 and DIR2 doesn't have an ancestor in ANCESTOR-DIR, Ediff will merge
without ancestor. The fourth argument, REGEXP, is nil or a regular expression;
(defalias 'edir-merge-revisions #'ediff-merge-directory-revisions)
(autoload 'ediff-merge-directory-revisions-with-ancestor "ediff" "\
-Run Ediff on a directory, DIR1, merging its files with their revisions and ancestors.
+Run Ediff on DIR1 and merge its files with their revisions and ancestors.
The second argument, REGEXP, is a regular expression that filters the file
names. Only the files that are under revision control are taken into account.
MERGE-AUTOSTORE-DIR is the directory in which to store merged files.
Call `ediff-merge-files' with the next two command line arguments." nil nil)
(autoload 'ediff-merge-with-ancestor-command "ediff" "\
-Call `ediff-merge-files-with-ancestor' with the next three command line arguments." nil nil)
+Call `ediff-merge-files-with-ancestor' with next three command line arguments." nil nil)
(autoload 'ediff-directories-command "ediff" "\
Call `ediff-directories' with the next three command line arguments." nil nil)
Call `ediff-merge-directories' with the next three command line arguments." nil nil)
(autoload 'ediff-merge-directories-with-ancestor-command "ediff" "\
-Call `ediff-merge-directories-with-ancestor' with the next four command line arguments." nil nil)
+Call `ediff-merge-directories-with-ancestor' with the next four command line
+arguments." nil nil)
(register-definition-prefixes "ediff" '("ediff-"))
;;; Generated autoloads from vc/emerge.el
(autoload 'emerge-files "emerge" "\
-Run Emerge on two files.
+Run Emerge on two files FILE-A and FILE-B.
\(fn ARG FILE-A FILE-B FILE-OUT &optional STARTUP-HOOKS QUIT-HOOKS)" t nil)
\(fn ARG FILE-A FILE-B FILE-ANCESTOR FILE-OUT &optional STARTUP-HOOKS QUIT-HOOKS)" t nil)
(autoload 'emerge-buffers "emerge" "\
-Run Emerge on two buffers.
+Run Emerge on two buffers BUFFER-A and BUFFER-B.
\(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS QUIT-HOOKS)" t nil)
(autoload 'epa-select-keys "epa" "\
Display a user's keyring and ask him to select keys.
-CONTEXT is an epg-context.
+CONTEXT is an `epg-context'.
PROMPT is a string to prompt with.
NAMES is a list of strings to be matched with keys. If it is nil, all
the keys are listed.
(function-put 'epa-verify-region 'interactive-only 't)
(autoload 'epa-verify-cleartext-in-region "epa" "\
-Verify OpenPGP cleartext signed messages in the current region
-between START and END.
+Verify OpenPGP cleartext signed messages in current region from START to END.
Don't use this command in Lisp programs!
See the reason described in the `epa-verify-region' documentation.
\(fn START END)" t nil)
(autoload 'epa-import-armor-in-region "epa" "\
-Import keys in the OpenPGP armor format in the current region
-between START and END.
+Import keys in the OpenPGP armor format in the current region from START to END.
\(fn START END)" t nil)
element is the certificate file name itself, or t, which means
that `auth-source' will be queried for the key and the
certificate. Authenticating using a TLS client certificate is
-also refered to as \"CertFP\" (Certificate Fingerprint)
+also referred to as \"CertFP\" (Certificate Fingerprint)
authentication by various IRC networks.
Example usage:
With a nonnumeric prefix arg, create a new session.
-With a numeric prefix arg (as in `C-u 42 M-x eshell RET'), switch
+With a numeric prefix arg (as in `\\[universal-argument] 42 \\[eshell]'), switch
to the session with that number, or create it if it doesn't
already exist.
(autoload 'etags--xref-backend "etags" nil nil nil)
-(register-definition-prefixes "etags" '("default-tags-table-function" "etags-" "file-of-tag" "find-tag-" "goto-tag-location-function" "initialize-new-tags-table" "last-tag" "list-tags-function" "select-tags-table-" "snarf-tag-function" "tag" "verify-tags-table-function" "xref-"))
+(register-definition-prefixes "etags" '("default-tags-table-function" "etags-" "file-of-tag" "find-tag-" "goto-tag-location-function" "initialize-new-tags-table" "last-tag" "list-tags-function" "select-tags-table-" "snarf-tag-function" "tag" "verify-tags-table-function"))
+
+;;;***
+\f
+;;;### (autoloads nil "etc-authors-mode" "textmodes/etc-authors-mode.el"
+;;;;;; (0 0 0 0))
+;;; Generated autoloads from textmodes/etc-authors-mode.el
+
+(autoload 'etc-authors-mode "etc-authors-mode" "\
+Major mode for viewing \"etc/AUTHORS\" from the Emacs distribution.
+Provides some basic font locking and not much else.
+
+\(fn)" t nil)
+
+(register-definition-prefixes "etc-authors-mode" '("etc-authors-"))
;;;***
\f
Query the directory server, and return the matching responses.
The variable `eudc-inline-query-format' controls how to associate the
individual QUERY-WORDS with directory attribute names.
-After querying the server for the given string, the expansion specified by
-`eudc-inline-expansion-format' is applied to the matches before returning them.inserted in the buffer at point.
+After querying the server for the given string, the expansion
+specified by `eudc-inline-expansion-format' is applied to the
+matches before returning them.inserted in the buffer at point.
Multiple servers can be tried with the same query until one finds a match,
see `eudc-inline-expansion-servers'.
(autoload 'eww-mode "eww" "\
Mode for browsing the web.
+\\{eww-mode-map}
+
\(fn)" t nil)
(autoload 'eww-browse-url "eww" "\
(autoload 'eww-list-bookmarks "eww" "\
Display the bookmarks." t nil)
+(autoload 'eww-bookmark-jump "eww" "\
+Default bookmark handler for EWW buffers.
+
+\(fn BOOKMARK)" nil nil)
+
(register-definition-prefixes "eww" '("erc--download-directory" "eww-"))
;;;***
INC may be passed as a numeric prefix argument.
The actual adjustment made depends on the final component of the
-key-binding used to invoke the command, with all modifiers removed:
+keybinding used to invoke the command, with all modifiers removed:
+, = Increase the height of the default face by one step
- Decrease the height of the default face by one step
colors to display. Otherwise, this command computes a list of
colors that the current display can handle. Customize
`list-colors-sort' to change the order in which colors are shown.
-Type `g' or \\[revert-buffer] after customizing `list-colors-sort'
-to redisplay colors in the new order.
+Type \\<help-mode-map>\\[revert-buffer] after customizing `list-colors-sort' to redisplay colors in
+the new order.
-If the optional argument BUFFER-NAME is nil, it defaults to *Colors*.
+If the optional argument BUFFER-NAME is nil, it defaults to \"*Colors*\".
If the optional argument CALLBACK is non-nil, it should be a
function to call each time the user types RET or clicks on a
\(fn DIR ARGS)" t nil)
(autoload 'find-name-dired "find-dired" "\
-Search DIR recursively for files matching the globbing pattern PATTERN,
+Search DIR recursively for files matching the globbing PATTERN,
and run Dired on those files.
PATTERN is a shell wildcard (not an Emacs regexp) and need not be quoted.
The default command run (after changing into DIR) is
Interactively, prompt for LIBRARY using the one at or near point.
+This function searches `find-library-source-path' if non-nil, and
+`load-path' otherwise.
+
\(fn LIBRARY)" t nil)
(autoload 'read-library-name "find-func" "\
Read and return a library name, defaulting to the one near point.
A library name is the filename of an Emacs Lisp library located
-in a directory under `load-path' (or `find-function-source-path',
+in a directory under `load-path' (or `find-library-source-path',
if non-nil)." nil nil)
(autoload 'find-library-other-window "find-func" "\
attempts to find it in the Emacs C sources; however, if LISP-ONLY
is non-nil, signal an error instead.
-If the file where FUNCTION is defined is not known, then it is
-searched for in `find-function-source-path' if non-nil, otherwise
-in `load-path'.
-
\(fn FUNCTION &optional LISP-ONLY)" nil nil)
(autoload 'find-function "find-func" "\
places point before the definition.
Set mark before moving, if the buffer already existed.
-The library where FUNCTION is defined is searched for in
-`find-function-source-path', if non-nil, otherwise in `load-path'.
See also `find-function-recenter-line' and `find-function-after-hook'.
\(fn FUNCTION)" t nil)
the point of the definition. The buffer is not selected.
If the variable's definition can't be found in the buffer, return (BUFFER).
-The library where VARIABLE is defined is searched for in FILE or
-`find-function-source-path', if non-nil, otherwise in `load-path'.
-
\(fn VARIABLE &optional FILE)" nil nil)
(autoload 'find-variable "find-func" "\
Set mark before moving, if the buffer already existed.
-The library where VARIABLE is defined is searched for in
-`find-function-source-path', if non-nil, otherwise in `load-path'.
See also `find-function-recenter-line' and `find-function-after-hook'.
\(fn VARIABLE)" t nil)
variable, `defface' for a face. This function does not switch to the
buffer nor display it.
-The library where SYMBOL is defined is searched for in FILE or
-`find-function-source-path', if non-nil, otherwise in `load-path'.
