@itemize @minus
@item
-@file{easymeny.el}, a facility for defining Emacs menus,
+@file{easymenu.el}, a facility for defining Emacs menus,
@item
@file{menu-bar.el}, the Emacs menu bar support code,
@item
@item
Tom Tromey and Chris Lindblad wrote @file{tcl.el}, a major mode for
-editing Tcl/Tk source files and running a Tcl interpeter as an Emacs
+editing Tcl/Tk source files and running a Tcl interpreter as an Emacs
subprocess.
@item
defined in your application
* File Browser:: Easy access to your files
* Automatic Smart Indentation:: Indenting your code automatically as you type
-* Formatting Parameter Lists:: Formating subprograms parameter lists
+* Formatting Parameter Lists:: Formatting subprograms' parameter lists
automatically
* Automatic Casing:: Adjusting the case of words automatically
* Statement Templates:: Inserting code templates
switching between spec and body files with eventually
auto-generation of body files,
@item
-automatic formating of subprograms parameter lists.
+automatic formatting of subprograms' parameter lists.
@item
automatic smart indentation according to Ada syntax,
@item
place.
You can activate this mode by typing @key{M-x speedbar} in the editor.
-This will open a new frame. A better way might be to assicate the
+This will open a new frame. A better way might be to associate the
following key binding
@example
source files insert the usual header, with a copyright of your
environment variable @env{$ORGANIZATION} or else the FSF, and prompt
for valid keywords describing the contents. Files in a @file{bin}
-directory for which Emacs could determine no specialised mode
+directory for which Emacs could determine no specialized mode
(@pxref{(emacs)Choosing Modes}) are set to Shell script mode.
@findex define-auto-insert
with a single capital letter showing which letter you press to get
that command. We have used @kbd{t n}, @kbd{t p}, @kbd{t ]}, and
@kbd{t y} so far. The @samp{[MORE]} means you can press @kbd{?}
-again to see more @kbd{t}-prefix comands. Notice that the commands
+again to see more @kbd{t}-prefix commands. Notice that the commands
are roughly divided (by semicolons) into related groups.
When you are in the help display for a prefix key, the prefix is
infinity we had earlier. If you work it out, you might expect
the answer to be @i{-72} for this. But the 72 has been completely
lost next to the infinities; by the time we compute @w{@samp{inf - inf}}
-the finite difference between them, if any, is indetectable.
+the finite difference between them, if any, is undetectable.
So we say the result is @dfn{indeterminate}, which Calc writes
with the symbol @code{nan} (for Not A Number).
@end group
@end smallexample
-@ifinfo
@noindent
-Et voila, September 13, 1991 is a Friday.
-@end ifinfo
-@tex
-\noindent
-{\it Et voil{\accent"12 a}}, September 13, 1991 is a Friday.
-@end tex
+Et voil@`a, September 13, 1991 is a Friday.
@smallexample
@group
@noindent
@cindex Stack basics
@c [fix-tut RPN Calculations and the Stack]
-Calc uses RPN notation. If you are not familar with RPN, @pxref{RPN
+Calc uses RPN notation. If you are not familiar with RPN, @pxref{RPN
Tutorial}.
To add the numbers 1 and 2 in Calc you would type the keys:
decimal point. Decreasing the precision below 12 may cause the
time part of a date form to become inaccurate. This can also happen
if astronomically high years are used, though this will not be an
-issue in everyday (or even everymillenium) use. Note that date
+issue in everyday (or even everymillennium) use. Note that date
forms without times are stored as exact integers, so roundoff is
never an issue for them.
from 3 a.m.@: to 4 a.m. At the end of daylight savings time, the
hour from 1 a.m.@: to 2 a.m.@: repeats itself; converting a date/time
form that falls in in this hour results in a time value for the first
-manifestion of that time (@emph{not} the one that occurs one hour later).
+manifestation of that time (@emph{not} the one that occurs one hour later).
If @code{math-daylight-savings-hook} is @code{nil}, then the
daylight savings adjustment is always taken to be zero.
