(register-definition-prefixes "cal-persia" '("calendar-persian-" "diary-persian-date"))
-\f
-;;; Generated autoloads from calendar/cal-tex.el
-
-(register-definition-prefixes "cal-tex" '("cal-tex-"))
-
\f
;;; Generated autoloads from calendar/cal-x.el
`native-compile-target-directory' is non-nil. If the environment
variable \"NATIVE_DISABLED\" is set, only byte compile.")
(autoload 'native-compile-prune-cache "comp" "\
-Remove .eln files that aren't applicable to the current Emacs invocation." t)
+Remove *.eln files that aren't usable by the current Emacs build.
+
+This command removes all the *.eln files in `native-comp-eln-load-path'
+which are incompatible with the Emacs session in which you invoke this
+command. This includes the *.eln files compiled by all the Emacs
+sessions where `comp-native-version-dir' had a value different from the
+current session.
+
+Note that this command does not prune the *.eln files in the last
+directory in `native-comp-eln-load-path', which holds *.eln files
+compiled during the Emacs build process." t)
(register-definition-prefixes "comp" '("comp-" "native-comp" "no-native-compile"))
\f
(fn FILES &optional RECURSIVELY LOAD SELECTOR)")
(register-definition-prefixes "comp-run" '("comp-" "native-"))
-\f
-;;; Generated autoloads from vc/compare-w.el
-
-(autoload 'compare-windows "compare-w" "\
-Compare text in current window with text in another window.
-The option `compare-windows-get-window-function' defines how
-to get another window.
-
-Compares the text starting at point in each window,
-moving over text in each one as far as they match.
-
-This command pushes the mark in each window
-at the prior location of point in that window.
-If both windows display the same buffer,
-the mark is pushed twice in that buffer:
-first in the other window, then in the selected window.
-
-A prefix arg IGNORE-WHITESPACE, means reverse the value of variable
-`compare-ignore-whitespace'. If `compare-ignore-whitespace' is
-nil, then a prefix arg means ignore changes in whitespace. If
-`compare-ignore-whitespace' is non-nil, then a prefix arg means
-don't ignore changes in whitespace. The variable
-`compare-windows-whitespace' controls how whitespace is skipped.
-If `compare-ignore-case' is non-nil, changes in case are also
-ignored.
-
-If `compare-windows-sync' is non-nil, then successive calls of
-this command work in interlaced mode:
-on first call it advances points to the next difference,
-on second call it synchronizes points by skipping the difference,
-on third call it again advances points to the next difference and so on.
-
-(fn IGNORE-WHITESPACE)" t)
-(register-definition-prefixes "compare-w" '("compare-"))
-
\f
;;; Generated autoloads from emacs-lisp/compat.el
(autoload 'describe-current-display-table "disp-table" "\
Describe the display table in use in the selected window and buffer." t)
(autoload 'standard-display-unicode-special-glyphs "disp-table" "\
-Display some glyps using Unicode characters.
+Display some glyphs using Unicode characters.
The glyphs being changed by this function are `vertical-border',
`box-vertical',`box-horizontal', `box-down-right', `box-down-left',
`box-up-right', `box-up-left',`box-double-vertical',
(autoload 'eww-mode "eww" "\
Mode for browsing the web.
-\\{eww-mode-map}
-
(fn)" t)
(autoload 'eww-browse-url "eww" "\
Ask the EWW browser to load URL.
(autoload 'turn-off-flyspell "flyspell" "\
Unconditionally turn off Flyspell mode.")
(make-obsolete 'turn-off-flyspell 'flyspell-mode "31.1")
-(register-definition-prefixes "flyspell" '("flyspell-" "mail-mode-flyspell-verify" "make-flyspell-overlay" "sgml-mode-flyspell-verify" "tex"))
+(register-definition-prefixes "flyspell" '("flyspell-" "mail-mode-flyspell-verify" "make-flyspell-overlay" "sgml-mode-flyspell-verify" "texinfo-mode-flyspell-verify"))
\f
;;; Generated autoloads from foldout.el
(defalias 'name-last-kbd-macro #'kmacro-name-last-macro)
(autoload 'insert-kbd-macro "macros" "\
Insert in buffer the definition of kbd macro MACRONAME, as Lisp code.
-MACRONAME should be a symbol.
+MACRONAME should be a symbol; if none is given, the function inserts
+the definition of `last-kdb-macro'.
Optional second arg KEYS means also record the keys it is on
(this is the prefix argument, when calling interactively).