-
\(fn SYMBOL TYPE &optional FILE)" nil nil)
(autoload 'find-face-definition "find-func" "\
Set mark before moving, if the buffer already existed.
-The library where FACE is defined is searched for in
-`find-function-source-path', if non-nil, otherwise in `load-path'.
See also `find-function-recenter-line' and `find-function-after-hook'.
\(fn FACE)" t nil)
Find directly the variable at point in the other window." t nil)
(autoload 'find-function-setup-keys "find-func" "\
-Define some key bindings for the find-function family of functions." nil nil)
+Define some key bindings for the `find-function' family of functions." nil nil)
(register-definition-prefixes "find-func" '("find-"))
\f
;;;### (autoloads nil "flymake" "progmodes/flymake.el" (0 0 0 0))
;;; Generated autoloads from progmodes/flymake.el
-(push (purecopy '(flymake 1 1 1)) package--builtin-versions)
+(push (purecopy '(flymake 1 2 1)) package--builtin-versions)
(autoload 'flymake-log "flymake" "\
Log, at level LEVEL, the message MSG formatted with ARGS.
\(fn LEVEL MSG &rest ARGS)" nil t)
(autoload 'flymake-make-diagnostic "flymake" "\
-Make a Flymake diagnostic for BUFFER's region from BEG to END.
+Make a Flymake diagnostic for LOCUS's region from BEG to END.
+LOCUS is a buffer object or a string designating a file name.
+
TYPE is a diagnostic symbol and TEXT is string describing the
problem detected in this region. DATA is any object that the
caller wishes to attach to the created diagnostic for later
-retrieval.
+retrieval with `flymake-diagnostic-data'.
+
+If LOCUS is a buffer BEG and END should be buffer positions
+inside it. If LOCUS designates a file, BEG and END should be a
+cons (LINE . COL) indicating a file position. In this second
+case, END may be ommited in which case the region is computed
+using `flymake-diag-region' if the diagnostic is appended to an
+actual buffer.
OVERLAY-PROPERTIES is an alist of properties attached to the
created diagnostic, overriding the default properties and any
-properties of `flymake-overlay-control' of the diagnostic's
-type.
+properties listed in the `flymake-overlay-control' property of
+the diagnostic's type symbol.
-\(fn BUFFER BEG END TYPE TEXT &optional DATA OVERLAY-PROPERTIES)" nil nil)
+\(fn LOCUS BEG END TYPE TEXT &optional DATA OVERLAY-PROPERTIES)" nil nil)
(autoload 'flymake-diagnostics "flymake" "\
Get Flymake diagnostics in region determined by BEG and END.
-If neither BEG or END is supplied, use the whole buffer,
+If neither BEG or END is supplied, use whole accessible buffer,
otherwise if BEG is non-nil and END is nil, consider only
diagnostics at BEG.
`fortran-comment-line-extra-indent'
Amount of extra indentation for text in full-line comments (default 0).
`fortran-comment-indent-style'
- How to indent the text in full-line comments. Allowed values are:
+ How to indent the text in full-line comments. Allowed values are:
nil don't change the indentation
`fixed' indent to `fortran-comment-line-extra-indent' beyond the
value of either
- a list (LEFT TOP WIDTH HEIGHT), describing the workarea.
It must return non-nil to force the frame onscreen, nil otherwise.
-CLEANUP-FRAMES allows \"cleaning up\" the frame list after restoring a frameset:
+CLEANUP-FRAMES allows \"cleaning up\" the frame list after
+restoring a frameset:
t Delete all frames that were not created or restored upon.
nil Keep all frames.
FUNC A function called with two arguments:
for your debugger.
If COMMAND-LINE requests that gdb attaches to a process PID, gdb
will run in *gud-PID*, otherwise it will run in *gud*; in these
-cases the initial working directory is the default-directory of
+cases the initial working directory is the `default-directory' of
the buffer in which this command was invoked.
COMMAND-LINE should include \"-i=mi\" to use gdb's MI text interface.
The gnus-agentize function is now called internally by gnus when
gnus-agent is set. If you wish to avoid calling gnus-agentize,
-customize gnus-agent to nil.
+customize `gnus-agent' to nil.
This will modify the `gnus-setup-news-hook', and
`message-send-mail-real-function' variables, and install the Gnus agent
;;; Generated autoloads from gnus/gnus-dired.el
(autoload 'turn-on-gnus-dired-mode "gnus-dired" "\
-Convenience method to turn on gnus-dired-mode." t nil)
+Convenience method to turn on `gnus-dired-mode'." t nil)
(register-definition-prefixes "gnus-dired" '("gnus-dired-"))
;;; Generated autoloads from gnus/gnus-fun.el
(autoload 'gnus--random-face-with-type "gnus-fun" "\
-Return file from DIR with extension EXT, omitting matches of OMIT, processed by FUN.
+Return file from DIR with extension EXT.
+Omit matches of OMIT, and process them by FUN.
\(fn DIR EXT OMIT FUN)" nil nil)
\(fn &optional AUTO-UPDATE CATCH-ALL)" t nil)
(autoload 'gnus-group-split-update "gnus-mlspl" "\
-Computes nnmail-split-fancy from group params and CATCH-ALL.
+Computes `nnmail-split-fancy' from group params and CATCH-ALL.
It does this by calling (gnus-group-split-fancy nil nil CATCH-ALL).
If CATCH-ALL is nil, `gnus-group-split-default-catch-all-group' is used
History list for grep.")
(defvar grep-find-history nil "\
-History list for grep-find.")
+History list for `grep-find'.")
(autoload 'grep-process-setup "grep" "\
Setup compilation variables and buffer for `grep'.
for your debugger.
If COMMAND-LINE requests that gdb attaches to a process PID, gdb
will run in *gud-PID*, otherwise it will run in *gud*; in these
-cases the initial working directory is the default-directory of
+cases the initial working directory is the `default-directory' of
the buffer in which this command was invoked.
\(fn COMMAND-LINE)" t nil)
;;; Generated autoloads from play/handwrite.el
(autoload 'handwrite "handwrite" "\
-Turns the buffer into a \"handwritten\" document.
+Turn the buffer into a \"handwritten\" document.
The functions `handwrite-10pt', `handwrite-11pt', `handwrite-12pt'
and `handwrite-13pt' set up for various sizes of output.
Repent before ring 31 moves." t nil)
(autoload 'hanoi-unix-64 "hanoi" "\
-Like hanoi-unix, but pretend to have a 64-bit clock.
+Like `hanoi-unix', but pretend to have a 64-bit clock.
This is, necessarily (as of Emacs 20.3), a crock. When the
-current-time interface is made s2G-compliant, hanoi.el will need
+`current-time' interface is made s2G-compliant, hanoi.el will need
to be updated." t nil)
(register-definition-prefixes "hanoi" '("hanoi-"))
(autoload 'describe-function "help-fns" "\
Display the full documentation of FUNCTION (a symbol).
-When called from lisp, FUNCTION may also be a function object.
+When called from Lisp, FUNCTION may also be a function object.
+
+See the `help-enable-symbol-autoload' variable for special
+handling of autoloaded functions.
\(fn FUNCTION)" t nil)
(autoload 'describe-command "help-fns" "\
Display the full documentation of COMMAND (a symbol).
-When called from lisp, COMMAND may also be a function object.
+When called from Lisp, COMMAND may also be a function object.
\(fn COMMAND)" t nil)
When hi-lock is started and if the mode is not excluded or patterns
rejected, the beginning of the buffer is searched for lines of the
form:
- Hi-lock: FOO
+ Hi-lock: (FOO ...)
-where FOO is a list of patterns. The patterns must start before
+where (FOO ...) is a list of patterns. The patterns must start before
position (number of characters into buffer)
`hi-lock-file-patterns-range'. Patterns will be read until
Hi-lock: end is found. A mode is excluded if it's in the list
Highlight-Changes mode is enabled in all buffers where
`highlight-changes-mode-turn-on' would do it.
-See `highlight-changes-mode' for more information on
-Highlight-Changes mode.
+See `highlight-changes-mode' for more information on Highlight-Changes
+mode.
\(fn &optional ARG)" t nil)
Info documentation for this package is available. Use
\\[idlwave-info] to display (complain to your sysadmin if that does
not work). For Postscript, PDF, and HTML versions of the
- documentation, check IDLWAVE's homepage at URL
+ documentation, check IDLWAVE's website at URL
`https://github.com/jdtsmith/idlwave'.
IDLWAVE has customize support - see the group `idlwave'.
For details of keybindings, see `ido-find-file'." t nil)
(autoload 'ido-dired-other-window "ido" "\
-\"Edit\" a directory. Like `ido-dired' but selects in another window.
+\"Edit\" a directory. Like `ido-dired' but select in another window.
The directory is selected interactively by typing a substring.
For details of keybindings, see `ido-find-file'." t nil)
(autoload 'ido-dired-other-frame "ido" "\
-\"Edit\" a directory. Like `ido-dired' but makes a new frame.
+\"Edit\" a directory. Like `ido-dired' but make a new frame.
The directory is selected interactively by typing a substring.
For details of keybindings, see `ido-find-file'." t nil)
(autoload 'info-lookup-symbol "info-look" "\
Display the definition of SYMBOL, as found in the relevant manual.