@cindex @code{phi} variable
@cindex Phi, golden ratio
@cindex Golden ratio
-One miscellanous command is shift-@kbd{P} (@code{calc-pi}), which pushes
+One miscellaneous command is shift-@kbd{P} (@code{calc-pi}), which pushes
the value of @c{$\pi$}
@cite{pi} (at the current precision) onto the stack. With the
Hyperbolic flag, it pushes the value @cite{e}, the base of natural logarithms.
are not ``identical.'' Variables are treated like plain symbols without
attached values by the set operations; subtracting the set @samp{[b]}
from @samp{[a, b]} always yields the set @samp{[a]} even though if
-the variables @samp{a} and @samp{b} both equalled 17, you might
+the variables @samp{a} and @samp{b} both equaled 17, you might
expect the answer @samp{[]}.
If a set contains interval forms, then it is assumed to be a set of
is not turned on. (If you work with symbolic mode on, recall that the
@kbd{N} (@code{calc-eval-num}) key is a handy way to reevaluate the
formula on the stack with symbolic mode temporarily off.) Naturally,
-@kbd{a P} can only provide numerical roots if the polynomial coefficents
+@kbd{a P} can only provide numerical roots if the polynomial coefficients
are all numbers (real or complex).
@node Solving Systems of Equations, Decomposing Polynomials, Multiple Solutions, Solving Equations
where it has a minimum). But there @emph{will} be a difference
in the estimated errors of the coefficients reported by @kbd{H a F}.
-Consult any text on statistical modelling of data for a discussion
+Consult any text on statistical modeling of data for a discussion
of where these error estimates come from and how they should be
interpreted.
matches anything else by binding the whole expression to @cite{x} and
zero to @cite{y}. The other operators above work similarly.@refill
-For general miscellanous functions, the default value @code{def}
+For general miscellaneous functions, the default value @code{def}
must be specified. Optional arguments are dropped starting with
the rightmost one during matching. For example, the pattern
@samp{f(opt(a,0), b, opt(c,b))} will match @samp{f(b)}, @samp{f(a,b)},
will be careful to bind @samp{a} to the second argument of @code{f}
before testing the first argument. If Calc had tried to match the
first argument of @code{f} first, the results would have been
-disasterous: Since @code{a} was unbound so far, the pattern @samp{a}
+disastrous: since @code{a} was unbound so far, the pattern @samp{a}
would have matched anything at all, and the pattern @samp{!!!a}
therefore would @emph{not} have matched anything at all!
be made simpler by squaring. For example, applying this rule to
@samp{2 / (sqrt(2) + 3)} yields @samp{6:7 - 2:7 sqrt(2)} (assuming
Symbolic Mode has been enabled to keep the square root from being
-evaulated to a floating-point approximation). This rule is also
+evaluated to a floating-point approximation). This rule is also
useful when working with symbolic complex numbers, e.g.,
@samp{(a + b i) / (c + d i)}.
@pindex calc-permanent-variable
@cindex Storing variables
@cindex Permanent variables
-@cindex @file{.emacs} file, veriables
+@cindex @file{.emacs} file, variables
The @kbd{s p} (@code{calc-permanent-variable}) command saves a
variable's value permanently in your @file{.emacs} file, so that its
value will still be available in future Emacs sessions. You can
@kindex M-# j
@pindex calc-embedded-select
The @kbd{M-# j} (@code{calc-embedded-select}) command provides an
-easy way to operate on assigments. It is just like @kbd{M-# e},
+easy way to operate on assignments. It is just like @kbd{M-# e},
except that if the enabled formula is an assignment, it uses
@kbd{j 2} to select the righthand side. If the enabled formula
is an evaluates-to, it uses @kbd{j 1} to select the lefthand side.
to a suitable range, namely, plus-or-minus @c{$\pi \over 4$}
@cite{pi/4}. Note that each
test, and particularly the first comparison against 7, is designed so
-that small roundoff errors cannnot produce an infinite loop. (Suppose
+that small roundoff errors cannot produce an infinite loop. (Suppose
we compared with @samp{(two-pi)} instead; if due to roundoff problems
the modulo operator ever returned @samp{(two-pi)} exactly, an infinite
recursion could result!) We use modulo only for arguments that will
structure.