When this command is called interactively, it reads SYMBOL from the
-minibuffer. In the minibuffer, use M-n to yank the default argument
+minibuffer. In the minibuffer, use \\<minibuffer-local-completion-map>\\[next-history-element] to yank the default argument
value into the minibuffer so you can edit it. The default symbol is the
one found at point.
(autoload 'info-lookup-file "info-look" "\
Display the documentation of a file.
When this command is called interactively, it reads FILE from the minibuffer.
-In the minibuffer, use M-n to yank the default file name
+In the minibuffer, use \\<minibuffer-local-completion-map>\\[next-history-element] to yank the default file name
into the minibuffer so you can edit it.
The default file name is the one found at point.
Check that every node pointer points to an existing node." t nil)
(autoload 'batch-info-validate "informat" "\
-Runs `Info-validate' on the files remaining on the command line.
+Run `Info-validate' on the files remaining on the command line.
Must be used only with -batch, and kills Emacs on completion.
Each file will be processed even if an error occurred previously.
For example, invoke \"emacs -batch -f batch-info-validate $info/ ~/*.info\"" nil nil)
`S-cursor' Bind shifted keypad keys to the shifted cursor movement keys.
`cursor' Bind keypad keys to the cursor movement keys.
`numeric' Plain numeric keypad, i.e. 0 .. 9 and . (or DECIMAL arg)
- `none' Removes all bindings for keypad keys in function-key-map;
+ `none' Removes all bindings for keypad keys in `function-key-map';
this enables any user-defined bindings for the keypad keys
in the global and local keymaps.
;;; Generated autoloads from progmodes/ld-script.el
(autoload 'ld-script-mode "ld-script" "\
-A major mode to edit GNU ld script files
+A major mode to edit GNU ld script files.
\(fn)" t nil)
.site.contents))
If you nest `let-alist' invocations, the inner one can't access
-the variables of the outer one. You can, however, access alists
+the variables of the outer one. You can, however, access alists
inside the original alist by using dots inside the symbol, as
displayed in the example above.
(autoload 'kbd-macro-query "macros" "\
Query user during kbd macro execution.
- With prefix argument, enters recursive edit, reading keyboard
-commands even within a kbd macro. You can give different commands
-each time the macro executes.
- Without prefix argument, asks whether to continue running the macro.
+
+With prefix argument FLAG, enter recursive edit, reading
+keyboard commands even within a kbd macro. You can give
+different commands each time the macro executes.
+
+Without prefix argument, ask whether to continue running the
+macro.
+
Your options are: \\<query-replace-map>
+
\\[act] Finish this iteration normally and continue with the next.
\\[skip] Skip the rest of this iteration, and start the next.
\\[exit] Stop the macro entirely right now.
\f
;;;### (autoloads nil "map" "emacs-lisp/map.el" (0 0 0 0))
;;; Generated autoloads from emacs-lisp/map.el
-(push (purecopy '(map 3 1)) package--builtin-versions)
+(push (purecopy '(map 3 2 1)) package--builtin-versions)
(register-definition-prefixes "map" '("map-"))
(autoload 'nxml-mode "nxml-mode" "\
Major mode for editing XML.
-
+\\<nxml-mode-map>
\\[nxml-finish-element] finishes the current element by inserting an end-tag.
+
C-c C-i closes a start-tag with `>' and then inserts a balancing end-tag
leaving point between the start-tag and end-tag.
\\[nxml-balanced-close-start-tag-block] is similar but for block rather than inline elements:
(register-definition-prefixes "ob-C" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-J" "org/ob-J.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-J.el
-
-(register-definition-prefixes "ob-J" '("obj-" "org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-R" "org/ob-R.el" (0 0 0 0))
;;; Generated autoloads from org/ob-R.el
-(register-definition-prefixes "ob-R" '("ob-R-" "org-babel-"))
-
-;;;***
-\f
-;;;### (autoloads nil "ob-abc" "org/ob-abc.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-abc.el
-
-(register-definition-prefixes "ob-abc" '("org-babel-"))
-
-;;;***
-\f
-;;;### (autoloads nil "ob-asymptote" "org/ob-asymptote.el" (0 0 0
-;;;;;; 0))
-;;; Generated autoloads from org/ob-asymptote.el
-
-(register-definition-prefixes "ob-asymptote" '("org-babel-"))
+(register-definition-prefixes "ob-R" '("ob-" "org-babel-"))
;;;***
\f
(register-definition-prefixes "ob-comint" '("org-babel-comint-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-coq" "org/ob-coq.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-coq.el
-
-(register-definition-prefixes "ob-coq" '("coq-program-name" "org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-css" "org/ob-css.el" (0 0 0 0))
(register-definition-prefixes "ob-dot" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-ebnf" "org/ob-ebnf.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-ebnf.el
-
-(register-definition-prefixes "ob-ebnf" '("org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-emacs-lisp" "org/ob-emacs-lisp.el" (0 0
(register-definition-prefixes "ob-haskell" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-hledger" "org/ob-hledger.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-hledger.el
-
-(register-definition-prefixes "ob-hledger" '("org-babel-"))
-
-;;;***
-\f
-;;;### (autoloads nil "ob-io" "org/ob-io.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-io.el
-
-(register-definition-prefixes "ob-io" '("org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-java" "org/ob-java.el" (0 0 0 0))
;;;***
\f
-;;;### (autoloads nil "ob-latex" "org/ob-latex.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-latex.el
+;;;### (autoloads nil "ob-julia" "org/ob-julia.el" (0 0 0 0))
+;;; Generated autoloads from org/ob-julia.el
-(register-definition-prefixes "ob-latex" '("org-babel-"))
+(register-definition-prefixes "ob-julia" '("org-babel-"))
;;;***
\f
-;;;### (autoloads nil "ob-ledger" "org/ob-ledger.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-ledger.el
+;;;### (autoloads nil "ob-latex" "org/ob-latex.el" (0 0 0 0))
+;;; Generated autoloads from org/ob-latex.el
-(register-definition-prefixes "ob-ledger" '("org-babel-"))
+(register-definition-prefixes "ob-latex" '("org-babel-"))
;;;***
\f
;;;### (autoloads nil "ob-lilypond" "org/ob-lilypond.el" (0 0 0 0))
;;; Generated autoloads from org/ob-lilypond.el
-(register-definition-prefixes "ob-lilypond" '("lilypond-mode" "org-babel-"))
+(register-definition-prefixes "ob-lilypond" '("lilypond-mode" "ob-lilypond-header-args" "org-babel-"))
;;;***
\f
(register-definition-prefixes "ob-maxima" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-mscgen" "org/ob-mscgen.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-mscgen.el
-
-(register-definition-prefixes "ob-mscgen" '("org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-ocaml" "org/ob-ocaml.el" (0 0 0 0))
(register-definition-prefixes "ob-perl" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-picolisp" "org/ob-picolisp.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-picolisp.el
-
-(register-definition-prefixes "ob-picolisp" '("org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-plantuml" "org/ob-plantuml.el" (0 0 0 0))
(register-definition-prefixes "ob-shell" '("org-babel-"))
-;;;***
-\f
-;;;### (autoloads nil "ob-shen" "org/ob-shen.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-shen.el
-
-(register-definition-prefixes "ob-shen" '("org-babel-"))
-
;;;***
\f
;;;### (autoloads nil "ob-sql" "org/ob-sql.el" (0 0 0 0))
;;;***
\f
-;;;### (autoloads nil "ob-stan" "org/ob-stan.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-stan.el
+;;;### (autoloads nil "ob-table" "org/ob-table.el" (0 0 0 0))
+;;; Generated autoloads from org/ob-table.el
-(register-definition-prefixes "ob-stan" '("org-babel-"))
+(register-definition-prefixes "ob-table" '("org-"))
;;;***
\f
-;;;### (autoloads nil "ob-table" "org/ob-table.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-table.el
+;;;### (autoloads nil "oc" "org/oc.el" (0 0 0 0))
+;;; Generated autoloads from org/oc.el
-(register-definition-prefixes "ob-table" '("org-"))
+(register-definition-prefixes "oc" '("org-cite-"))
+
+;;;***
+\f
+;;;### (autoloads nil "oc-basic" "org/oc-basic.el" (0 0 0 0))
+;;; Generated autoloads from org/oc-basic.el
+
+(register-definition-prefixes "oc-basic" '("org-cite-basic-"))
+
+;;;***
+\f
+;;;### (autoloads nil "oc-biblatex" "org/oc-biblatex.el" (0 0 0 0))
+;;; Generated autoloads from org/oc-biblatex.el
+
+(register-definition-prefixes "oc-biblatex" '("org-cite-biblatex-"))
+
+;;;***
+\f
+;;;### (autoloads nil "oc-csl" "org/oc-csl.el" (0 0 0 0))
+;;; Generated autoloads from org/oc-csl.el
+
+(register-definition-prefixes "oc-csl" '("org-cite-csl-"))
;;;***
\f
-;;;### (autoloads nil "ob-vala" "org/ob-vala.el" (0 0 0 0))
-;;; Generated autoloads from org/ob-vala.el
+;;;### (autoloads nil "oc-natbib" "org/oc-natbib.el" (0 0 0 0))
+;;; Generated autoloads from org/oc-natbib.el
-(register-definition-prefixes "ob-vala" '("org-babel-"))
+(register-definition-prefixes "oc-natbib" '("org-cite-natbib-"))
;;;***
\f
(register-definition-prefixes "ol-docview" '("org-docview-"))
+;;;***
+\f
+;;;### (autoloads nil "ol-doi" "org/ol-doi.el" (0 0 0 0))
+;;; Generated autoloads from org/ol-doi.el
+
+(register-definition-prefixes "ol-doi" '("org-link-doi-"))
+
;;;***
\f
;;;### (autoloads nil "ol-eshell" "org/ol-eshell.el" (0 0 0 0))
(define-obsolete-function-alias 'delphi-mode #'opascal-mode "24.4")
(autoload 'opascal-mode "opascal" "\
-Major mode for editing OPascal code.\\<opascal-mode-map>
+Major mode for editing OPascal code.
+\\<opascal-mode-map>
\\[opascal-find-unit] - Search for a OPascal source file.
\\[opascal-fill-comment] - Fill the current comment.
\\[opascal-new-comment-line] - If in a // comment, do a new comment line.
\f
;;;### (autoloads nil "org" "org/org.el" (0 0 0 0))
;;; Generated autoloads from org/org.el
-(push (purecopy '(org 9 4 4)) package--builtin-versions)
+(push (purecopy '(org 9 5)) package--builtin-versions)
(autoload 'org-babel-do-load-languages "org" "\
Load the languages defined in `org-babel-load-languages'.
Pressing `<' twice means to restrict to the current subtree or region
\(if active).
-\(fn &optional ARG ORG-KEYS RESTRICTION)" t nil)
+\(fn &optional ARG KEYS RESTRICTION)" t nil)
(autoload 'org-batch-agenda "org-agenda" "\
Run an agenda command in batch mode and send the result to STDOUT.
The restriction will span over the entire file if TYPE is `file',
or if type is '(4), or if the cursor is before the first headline
-in the file. Otherwise, only apply the restriction to the current
+in the file. Otherwise, only apply the restriction to the current
subtree.
\(fn &optional TYPE)" t nil)
(register-definition-prefixes "outline" '("outline-"))
+;;;***
+\f
+;;;### (autoloads nil "ox-koma-letter" "org/ox-koma-letter.el" (0
+;;;;;; 0 0 0))
+;;; Generated autoloads from org/ox-koma-letter.el
+
+(autoload 'org-koma-letter-export-as-latex "ox-koma-letter" "\
+Export current buffer as a KOMA Scrlttr2 letter.
+
+If narrowing is active in the current buffer, only export its
+narrowed part.
+
+If a region is active, export that region.
+
+A non-nil optional argument ASYNC means the process should happen
+asynchronously. The resulting buffer should be accessible
+through the `org-export-stack' interface.
+
+When optional argument SUBTREEP is non-nil, export the sub-tree
+at point, extracting information from the headline properties
+first.
+
+When optional argument VISIBLE-ONLY is non-nil, don't export
+contents of hidden elements.
+
+When optional argument BODY-ONLY is non-nil, only write code
+between \"\\begin{letter}\" and \"\\end{letter}\".
+
+EXT-PLIST, when provided, is a property list with external
+parameters overriding Org default settings, but still inferior to
+file-local settings.
+
+Export is done in a buffer named \"*Org KOMA-LETTER Export*\". It
+will be displayed if `org-export-show-temporary-export-buffer' is
+non-nil.
+
+\(fn &optional ASYNC SUBTREEP VISIBLE-ONLY BODY-ONLY EXT-PLIST)" t nil)
+
+(autoload 'org-koma-letter-export-to-latex "ox-koma-letter" "\
+Export current buffer as a KOMA Scrlttr2 letter (tex).
+
+If narrowing is active in the current buffer, only export its
+narrowed part.
+
+If a region is active, export that region.
+
+A non-nil optional argument ASYNC means the process should happen
+asynchronously. The resulting file should be accessible through
+the `org-export-stack' interface.
+
+When optional argument SUBTREEP is non-nil, export the sub-tree
+at point, extracting information from the headline properties
+first.
+
+When optional argument VISIBLE-ONLY is non-nil, don't export
+contents of hidden elements.
+
+When optional argument BODY-ONLY is non-nil, only write code
+between \"\\begin{letter}\" and \"\\end{letter}\".
+
+EXT-PLIST, when provided, is a property list with external
+parameters overriding Org default settings, but still inferior to
+file-local settings.
+
+When optional argument PUB-DIR is set, use it as the publishing
+directory.
+
+Return output file's name.
+
+\(fn &optional ASYNC SUBTREEP VISIBLE-ONLY BODY-ONLY EXT-PLIST)" t nil)
+
+(autoload 'org-koma-letter-export-to-pdf "ox-koma-letter" "\
+Export current buffer as a KOMA Scrlttr2 letter (pdf).
+
+If narrowing is active in the current buffer, only export its
+narrowed part.
+
+If a region is active, export that region.
+
+A non-nil optional argument ASYNC means the process should happen
+asynchronously. The resulting file should be accessible through
+the `org-export-stack' interface.
+
+When optional argument SUBTREEP is non-nil, export the sub-tree
+at point, extracting information from the headline properties
+first.
+
+When optional argument VISIBLE-ONLY is non-nil, don't export
+contents of hidden elements.
+
+When optional argument BODY-ONLY is non-nil, only write code
+between \"\\begin{letter}\" and \"\\end{letter}\".
+
+EXT-PLIST, when provided, is a property list with external
+parameters overriding Org default settings, but still inferior to
+file-local settings.
+
+Return PDF file's name.
+
+\(fn &optional ASYNC SUBTREEP VISIBLE-ONLY BODY-ONLY EXT-PLIST)" t nil)
+
+(register-definition-prefixes "ox-koma-letter" '("org-koma-letter-"))
+
;;;***
\f
;;;### (autoloads nil "ox-man" "org/ox-man.el" (0 0 0 0))
;;;### (autoloads nil "paren" "paren.el" (0 0 0 0))
;;; Generated autoloads from paren.el
-(defvar show-paren-mode nil "\
+(defcustom show-paren-mode t "\
Non-nil if Show-Paren mode is enabled.
See the `show-paren-mode' command
for a description of this minor mode.
Setting this variable directly does not take effect;
either customize it (see the info node `Easy Customization')
-or call the function `show-paren-mode'.")
+or call the function `show-paren-mode'." :set #'custom-set-minor-mode :initialize 'custom-initialize-delay :type 'boolean :group 'paren-showing)
(custom-autoload 'show-paren-mode "paren" nil)
The mode's hook is called both when the mode is enabled and when it is
disabled.
-Show Paren mode is a global minor mode. When enabled, any
-matching parenthesis is highlighted in `show-paren-style' after
-`show-paren-delay' seconds of Emacs idle time.
+When enabled, any matching parenthesis is highlighted in `show-paren-style'
+after `show-paren-delay' seconds of Emacs idle time.
+
+This is a global minor mode. To toggle the mode in a single buffer,
+use `show-paren-local-mode'.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'show-paren-local-mode "paren" "\
+Toggle `show-paren-mode' only in this buffer.
+
+This is a minor mode. If called interactively, toggle the
+`Show-Paren-Local mode' mode. If the prefix argument is positive,
+enable the mode, and if it is zero or negative, disable the mode.
+
+If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
+mode if ARG is nil, omitted, or is a positive number. Disable the
+mode if ARG is a negative number.
+
+To check whether the minor mode is enabled in the current buffer,
+evaluate `(buffer-local-value 'show-paren-mode (current-buffer))'.
+
+The mode's hook is called both when the mode is enabled and when it is
+disabled.
\(fn &optional ARG)" t nil)
(autoload 'pcase-exhaustive "pcase" "\
The exhaustive version of `pcase' (which see).
-If EXP fails to match any of the patterns in CASES, an error is signaled.
+If EXP fails to match any of the patterns in CASES, an error is
+signaled.
+
+In contrast, `pcase' will return nil if there is no match, but
+not signal an error.
\(fn EXP &rest CASES)" nil t)
(put 'perl-label-offset 'safe-local-variable 'integerp)
(autoload 'perl-flymake "perl-mode" "\
-Perl backend for Flymake. Launches
-`perl-flymake-command' (which see) and passes to its standard
-input the contents of the current buffer. The output of this
-command is analyzed for error and warning messages.
+Perl backend for Flymake.
+Launch `perl-flymake-command' (which see) and pass to its
+standard input the contents of the current buffer. The output of
+this command is analyzed for error and warning messages.
\(fn REPORT-FN &rest ARGS)" nil nil)
Move southwest (sw) after insertion: \\[picture-movement-sw]
Move southeast (se) after insertion: \\[picture-movement-se]
- Move westnorthwest (wnw) after insertion: C-u \\[picture-movement-nw]
- Move eastnortheast (ene) after insertion: C-u \\[picture-movement-ne]
- Move westsouthwest (wsw) after insertion: C-u \\[picture-movement-sw]
- Move eastsoutheast (ese) after insertion: C-u \\[picture-movement-se]
+ Move westnorthwest (wnw) after insertion: \\[universal-argument] \\[picture-movement-nw]
+ Move eastnortheast (ene) after insertion: \\[universal-argument] \\[picture-movement-ne]
+ Move westsouthwest (wsw) after insertion: \\[universal-argument] \\[picture-movement-sw]
+ Move eastsoutheast (ese) after insertion: \\[universal-argument] \\[picture-movement-se]
The current direction is displayed in the mode line. The initial
direction is right. Whitespace is inserted and tabs are changed to
Preview directory using ghostview.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
Print directory using PostScript through ghostscript.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
Print directory using PostScript printer.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
It depends on `pr-print-using-ghostscript'.