There is also a @code{rawnum} symbol, which is a combination of
-@code{raw} (returning a raw Calc object) and @code{num} (signalling
+@code{raw} (returning a raw Calc object) and @code{num} (signaling
an error if that object is not a constant).
You can pass a raw Calc object to @code{calc-eval} in place of a
none of the list elements return a non-@code{nil} value, then an offset
of 0 (zero) is used@footnote{There is however a variable
@code{c-strict-syntax-p} that, when set to non-@code{nil}, will cause an
-error to be signalled in that case. It's now considered obsolete since
+error to be signaled in that case. It's now considered obsolete since
it doesn't work well with some of the alignment functions that now
returns @code{nil} instead of zero to be more usable in lists. You
should therefore leave @code{c-strict-syntax-p} set to @code{nil}.}.
@item
@code{bsd} --- Also known as ``Allman style'' after Eric Allman.
-@cindex Whitesmith style
+@cindex Whitesmiths style
@item
@code{whitesmith} --- Popularized by the examples that came with
Whitesmiths C, an early commercial C compiler.
@findex c-lineup-whitesmith-in-block
@findex lineup-whitesmith-in-block (c-)
@item c-lineup-whitesmith-in-block
-Line up lines inside a block in Whitesmith style. It's done in a way
+Line up lines inside a block in Whitesmiths style. It's done in a way
that works both when the opening brace hangs and when it doesn't. E.g:
@example
@group
however it is recognized that sometimes you need speed and can sacrifice
some accuracy in indentation. The file @file{cc-lobotomy.el} contains
hacks that will ``dumb down'' @ccmode{} in some specific ways, making
-that trade-off of accurancy for speed. I won't go into details of its
+that trade-off of accuracy for speed. I won't go into details of its
use here; you should read the comments at the top of the file, and look
at the variable @code{cc-lobotomy-pith-list} for details.
dangerous, since you will always have the original contents of the file
saved in another file that has the extension @file{.orig}.
Furthermore, if the file is under version control, then you can always back
-out to one of the previous versions (see the section on Version Countrol in
-Emacs manual).
+out to one of the previous versions (see the section on Version Control in
+the Emacs manual).
@code{ediff-patch-file} is careful about versions control: if the file
to be patched is checked in, then Ediff will offer to check it out, because
In other situations, the currently highlighted region might be big and you
might want to reconcile of them interactively.
-All of this can be done with the above comand, @kbd{=}, which
+All of this can be done with the above command, @kbd{=}, which
compares regions within Ediff buffers. Typing @kbd{=} creates a
child Ediff session for comparing regions in buffers A, B, or
C as follows.
@item charset
The contents of the body of the part are to be encoded in the character
-set speficied (@samp{Content-Type}).
+set specified (@samp{Content-Type}).
@item name
Might be used to suggest a file name if the part is to be saved
Glynn Clements, Andrew Csillag, Doug Cutting, Michael DeCorte, Gary
Delp, Matthieu Devin, Eri Ding, Carsten Dominik, Scott Draves, Viktor
Dukhovni, John Eaton, Rolf Ebert, Stephen Eglen, Torbj@"orn Einarsson,
-Tsugumoto Enami, Hans Henrik Eriksen, Michael Ernst, Ata Etemadi,
-Frederick Farnback, Fred Fish, Karl Fogel, Gary Foster, Noah Friedman,
+Tsugutomo Enami, Hans Henrik Eriksen, Michael Ernst, Ata Etemadi,
+Frederick Farnbach, Fred Fish, Karl Fogel, Gary Foster, Noah Friedman,
Keith Gabryelski, Kevin Gallagher, Kevin Gallo, Howard Gayle, Stephen
Gildea, David Gillespie, Bob Glickstein, Boris Goldowsky, Michelangelo
Grigni, Michael Gschwind, Henry Guillaume, Doug Gwyn, Ken'ichi Handa,
\input texinfo @c -*-texinfo-*-
-@c "@(#)$Name: $:$Id: eshell.texi,v 1.13 2002/06/17 11:50:12 kai Exp $"
+@c "@(#)$Name: $:$Id: eshell.texi,v 1.14 2002/06/17 15:55:51 kai Exp $"
@c Documentation for Eshell: The Emacs Shell.