Interactively, the command prompts for N-UP printing number, a directory, a
-file name regexp for matching and, when you use a prefix argument (C-u), the
+file name regexp for matching and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for a file name, and saves the PostScript image in
that file instead of saving it in a temporary file.
Preview buffer using ghostview.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of saving it in a temporary file.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
Print buffer using PostScript through ghostscript.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
Print buffer using PostScript printer.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
It depends on `pr-print-using-ghostscript'.
Interactively, the command prompts for N-UP printing number and, when you use a
-prefix argument (C-u), the command prompts the user for a file name, and saves
+prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves
the PostScript image in that file instead of sending it to the printer.
Noninteractively, if N-UP is nil, prompts for N-UP printing number. The
(autoload 'pr-despool-preview "printing" "\
Preview spooled PostScript.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of saving it in a temporary file.
(autoload 'pr-despool-using-ghostscript "printing" "\
Print spooled PostScript using ghostscript.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
(autoload 'pr-despool-print "printing" "\
Send the spooled PostScript to the printer.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
(autoload 'pr-despool-ps-print "printing" "\
Send the spooled PostScript to the printer or use ghostscript to print it.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a file name, and saves the spooled PostScript image in that file
instead of sending it to the printer.
Process a PostScript file IFILENAME and send it to printer.
Interactively, the command prompts for N-UP printing number, for an input
-PostScript file IFILENAME and, when you use a prefix argument (C-u), the
+PostScript file IFILENAME and, when you use a prefix argument (\\[universal-argument]), the
command prompts the user for an output PostScript file name OFILENAME, and
saves the PostScript image in that file instead of sending it to the printer.
Interactively, you have the following situations:
- M-x pr-ps-fast-fire RET
+ \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value and printing will
immediately be done using the current active printer.
- C-u M-x pr-ps-fast-fire RET
- C-u 0 M-x pr-ps-fast-fire RET
+ \\[universal-argument] \\[pr-ps-fast-fire]
+ \\[universal-argument] 0 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value and also for a current
PostScript printer, then printing will immediately be done using the new
current active printer.
- C-u 1 M-x pr-ps-fast-fire RET
+ \\[universal-argument] 1 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value and also for a file name,
and saves the PostScript image in that file instead of sending it to the
printer.
- C-u 2 M-x pr-ps-fast-fire RET
+ \\[universal-argument] 2 \\[pr-ps-fast-fire]
The command prompts the user for a N-UP value, then for a current
PostScript printer and, finally, for a file name. Then change the active
printer to that chosen by user and saves the PostScript image in
`pr-mode-alist' will be used, that is, the current buffer or region will be
printed using `pr-txt-mode'.
-Interactively, when you use a prefix argument (C-u), the command prompts the
+Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the
user for a new active text printer.
Noninteractively, the argument SELECT-PRINTER is treated as follows:
\f
;;;### (autoloads nil "project" "progmodes/project.el" (0 0 0 0))
;;; Generated autoloads from progmodes/project.el
-(push (purecopy '(project 0 6 1)) package--builtin-versions)
+(push (purecopy '(project 0 7 1)) package--builtin-versions)
(autoload 'project-current "project" "\
Return the project instance in DIRECTORY, defaulting to `default-directory'.
\(fn &optional MAYBE-PROMPT DIRECTORY)" nil nil)
-(defvar project-prefix-map (let ((map (make-sparse-keymap))) (define-key map "!" 'project-shell-command) (define-key map "&" 'project-async-shell-command) (define-key map "f" 'project-find-file) (define-key map "F" 'project-or-external-find-file) (define-key map "b" 'project-switch-to-buffer) (define-key map "s" 'project-shell) (define-key map "d" 'project-dired) (define-key map "v" 'project-vc-dir) (define-key map "c" 'project-compile) (define-key map "e" 'project-eshell) (define-key map "k" 'project-kill-buffers) (define-key map "p" 'project-switch-project) (define-key map "g" 'project-find-regexp) (define-key map "G" 'project-or-external-find-regexp) (define-key map "r" 'project-query-replace-regexp) (define-key map "x" 'project-execute-extended-command) map) "\
+(defvar project-prefix-map (let ((map (make-sparse-keymap))) (define-key map "!" 'project-shell-command) (define-key map "&" 'project-async-shell-command) (define-key map "f" 'project-find-file) (define-key map "F" 'project-or-external-find-file) (define-key map "b" 'project-switch-to-buffer) (define-key map "s" 'project-shell) (define-key map "d" 'project-find-dir) (define-key map "D" 'project-dired) (define-key map "v" 'project-vc-dir) (define-key map "c" 'project-compile) (define-key map "e" 'project-eshell) (define-key map "k" 'project-kill-buffers) (define-key map "p" 'project-switch-project) (define-key map "g" 'project-find-regexp) (define-key map "G" 'project-or-external-find-regexp) (define-key map "r" 'project-query-replace-regexp) (define-key map "x" 'project-execute-extended-command) map) "\
Keymap for project commands.")
(define-key ctl-x-map "p" project-prefix-map)
(autoload 'project-find-file "project" "\
Visit a file (with completion) in the current project.
-The completion default is the filename at point, determined by
-`thing-at-point' (whether such file exists or not)." t nil)
+The filename at point (determined by `thing-at-point'), if any,
+is available as part of \"future history\"." t nil)
(autoload 'project-or-external-find-file "project" "\
Visit a file (with completion) in the current project or external roots.
-The completion default is the filename at point, determined by
-`thing-at-point' (whether such file exists or not)." t nil)
+The filename at point (determined by `thing-at-point'), if any,
+is available as part of \"future history\"." t nil)
+
+(autoload 'project-find-dir "project" "\
+Start Dired in a directory inside the current project." t nil)
(autoload 'project-dired "project" "\
Start Dired in the current project's root." t nil)
(autoload 'project-query-replace-regexp "project" "\
Query-replace REGEXP in all the files of the project.
Stops when a match is found and prompts for whether to replace it.
-If you exit the query-replace, you can later continue the query-replace
-loop using the command \\[fileloop-continue].
+If you exit the `query-replace', you can later continue the
+`query-replace' loop using the command \\[fileloop-continue].
\(fn FROM TO)" t nil)
(autoload 'project-remember-project "project" "\
Add project PR to the front of the project list.
-Save the result in `project-list-file' if the list of projects has changed.
+Save the result in `project-list-file' if the list of projects
+has changed, and NO-WRITE is nil.
-\(fn PR)" nil nil)
+\(fn PR &optional NO-WRITE)" nil nil)
(autoload 'project-forget-project "project" "\
Remove directory PROJECT-ROOT from the project list.
(autoload 'pulse-momentary-highlight-one-line "pulse" "\
Highlight the line around POINT, unhighlighting before next command.
+If POINT is nil or missing, the current point is used instead.
+
Optional argument FACE specifies the face to do the highlighting.
-\(fn POINT &optional FACE)" nil nil)
+\(fn &optional POINT FACE)" nil nil)
(autoload 'pulse-momentary-highlight-region "pulse" "\
Highlight between START and END, unhighlighting before next command.
vs. corresponding command to be called.
If SIMPLE is non-nil, then we do not alter the meanings of
-commands such as C-f, C-b, C-n, C-p and TAB; they are treated as
+commands such as \\[forward-char], \\[backward-char], \\[next-line], \\[previous-line] and \\[indent-for-tab-command]; they are treated as
non-Quail commands.
\(fn NAME LANGUAGE TITLE &optional GUIDANCE DOCSTRING TRANSLATION-KEYS FORGET-LAST-SELECTION DETERMINISTIC KBD-TRANSLATE SHOW-LAYOUT CREATE-DECODE-MAP MAXIMUM-SHORTEST OVERLAY-PLIST UPDATE-TRANSLATION-FUNCTION CONVERSION-KEYS SIMPLE)" nil nil)
Toggle Repeat mode.
When Repeat mode is enabled, and the command symbol has the property named
`repeat-map', this map is activated temporarily for the next command.
+See `describe-repeat-maps' for a list of all repeatable command.
This is a minor mode. If called interactively, toggle the `Repeat
mode' mode. If the prefix argument is positive, enable the mode, and
\f
;;;### (autoloads nil "seq" "emacs-lisp/seq.el" (0 0 0 0))
;;; Generated autoloads from emacs-lisp/seq.el
-(push (purecopy '(seq 2 22)) package--builtin-versions)
+(push (purecopy '(seq 2 23)) package--builtin-versions)
(autoload 'seq-subseq "seq" "\
Return the sequence of elements of SEQUENCE from START to END.
\(fn SEQUENCE &optional TESTFN)" nil nil)
-(autoload 'seq-intersection "seq" "\
-Return a list of the elements that appear in both SEQUENCE1 and SEQUENCE2.