@c Copyright (C) 1999, 2000 Free Software Foundation, Inc.
@c your option) any later version.
@c GNU Emacs is distributed in the hope that it will be useful, but
-@c WITHOUT ANY WARRANTY; without even the implied warraonty of
+@c WITHOUT ANY WARRANTY; without even the implied warranty of
@c MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
@c General Public License for more details.
@item Using C-p and C-n with rebind gets into a locked state
-This happened a few times in Emacs 21, but has been unreproducable
+This happened a few times in Emacs 21, but has been unreproducible
since.
@item If an interactive process is currently running, @kbd{M-!} doesn't work
This would allow for an ``output translators'', that take a function to
modify output with, and a target. Devise a syntax that works well with
-pipes, and can accomodate multiple functions (i.e., @samp{>'(upcase
+pipes, and can accommodate multiple functions (i.e., @samp{>'(upcase
regexp-quote)} or @samp{>'upcase}).
@item Allow Eshell to read/write to/from standard input and output
@cindex Toolbar support
Emacs 21 features a thorough rewrite of the display engine. The new
display engine supports variable-size fonts, images, and can play sounds
-on platforms which support that. As a result, the visual appearence of
+on platforms which support that. As a result, the visual appearance of
Emacs, when it runs on a windowed display, is much more reminiscent of
modern GUI programs, and includes 3D widgets (used for the mode line and
the scroll bars), a configurable and extensible toolbar, tooltips
@node Scrolling only one line, Replacing highlighted text, Turning on syntax highlighting, Common requests
@section How can I force Emacs to scroll only one line when I move past the bottom of the screen?
@cindex Scrolling only one line
-@cindex Reducing the increment when scrollng
+@cindex Reducing the increment when scrolling
Place the following Lisp form in your @file{.emacs} file:
@section How can I replace highlighted text with what I type?
@cindex @code{delete-selection-mode}
@cindex Replacing highlighted text
-@cindex Highlighing and replacing text
+@cindex Highlighting and replacing text
Use @code{delete-selection-mode}, which you can start automatically by
placing the following Lisp form in your @file{.emacs} file:
@cindex Snail mail, ordering Emacs via
@cindex Postal service, ordering Emacs via
@cindex Distribution, retrieving Emacs
-@cindex Internet, retreiving from
+@cindex Internet, retrieving from
Look in the files @file{etc/DISTRIB} and @file{etc/FTP} for information
on nearby archive sites and @file{etc/ORDERS} for mail orders. If you
@vindex vc-cvs-global-switches
The variable @code{vc-cvs-global-switches} should be a string
-specifyng switches to pass to CVS for all CVS operations.
+specifying switches to pass to CVS for all CVS operations.
When @code{vc-cvs-stay-local} is @code{t}, VC also makes local
version backups, so that simple diff and revert operations are
than @code{nil} (which it is, by default), the Emacs functions
@code{scroll-up} and @code{scroll-down} will perform a
@code{forms-next-record} and @code{forms-prev-record} when in forms
-mode. So you can use your favourite page commands to page through the
+mode. So you can use your favorite page commands to page through the
data file.
@vindex forms-forms-jump
* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
* Article Date:: Grumble, UT!
* Article Signature:: What is a signature?
-* Article Miscellania:: Various other stuff.
+* Article Miscellanea:: Various other stuff.
Alternative Approaches
* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
* Article Date:: Grumble, UT!
* Article Signature:: What is a signature?
-* Article Miscellania:: Various other stuff.
+* Article Miscellanea:: Various other stuff.
@end menu
signature after all.
-@node Article Miscellania
-@subsection Article Miscellania
+@node Article Miscellanea
+@subsection Article Miscellanea
@table @kbd
@item A t
@vindex nntp-server-opened-hook
@cindex @sc{mode reader}
@cindex authinfo
-@cindex authentification
-@cindex nntp authentification
+@cindex authentication
+@cindex nntp authentication
@findex nntp-send-authinfo
@findex nntp-send-mode-reader
is run after a connection has been made. It can be used to send
@findex nntp-open-ssl-stream
@item nntp-open-ssl-stream
Opens a connection to a server over a @dfn{secure} channel. To use this
-you must have SSLay installed
+you must have SSLeay installed
(@uref{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also need
@file{ssl.el} (from the W3 distribution, for instance). You then
define a server as follows:
(,gnus-del-mark . -15)))
@end lisp
-This is the default value. If you have adaption on words enabled, every
+This is the default value. If you adapt on words, every
word that appears in subjects of articles marked with
@code{gnus-read-mark} will result in a score rule that increase the
score with 30 points.
* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendonitis in ten easy steps!
+* Buttons:: Get tendinitis in ten easy steps!
* Daemons:: Gnus can do things behind your back.
* NoCeM:: How to avoid spam and other fatty foods.
* Undo:: Some actions can be undone.
been added.
@item
-@code{nndoc} was rewritten to be easily extendable (@pxref{Document
+@code{nndoc} was rewritten to be easily extensible (@pxref{Document
Server Internals}).
@item
mail before saving the mail (@pxref{Washing Mail}).
@item
-Emphasized text can be properly fontisized:
+Emphasized text can be properly fontified:
@end itemize
@cindex ephemeral groups
Most groups store data on what articles you have read. @dfn{Ephemeral}
groups are groups that will have no data stored---when you exit the
-group, it'll disappear into the aether.
+group, it'll disappear into the ether.
@item solid groups
@cindex solid groups
method exists in several classes, IDLWAVE queries for the class of the
object, unless the class is already known through a text property on the
@samp{->} operator (@pxref{Object Method Completion and Class
-Ambiguity}), or by having been explicity included in the call
+Ambiguity}), or by having been explicitly included in the call
(e.g. @code{a->myclass::Foo}).
@cindex Calling sequences
@emph{chaining}, and is characterized by chained method calls like
@w{@code{self->MySuperClass::SetProperty,_EXTRA=e}}.
-IDLWAVE can accomodate this special synergy between class and keyword
+IDLWAVE can accommodate this special synergy between class and keyword
inheritance: if @code{_EXTRA} or @code{_REF_EXTRA} are detected among a
method's keyword parameters, all keywords of superclass versions of the
method being considered are included in completion. The completion
@cindex Modification timestamp
@cindex Header, for file documentation
@cindex Timestamp, in doc header.
-@cindex Changelog, in doc header.
+@cindex ChangeLog, in doc header.
@kindex C-c C-h
@kindex C-c C-m
or while composing a long command in the IDLWAVE shell. In the latter
case, the command is sent to the shell and its output is visible, but
point remains unmoved in the command being composed --- you can inspect
-the contituents of a command you're building without interrupting the
+the constituents of a command you're building without interrupting the
process of building it! You can even print arbitrary expressions from
older input or output further up in the shell window --- any expression,
variable, number, or function you see can be examined.