+(autoload 'seq-union "seq" "\
+Return a list of all elements that appear in either SEQUENCE1 or SEQUENCE2.
Equality is defined by TESTFN if non-nil or by `equal' if nil.
\(fn SEQUENCE1 SEQUENCE2 &optional TESTFN)" nil nil)
-(autoload 'seq-difference "seq" "\
-Return a list of the elements that appear in SEQUENCE1 but not in SEQUENCE2.
+(autoload 'seq-intersection "seq" "\
+Return a list of the elements that appear in both SEQUENCE1 and SEQUENCE2.
Equality is defined by TESTFN if non-nil or by `equal' if nil.
\(fn SEQUENCE1 SEQUENCE2 &optional TESTFN)" nil nil)
\(fn SEQUENCE)" nil nil)
+(autoload 'seq-random-elt "seq" "\
+Return a random element from SEQUENCE.
+Signal an error if SEQUENCE is empty.
+
+\(fn SEQUENCE)" nil nil)
+
(register-definition-prefixes "seq" '("seq-"))
;;;***
have <h1>Very Major Headlines</h1> through <h6>Very Minor Headlines</h6>
<hr> Parts can be separated with horizontal rules.
-<p>Paragraphs only need an opening tag. Line breaks and multiple spaces are
-ignored unless the text is <pre>preformatted.</pre> Text can be marked as
-<strong>bold</strong>, <em>italic</em> or <u>underlined</u> using the normal M-o
-or Edit/Text Properties/Face commands.
+<p>Paragraphs only need an opening tag. Line breaks and multiple
+spaces are ignored unless the text is <pre>preformatted.</pre>
+Text can be marked as <strong>bold</strong>, <em>italic</em> or
+<u>underlined</u> using the facemenu M-o or Edit/Text
+Properties/Face commands.
Pages can have <a name=\"SOMENAME\">named points</a> and can link other points
to them with <a href=\"#SOMENAME\">see also somename</a>. In the same way <a
\(fn GROUP &optional FUNCTION)" t nil)
-(register-definition-prefixes "shortdoc" '("alist" "buffer" "define-short-documentation-group" "file" "hash-table" "list" "number" "overlay" "process" "regexp" "sequence" "shortdoc-" "string" "vector"))
+(register-definition-prefixes "shortdoc" '("alist" "buffer" "define-short-documentation-group" "file" "hash-table" "list" "number" "overlay" "process" "regexp" "sequence" "shortdoc-" "string" "text-properties" "vector"))
;;;***
\f
Comments start with -- and end with newline or another --.
Delete converts tabs to spaces as it moves back.
\\{snmp-mode-map}
-Turning on snmp-mode runs the hooks in `snmp-common-mode-hook', then
+Turning on `snmp-mode' runs the hooks in `snmp-common-mode-hook', then
`snmp-mode-hook'." t nil)
(autoload 'snmpv2-mode "snmp-mode" "\
Comments start with -- and end with newline or another --.
Delete converts tabs to spaces as it moves back.
\\{snmp-mode-map}
-Turning on snmp-mode runs the hooks in `snmp-common-mode-hook',
+Turning on `snmp-mode' runs the hooks in `snmp-common-mode-hook',
then `snmpv2-mode-hook'." t nil)
(register-definition-prefixes "snmp-mode" '("snmp"))
\f
;;;### (autoloads nil "so-long" "so-long.el" (0 0 0 0))
;;; Generated autoloads from so-long.el
-(push (purecopy '(so-long 1 1 1)) package--builtin-versions)
+(push (purecopy '(so-long 1 1 2)) package--builtin-versions)
(autoload 'so-long-commentary "so-long" "\
-View the so-long documentation in `outline-mode'." t nil)
+View the `so-long' library's documentation in `outline-mode'." t nil)
(autoload 'so-long-customize "so-long" "\
-Open the so-long `customize' group." t nil)
+Open the customization group `so-long'." t nil)
(autoload 'so-long-minor-mode "so-long" "\
This is the minor mode equivalent of `so-long-mode'.
Use \\[so-long-commentary] for more information.
-Use \\[so-long-customize] to configure the behaviour.
+Use \\[so-long-customize] to open the customization group `so-long' to
+configure the behaviour.
\(fn)" t nil)
\(fn &optional ACTION)" t nil)
(autoload 'so-long-enable "so-long" "\
-Enable the so-long library's functionality.
+Enable the `so-long' library's functionality.
Equivalent to calling (global-so-long-mode 1)" t nil)
Use \\[so-long-commentary] for more information.
-Use \\[so-long-customize] to configure the behaviour.
+Use \\[so-long-customize] to open the customization group `so-long' to
+configure the behaviour.
\(fn &optional ARG)" t nil)
the sort order.
The next four arguments are functions to be called to move point
-across a sort record. They will be called many times from within sort-subr.
+across a sort record. They will be called many times from within `sort-subr'.
NEXTRECFUN is called with point at the end of the previous record.
It moves point to the start of the next record.
It should move point to the end of the buffer if there are no more records.
-The first record is assumed to start at the position of point when sort-subr
+The first record is assumed to start at the position of point when `sort-subr'
is called.
ENDRECFUN is called with point within the record.
Non-interactively, arguments BEG and END delimit the region.
Normally it searches forwards, keeping the first instance of
each identical line. If REVERSE is non-nil (interactively, with
-a C-u prefix), it searches backwards and keeps the last instance of
+a \\[universal-argument] prefix), it searches backwards and keeps the last instance of
each repeated line.
Identical lines need not be adjacent, unless the argument
-ADJACENT is non-nil (interactively, with a C-u C-u prefix).
+ADJACENT is non-nil (interactively, with a \\[universal-argument] \\[universal-argument] prefix).
This is a more efficient mode of operation, and may be useful
on large regions that have already been sorted.
If the argument KEEP-BLANKS is non-nil (interactively, with a
-C-u C-u C-u prefix), it retains repeated blank lines.
+\\[universal-argument] \\[universal-argument] \\[universal-argument] prefix), it retains repeated blank lines.
Returns the number of deleted lines. Interactively, or if INTERACTIVE
is non-nil, it also prints a message describing the number of deletions.
;;; Generated autoloads from play/spook.el
(autoload 'spook "spook" "\
-Adds that special touch of class to your outgoing mail." t nil)
+Add that special touch of class to your outgoing mail." t nil)
(autoload 'snarf-spooks "spook" "\
Return a vector containing the lines from `spook-phrases-file'." nil nil)
Enable the mode if ARG is nil, omitted, or is a positive number.
Disable the mode if ARG is a negative number.
-Tab-Line mode is enabled in all buffers where
-`tab-line-mode--turn-on' would do it.
+Tab-Line mode is enabled in all buffers where `tab-line-mode--turn-on'
+would do it.
See `tab-line-mode' for more information on Tab-Line mode.
Move point forward to the beginning of the next cell.
With argument ARG, do it ARG times;
a negative argument ARG = -N means move backward N cells.
-Do not specify NO-RECOGNIZE and UNRECOGNIZE. They are for internal use only.
+
+Do not specify NO-RECOGNIZE and UNRECOGNIZE. They are for
+internal use only.
Sample Cell Traveling Order (In Irregular Table Cases)
rotate the shape to fit in with those at the bottom of the screen so
as to form complete rows.
-tetris-mode keybindings:
+`tetris-mode' keybindings:
\\<tetris-mode-map>
\\[tetris-start-game] Start a new game of Tetris
\\[tetris-end-game] Terminate the current game
the `makeinfo' program. These files must be written in a very restricted and
modified version of TeX input format.
- Editing commands are like text-mode except that the syntax table is
+ Editing commands are like `text-mode' except that the syntax table is
set up so expression commands skip Texinfo bracket groups. To see
what the Info version of a region of the Texinfo file will look like,
use \\[makeinfo-region], which runs `makeinfo' on the current region.
Here are the functions:
- texinfo-update-node \\[texinfo-update-node]
- texinfo-every-node-update \\[texinfo-every-node-update]
- texinfo-sequential-node-update
+ `texinfo-update-node' \\[texinfo-update-node]
+ `texinfo-every-node-update' \\[texinfo-every-node-update]
+ `texinfo-sequential-node-update'
- texinfo-make-menu \\[texinfo-make-menu]
- texinfo-all-menus-update \\[texinfo-all-menus-update]
- texinfo-master-menu
+ `texinfo-make-menu' \\[texinfo-make-menu]
+ `texinfo-all-menus-update' \\[texinfo-all-menus-update]
+ `texinfo-master-menu'
- texinfo-indent-menu-description (column &optional region-p)
+ `texinfo-indent-menu-description' (column &optional region-p)
The `texinfo-column-for-description' variable specifies the column to
which menu descriptions are indented.
\(fn THING &optional NO-PROPERTIES)" nil nil)
+(autoload 'bounds-of-thing-at-mouse "thingatpt" "\
+Determine start and end locations for THING at mouse click given by EVENT.
+Like `bounds-of-thing-at-point', but tries to use the position in EVENT
+where the mouse button is clicked to find the thing nearby.
+
+\(fn EVENT THING)" nil nil)
+
+(autoload 'thing-at-mouse "thingatpt" "\
+Return the THING at mouse click specified by EVENT.