@code{\section}, @code{\subsection}, @code{\subsubsection},
@code{\eqno}, @code{\label}, @code{\ref}, @code{\cite},
@code{\bibitem}, @code{\part}, @code{\appendix}, @code{\entry},
-@code{\index}, @code{\def}, @code{\newcomand}, @code{\renewcommand},
+@code{\index}, @code{\def}, @code{\newcommand}, @code{\renewcommand},
@code{\newenvironment} or @code{\renewenvironment} is a tag.@refill
Other commands can make tags as well, if you specify them in the
is @emph{not} an abbreviation of the English word ``response'', but is
Latin, and means ``in response to''. Some illiterate nincompoops have
failed to grasp this fact, and have ``internationalized'' their software
-to use abonimations like @samp{Aw: } (``antwort'') or @samp{Sv: }
+to use abominations like @samp{Aw: } (``antwort'') or @samp{Sv: }
(``svar'') instead, which is meaningless and evil. However, you may
have to deal with users that use these evil tools, in which case you may
set this variable to a regexp that matches these prefixes. Myself, I
\input texinfo @c -*-texinfo-*-
-@c "@(#)$Name: $:$Id: pcl-cvs.texi,v 1.14 2002/02/13 22:30:34 monnier Exp $"
+@c "@(#)$Name: $:$Id: pcl-cvs.texi,v 1.15 2002/04/09 18:41:56 monnier Exp $"
@c Documentation for the GNU Emacs CVS mode.
@c Copyright (C) 1991,92,93,94,95,96,97,98,99,2000, 2001 Free Software Foundation, Inc.
@file{pcl-cvs-xemacs.el}.@refill
@item
-Leif Lonnblad contributed RCVS support (since superceded by the new
+Leif Lonnblad contributed RCVS support (since superseded by the new
remote CVS support).
@item
@samp{Einstein&&Bose} will match all articles which mention
Bose-Einstein condensation, or which are co-authored by Bose and
Einstein. When entering the regular expression, you can complete on
-known citation keys. RefTeX also offeres a default when prompting for a
+known citation keys. RefTeX also offers a default when prompting for a
regular expression. This default is the word before the cursor or the
-word before the current @samp{\cite} comand. Sometimes this may be a
+word before the current @samp{\cite} command. Sometimes this may be a
good search key.@refill
@cindex @code{\bibliography}
expression, scans the buffers with BibTeX entries (taken from the
@code{\bibliography} command or a @code{thebibliography} environment)
and offers the matching entries for selection. The selected entry is
-formated according to @code{reftex-cite-format} and inserted into the
+formatted according to @code{reftex-cite-format} and inserted into the
buffer.@refill @*
When called with one or two @kbd{C-u} prefixes, first rescans the
document. When called with a numeric prefix, make that many citations.
New key binding @kbd{t} in the @file{*toc*} buffer to change this
setting.@refill
@item
-RefTeX maintaines an @file{Index Phrases} file in which phrases can be
+RefTeX maintains an @file{Index Phrases} file in which phrases can be
collected. When the document is ready, RefTeX can search all
these phrases and assist indexing all matches.@refill
@item
@table @asis
@item the symbol @code{continue}
This tells Regi to continue processing entries after a match, instead of
-reseting the frame and moving @samp{point}. In this way, lines of text
+resetting the frame and moving @samp{point}. In this way, lines of text
can have multiple matches, but you have to be careful to avoid entering
infinite loops.
@file{/usr/info/dir}. Copy the top of this file down to the first
occurrence of `* Menu' including that line plus one more blank line,
to your working directory @file{texi/dir}, or use the sample provided
-in the @file{texi} directroy of this distribution. See
+in the @file{texi} directory of this distribution. See
@file{texi/dir_sample}
Once a @file{dir} file is in place, this command will make the entry.
@cindex methods, external transfer
@cindex methods, out-of-band
Loading or saving a remote file requires that the content of the file
-be transfered between the two machines. The content of the file can be
-transfered over the same connection used to log in to the remote
-machine or the file can be transfered through another connection using
+be transferred between the two machines. The content of the file can be
+transferred over the same connection used to log in to the remote
+machine or the file can be transferred through another connection using
a remote copy program such as @command{rcp}, @command{scp} or
@command{rsync}. The former are called @dfn{inline methods}, the
latter are called @dfn{out-of-band methods} or @dfn{external transfer
that use the @command{ssh1} and @command{ssh2} commands explicitly. If
you don't know what these are, you do not need these options.
-All the methods based on @command{ssh} have an additional kludgy
+All the methods based on @command{ssh} have an additional kludgey
feature: you can specify a host name which looks like @file{host#42}
(the real host name, then a hash sign, then a port number). This
means to connect to the given host but to also pass @code{-p 42} as
session can begin to absorb the advantage that the lack of encoding and
decoding presents.