+Like `thing-at-point', but tries to use the position in EVENT
+where the mouse button is clicked to find the thing nearby.
+
+\(fn EVENT THING &optional NO-PROPERTIES)" nil nil)
+
(autoload 'sexp-at-point "thingatpt" "\
Return the sexp at point, or nil if none is found." nil nil)
(autoload 'tibetan-decompose-region "tibet-util" "\
Decompose Tibetan text in the region FROM and TO.
-This is different from decompose-region because precomposed Tibetan characters
-are decomposed into normal Tibetan character sequences.
+This is different from `decompose-region' because precomposed
+Tibetan characters are decomposed into normal Tibetan character
+sequences.
\(fn FROM TO)" t nil)
(autoload 'tibetan-decompose-string "tibet-util" "\
Decompose Tibetan string STR.
-This is different from decompose-string because precomposed Tibetan characters
-are decomposed into normal Tibetan character sequences.
+This is different from `decompose-string' because precomposed
+Tibetan characters are decomposed into normal Tibetan character
+sequences.
\(fn STR)" nil nil)
(autoload 'tibetan-compose-buffer "tibet-util" "\
Composes Tibetan character components in the buffer.
-See also docstring of the function tibetan-compose-region." t nil)
+See also docstring of the function `tibetan-compose-region'." t nil)
(autoload 'tibetan-post-read-conversion "tibet-util" "\
(autoload 'emacs-init-time "time" "\
Return a string giving the duration of the Emacs initialization.
-FORMAT is a string to format the result, using `format'. If nil,
+FORMAT is a string to format the result, using `format'. If nil,
the default format \"%f seconds\" is used.
\(fn &optional FORMAT)" t nil)
;;; Generated autoloads from url/url-auth.el
(autoload 'url-get-authentication "url-auth" "\
-Return an authorization string suitable for use in the WWW-Authenticate
-header in an HTTP/1.0 request.
+Return authorization string for the WWW-Authenticate header in HTTP/1.0 request.
URL is the url you are requesting authorization to. This can be either a
string representing the URL, or the parsed representation returned by
\(This is the same format as produced by `url-parse-query-string')
This will return a string
-\"key1=val1&key2=val2&key3=val1&key3=val2&key4&key5\". Keys may
+\"key1=val1&key2=val2&key3=val1&key3=val2&key4&key5\". Keys may
be strings or symbols; if they are symbols, the symbol name will
be used.
\(fn BRANCH)" t nil)
(autoload 'vc-log-incoming "vc" "\
-Show a log of changes that will be received with a pull operation from REMOTE-LOCATION.
+Show log of changes that will be received with pull from REMOTE-LOCATION.
When called interactively with a prefix argument, prompt for REMOTE-LOCATION.
\(fn &optional REMOTE-LOCATION)" t nil)
(autoload 'vc-log-outgoing "vc" "\
-Show a log of changes that will be sent with a push operation to REMOTE-LOCATION.
+Show log of changes that will be sent with a push operation to REMOTE-LOCATION.
When called interactively with a prefix argument, prompt for REMOTE-LOCATION.
\(fn &optional REMOTE-LOCATION)" t nil)
\(fn DIR &optional BACKEND)" t nil)
(autoload 'vc-dir-bookmark-jump "vc-dir" "\
-Provides the bookmark-jump behavior for a `vc-dir' buffer.
+Provide the `bookmark-jump' behavior for a `vc-dir' buffer.
This implements the `handler' function interface for the record
type returned by `vc-dir-bookmark-make-record'.
;;;### (autoloads nil "verilog-mode" "progmodes/verilog-mode.el"
;;;;;; (0 0 0 0))
;;; Generated autoloads from progmodes/verilog-mode.el
-(push (purecopy '(verilog-mode 2021 4 12 188864585)) package--builtin-versions)
+(push (purecopy '(verilog-mode 2021 9 23 89128420)) package--builtin-versions)
(autoload 'verilog-mode "verilog-mode" "\
Major mode for editing Verilog code.
\\[verilog-sk-repeat] Insert a repeat (..) begin .. end block.
\\[verilog-sk-specify] Insert a specify .. endspecify block.
\\[verilog-sk-task] Insert a task .. begin .. end endtask block.
- \\[verilog-sk-while] Insert a while (...) begin .. end block, prompting for details.
- \\[verilog-sk-casex] Insert a casex (...) item: begin.. end endcase block, prompting for details.
- \\[verilog-sk-casez] Insert a casez (...) item: begin.. end endcase block, prompting for details.
+ \\[verilog-sk-while] Insert a while (...) begin .. end block,
+ prompting for details.
+ \\[verilog-sk-casex] Insert a casex (...) item: begin.. end endcase block,
+ prompting for details.
+ \\[verilog-sk-casez] Insert a casez (...) item: begin.. end endcase block,
+ prompting for details.
\\[verilog-sk-if] Insert an if (..) begin .. end block.
\\[verilog-sk-else-if] Insert an else if (..) begin .. end block.
\\[verilog-sk-comment] Insert a comment block.
`vhdl-project-alist'.
- SPECIAL MENUES:
+ SPECIAL MENUS:
As an alternative to the speedbar, an index menu can be added (set
option `vhdl-index-menu' to non-nil) or made accessible as a mouse menu
(e.g. add \"(global-set-key [S-down-mouse-3] \\='imenu)\" to your start-up
If Viper is enabled, turn it off. Otherwise, turn it on." t nil)
(autoload 'viper-mode "viper" "\
-Turn on Viper emulation of Vi in Emacs. See Info node `(viper)Top'." t nil)
+Turn on Viper emulation of Vi in Emacs. See Info node `(viper)Top'." t nil)
(register-definition-prefixes "viper" '("set-viper-state-in-major-mode" "this-major-mode-requires-vi-state" "viper-"))
See also `whitespace-style', `whitespace-newline' and
`whitespace-display-mappings'.
+This mode uses a number of faces to visualize the whitespace; see
+the customization group `whitespace' for details.
+
\(fn &optional ARG)" t nil)
(autoload 'whitespace-newline-mode "whitespace" "\
(autoload 'windmove-delete-left "windmove" "\
Delete the window to the left of the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was to the left of the current one.
\(fn &optional ARG)" t nil)
(autoload 'windmove-delete-up "windmove" "\
Delete the window above the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was above the current one.
\(fn &optional ARG)" t nil)
(autoload 'windmove-delete-right "windmove" "\
Delete the window to the right of the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was to the right of the current one.
\(fn &optional ARG)" t nil)
(autoload 'windmove-delete-down "windmove" "\
Delete the window below the current one.
-If prefix ARG is `C-u', delete the selected window and
+If prefix ARG is \\[universal-argument], delete the selected window and
select the window that was below the current one.
\(fn &optional ARG)" t nil)
direction. Keybindings are of the form PREFIX MODIFIERS-{left,right,up,down},
where PREFIX is a prefix key and MODIFIERS is either a list of modifiers or
a single modifier.
-If PREFIX is `none', no prefix is used. If MODIFIERS is `none', the keybindings
-are directly bound to the arrow keys.
+If PREFIX is `none', no prefix is used. If MODIFIERS is `none',
+the keybindings are directly bound to the arrow keys.
Default value of PREFIX is `C-x' and MODIFIERS is `shift'.
\(fn &optional PREFIX MODIFIERS)" t nil)
\f
;;;### (autoloads nil "xref" "progmodes/xref.el" (0 0 0 0))
;;; Generated autoloads from progmodes/xref.el
-(push (purecopy '(xref 1 1 0)) package--builtin-versions)
+(push (purecopy '(xref 1 2 2)) package--builtin-versions)
(autoload 'xref-find-backend "xref" nil nil nil)
(autoload 'xref-find-apropos "xref" "\
Find all meaningful symbols that match PATTERN.
The argument has the same meaning as in `apropos'.
+See `tags-apropos-additional-actions' for how to augment the
+output of this command when the backend is etags.
\(fn PATTERN)" t nil)
(define-key esc-map "." #'xref-find-definitions)
Return a list of xref values.
FILES must be a list of absolute file names.
+See `xref-search-program' and `xref-search-program-alist' for how
+to control which program to use when looking for matches.
+
\(fn REGEXP FILES)" nil nil)
(register-definition-prefixes "xref" '("xref-"))
;;;;;; "emacs-lisp/lisp-mode.el" "emacs-lisp/lisp.el" "emacs-lisp/macroexp.el"
;;;;;; "emacs-lisp/map-ynp.el" "emacs-lisp/nadvice.el" "emacs-lisp/syntax.el"
;;;;;; "emacs-lisp/timer.el" "env.el" "epa-hook.el" "erc/erc-autoaway.el"
-;;;;;; "erc/erc-button.el" "erc/erc-capab.el" "erc/erc-dcc.el" "erc/erc-desktop-notifications.el"
-;;;;;; "erc/erc-ezbounce.el" "erc/erc-fill.el" "erc/erc-identd.el"
-;;;;;; "erc/erc-imenu.el" "erc/erc-join.el" "erc/erc-list.el" "erc/erc-log.el"
-;;;;;; "erc/erc-match.el" "erc/erc-menu.el" "erc/erc-netsplit.el"
-;;;;;; "erc/erc-notify.el" "erc/erc-page.el" "erc/erc-pcomplete.el"
-;;;;;; "erc/erc-replace.el" "erc/erc-ring.el" "erc/erc-services.el"
-;;;;;; "erc/erc-sound.el" "erc/erc-speedbar.el" "erc/erc-spelling.el"
-;;;;;; "erc/erc-stamp.el" "erc/erc-status-sidebar.el" "erc/erc-track.el"
-;;;;;; "erc/erc-truncate.el" "erc/erc-xdcc.el" "eshell/em-alias.el"
-;;;;;; "eshell/em-banner.el" "eshell/em-basic.el" "eshell/em-cmpl.el"
-;;;;;; "eshell/em-dirs.el" "eshell/em-glob.el" "eshell/em-hist.el"
-;;;;;; "eshell/em-ls.el" "eshell/em-pred.el" "eshell/em-prompt.el"
-;;;;;; "eshell/em-rebind.el" "eshell/em-script.el" "eshell/em-smart.el"
-;;;;;; "eshell/em-term.el" "eshell/em-tramp.el" "eshell/em-unix.el"
-;;;;;; "eshell/em-xtra.el" "faces.el" "files.el" "font-core.el"
-;;;;;; "font-lock.el" "format.el" "frame.el" "help.el" "hfy-cmap.el"
-;;;;;; "ibuf-ext.el" "indent.el" "international/characters.el" "international/charscript.el"
-;;;;;; "international/cp51932.el" "international/eucjp-ms.el" "international/iso-transl.el"
-;;;;;; "international/mule-cmds.el" "international/mule-conf.el"
-;;;;;; "international/mule.el" "isearch.el" "jit-lock.el" "jka-cmpr-hook.el"
-;;;;;; "language/burmese.el" "language/cham.el" "language/chinese.el"
-;;;;;; "language/cyrillic.el" "language/czech.el" "language/english.el"
-;;;;;; "language/ethiopic.el" "language/european.el" "language/georgian.el"
-;;;;;; "language/greek.el" "language/hebrew.el" "language/indian.el"
-;;;;;; "language/japanese.el" "language/khmer.el" "language/korean.el"
-;;;;;; "language/lao.el" "language/misc-lang.el" "language/romanian.el"
-;;;;;; "language/sinhala.el" "language/slovak.el" "language/tai-viet.el"
-;;;;;; "language/thai.el" "language/tibetan.el" "language/utf-8-lang.el"
-;;;;;; "language/vietnamese.el" "ldefs-boot.el" "leim/ja-dic/ja-dic.el"
-;;;;;; "leim/leim-list.el" "leim/quail/4Corner.el" "leim/quail/ARRAY30.el"
-;;;;;; "leim/quail/CCDOSPY.el" "leim/quail/CTLau-b5.el" "leim/quail/CTLau.el"
-;;;;;; "leim/quail/ECDICT.el" "leim/quail/ETZY.el" "leim/quail/PY-b5.el"
-;;;;;; "leim/quail/PY.el" "leim/quail/Punct-b5.el" "leim/quail/Punct.el"
-;;;;;; "leim/quail/QJ-b5.el" "leim/quail/QJ.el" "leim/quail/SW.el"
-;;;;;; "leim/quail/TONEPY.el" "leim/quail/ZIRANMA.el" "leim/quail/ZOZY.el"
-;;;;;; "leim/quail/arabic.el" "leim/quail/cham.el" "leim/quail/compose.el"
-;;;;;; "leim/quail/croatian.el" "leim/quail/cyril-jis.el" "leim/quail/cyrillic.el"
-;;;;;; "leim/quail/czech.el" "leim/quail/georgian.el" "leim/quail/greek.el"
-;;;;;; "leim/quail/hanja-jis.el" "leim/quail/hanja.el" "leim/quail/hanja3.el"
-;;;;;; "leim/quail/hebrew.el" "leim/quail/ipa-praat.el" "leim/quail/latin-alt.el"
-;;;;;; "leim/quail/latin-ltx.el" "leim/quail/latin-post.el" "leim/quail/latin-pre.el"
-;;;;;; "leim/quail/persian.el" "leim/quail/programmer-dvorak.el"
+;;;;;; "erc/erc-button.el" "erc/erc-capab.el" "erc/erc-compat.el"
+;;;;;; "erc/erc-dcc.el" "erc/erc-desktop-notifications.el" "erc/erc-ezbounce.el"
+;;;;;; "erc/erc-fill.el" "erc/erc-identd.el" "erc/erc-imenu.el"
+;;;;;; "erc/erc-join.el" "erc/erc-list.el" "erc/erc-log.el" "erc/erc-match.el"
+;;;;;; "erc/erc-menu.el" "erc/erc-netsplit.el" "erc/erc-notify.el"
+;;;;;; "erc/erc-page.el" "erc/erc-pcomplete.el" "erc/erc-replace.el"
+;;;;;; "erc/erc-ring.el" "erc/erc-services.el" "erc/erc-sound.el"
+;;;;;; "erc/erc-speedbar.el" "erc/erc-spelling.el" "erc/erc-stamp.el"
+;;;;;; "erc/erc-status-sidebar.el" "erc/erc-track.el" "erc/erc-truncate.el"
+;;;;;; "erc/erc-xdcc.el" "eshell/em-alias.el" "eshell/em-banner.el"
+;;;;;; "eshell/em-basic.el" "eshell/em-cmpl.el" "eshell/em-dirs.el"
+;;;;;; "eshell/em-glob.el" "eshell/em-hist.el" "eshell/em-ls.el"
+;;;;;; "eshell/em-pred.el" "eshell/em-prompt.el" "eshell/em-rebind.el"
+;;;;;; "eshell/em-script.el" "eshell/em-smart.el" "eshell/em-term.el"
+;;;;;; "eshell/em-tramp.el" "eshell/em-unix.el" "eshell/em-xtra.el"
+;;;;;; "faces.el" "files.el" "font-core.el" "font-lock.el" "format.el"
+;;;;;; "frame.el" "help.el" "hfy-cmap.el" "ibuf-ext.el" "indent.el"
+;;;;;; "international/characters.el" "international/charscript.el"
+;;;;;; "international/cp51932.el" "international/emoji-zwj.el" "international/eucjp-ms.el"
+;;;;;; "international/iso-transl.el" "international/mule-cmds.el"
+;;;;;; "international/mule-conf.el" "international/mule.el" "isearch.el"
+;;;;;; "jit-lock.el" "jka-cmpr-hook.el" "language/burmese.el" "language/cham.el"
+;;;;;; "language/chinese.el" "language/cyrillic.el" "language/czech.el"
+;;;;;; "language/english.el" "language/ethiopic.el" "language/european.el"
+;;;;;; "language/georgian.el" "language/greek.el" "language/hebrew.el"
+;;;;;; "language/indian.el" "language/japanese.el" "language/khmer.el"
+;;;;;; "language/korean.el" "language/lao.el" "language/misc-lang.el"
+;;;;;; "language/romanian.el" "language/sinhala.el" "language/slovak.el"
+;;;;;; "language/tai-viet.el" "language/thai.el" "language/tibetan.el"
+;;;;;; "language/utf-8-lang.el" "language/vietnamese.el" "ldefs-boot.el"
+;;;;;; "leim/ja-dic/ja-dic.el" "leim/leim-list.el" "leim/quail/4Corner.el"
+;;;;;; "leim/quail/ARRAY30.el" "leim/quail/CCDOSPY.el" "leim/quail/CTLau-b5.el"
+;;;;;; "leim/quail/CTLau.el" "leim/quail/ECDICT.el" "leim/quail/ETZY.el"
+;;;;;; "leim/quail/PY-b5.el" "leim/quail/PY.el" "leim/quail/Punct-b5.el"
+;;;;;; "leim/quail/Punct.el" "leim/quail/QJ-b5.el" "leim/quail/QJ.el"
+;;;;;; "leim/quail/SW.el" "leim/quail/TONEPY.el" "leim/quail/ZIRANMA.el"
+;;;;;; "leim/quail/ZOZY.el" "leim/quail/arabic.el" "leim/quail/cham.el"
+;;;;;; "leim/quail/compose.el" "leim/quail/croatian.el" "leim/quail/cyril-jis.el"
+;;;;;; "leim/quail/cyrillic.el" "leim/quail/czech.el" "leim/quail/georgian.el"
+;;;;;; "leim/quail/greek.el" "leim/quail/hanja-jis.el" "leim/quail/hanja.el"
+;;;;;; "leim/quail/hanja3.el" "leim/quail/hebrew.el" "leim/quail/ipa-praat.el"
+;;;;;; "leim/quail/latin-alt.el" "leim/quail/latin-ltx.el" "leim/quail/latin-post.el"
+;;;;;; "leim/quail/latin-pre.el" "leim/quail/persian.el" "leim/quail/programmer-dvorak.el"
;;;;;; "leim/quail/py-punct.el" "leim/quail/pypunct-b5.el" "leim/quail/quick-b5.el"
;;;;;; "leim/quail/quick-cns.el" "leim/quail/rfc1345.el" "leim/quail/sami.el"
;;;;;; "leim/quail/sgml-input.el" "leim/quail/slovak.el" "leim/quail/symbol-ksc.el"
projects / emacs.git / commitdiff