-All the @command{ssh} based methods support the kludgy @samp{-p}
+All the @command{ssh} based methods support the kludgey @samp{-p}
feature where you can specify a port number to connect to in the host
name. For example, the host name @file{host#42} tells Tramp to
specify @samp{-p 42} in the argument list for @command{ssh}.
\input texinfo @c -*-texinfo-*-
-@c $Id: woman.texi,v 1.9 2002/07/01 08:05:00 rms Exp $
+@c $Id: woman.texi,v 1.10 2002/07/01 08:06:37 rms Exp $
@c %**start of header
@setfilename ../info/woman
@settitle WoMan: Browse Unix Manual Pages ``W.O. (without) Man''
develop WoMan to take advantage of developments in Emacs itself. At
present, WoMan uses several display faces to support bold and italic
text, to indicate other fonts, etc. The default faces are also
-coloured, but the choice of faces is customizable. WoMan provides menu
+colored, but the choice of faces is customizable. WoMan provides menu
support for navigation and mouse support for following references, in
addition to the navigation facilities provided by @code{man} mode.
WoMan has (this) texinfo documentation!
@var{version} is your Emacs version), provided you have write access to
it. If you use a directory that is not included by default in your
Emacs load path then you need to add something like this to your
-@file{.emacs} initialisation file:
+@file{.emacs} initialization file:
@lisp
(add-to-list 'load-path "my-lisp")
@heading Setup
Setup that is either necessary or desirable consists of adding a small
-amount of Emacs Lisp code to your @file{.emacs} initialisation file. It
+amount of Emacs Lisp code to your @file{.emacs} initialization file. It
may be necessary (or at least convenient) to make WoMan autoload (if you
are not running GNU Emacs 21 or later) and to set the search path used
by the @code{woman} interface. You may also find it convenient to make
(By default, WoMan will automatically define the dired keys @kbd{W} and
@kbd{w} when it loads, but only if they are not already defined. This
-behaviour is controlled by the user option @code{woman-dired-keys}.
+behavior is controlled by the user option @code{woman-dired-keys}.
Note that the @code{dired-x} (dired extra) package binds
@code{dired-copy-filename-as-kill} to the key @kbd{w}, although @kbd{W}
appears to be unused. The @code{dired-x} package will over-write the
If you really want to square the man-woman circle then you can! If you
run the GNU command interpreter @code{bash} then you might care to
define the following @code{bash} function in your @code{bash}
-initialisation file @file{.bashrc}:
+initialization file @file{.bashrc}:
@example
man() @{ gnudoit -q '(raise-frame (selected-frame)) (woman' \"$1\" ')' ; @}
@item woman-bold-headings
A boolean value. If non-@code{nil} then embolden section and subsection
headings. Default is @code{t}. [Heading emboldening is @emph{not} standard
-@code{man} behaviour.]
+@code{man} behavior.]
@item woman-ignore
A boolean value. If non-@code{nil} then unrecognised requests etc. are
-ignored. Default is @code{t}. This gives the standard @code{ROFF} behaviour.
+ignored. Default is @code{t}. This gives the standard @code{ROFF} behavior.
If @code{nil} then they are left in the buffer, which may aid debugging.
@item woman-preserve-ascii
@item woman-fontify
A boolean value. If non-@code{nil} then WoMan assumes that face support is
available. It defaults to a non-@code{nil} value if the display supports
-either colours or different fonts.
+either colors or different fonts.
@item woman-italic-face
Face for italic font in man pages. Default: italic, underlined,
@cindex log buffer
@cindex buffer, log
-This is modelled on the Emacs byte-compiler. It logs all files
+This is modeled on the Emacs byte-compiler. It logs all files
formatted by WoMan and the time taken. If WoMan finds anything that it
cannot handle then it writes a warning to this buffer. If the variable
@code{woman-show-log} is non-@code{nil} (by default it is @code{nil}) then
projects / emacs.git / commitdiff