(fn)" t)
(register-definition-prefixes "make-mode" '("makefile-"))
-\f
-;;; Generated autoloads from textmodes/makeinfo.el
-
-(register-definition-prefixes "makeinfo" '("makeinfo-"))
-
\f
;;; Generated autoloads from man.el
Save the result in `project-list-file' if the list of projects
has changed, and NO-WRITE is nil.
-(fn PR &optional NO-WRITE)")
+(fn PR &optional NO-WRITE)" t)
(autoload 'project-forget-project "project" "\
Remove directory PROJECT-ROOT from the project list.
PROJECT-ROOT is the root directory of a known project listed in
(fn &optional ARG)" t)
(register-definition-prefixes "refill" '("refill-"))
-\f
-;;; Generated autoloads from textmodes/reftex.el
-
-(autoload 'reftex-citation "reftex-cite" nil t)
-(autoload 'reftex-all-document-files "reftex-parse")
-(autoload 'reftex-isearch-minor-mode "reftex-global" nil t)
-(autoload 'reftex-index-phrases-mode "reftex-index" nil t)
-(autoload 'turn-on-reftex "reftex" "\
-Turn on RefTeX mode.")
-(autoload 'reftex-mode "reftex" "\
-Minor mode with distinct support for \\label, \\ref and \\cite in LaTeX.
-
-\\<reftex-mode-map>A Table of Contents of the entire (multifile) document with browsing
-capabilities is available with `\\[reftex-toc]'.
-
-Labels can be created with `\\[reftex-label]' and referenced with `\\[reftex-reference]'.
-When referencing, you get a menu with all labels of a given type and
-context of the label definition. The selected label is inserted as a
-\\ref macro.
-
-Citations can be made with `\\[reftex-citation]' which will use a regular expression
-to pull out a *formatted* list of articles from your BibTeX
-database. The selected citation is inserted as a \\cite macro.
-
-Index entries can be made with `\\[reftex-index-selection-or-word]' which indexes the word at point
-or the current selection. More general index entries are created with
-`\\[reftex-index]'. `\\[reftex-display-index]' displays the compiled index.
-
-Most command have help available on the fly. This help is accessed by
-pressing `?' to any prompt mentioning this feature.
-
-Extensive documentation about RefTeX is available in Info format.
-You can view this information with `\\[reftex-info]'.
-
-\\{reftex-mode-map}
-Under X, these and other functions will also be available as `Ref' menu
-on the menu bar.
-
-------------------------------------------------------------------------------
-
-This is a minor mode. If called interactively, toggle the `Reftex mode'
-mode. If the prefix argument is positive, enable the mode, and if it is
-zero or negative, disable the mode.
-
-If called from Lisp, toggle the mode if ARG is `toggle'. Enable the
-mode if ARG is nil, omitted, or is a positive number. Disable the mode
-if ARG is a negative number.
-
-To check whether the minor mode is enabled in the current buffer,
-evaluate `reftex-mode'.
-
-The mode's hook is called both when the mode is enabled and when it is
-disabled.
-
-(fn &optional ARG)" t)
-(autoload 'reftex-reset-scanning-information "reftex" "\
-Reset the symbols containing information from buffer scanning.
-This enforces rescanning the buffer on next use.")
-(register-definition-prefixes "reftex" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-auc.el
-
-(register-definition-prefixes "reftex-auc" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-cite.el
-
-(register-definition-prefixes "reftex-cite" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-dcr.el
-
-(register-definition-prefixes "reftex-dcr" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-global.el
-
-(register-definition-prefixes "reftex-global" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-index.el
-
-(register-definition-prefixes "reftex-index" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-parse.el
-
-(register-definition-prefixes "reftex-parse" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-ref.el
-
-(register-definition-prefixes "reftex-ref" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-sel.el
-
-(register-definition-prefixes "reftex-sel" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-toc.el
-
-(register-definition-prefixes "reftex-toc" '("reftex-"))
-
-\f
-;;; Generated autoloads from textmodes/reftex-vars.el
-
-(put 'reftex-vref-is-default 'safe-local-variable (lambda (x) (or (stringp x) (symbolp x))))
-(put 'reftex-fref-is-default 'safe-local-variable (lambda (x) (or (stringp x) (symbolp x))))
-(put 'reftex-level-indent 'safe-local-variable 'integerp)
-(put 'reftex-guess-label-type 'safe-local-variable #'booleanp)
-(register-definition-prefixes "reftex-vars" '("reftex-"))
-
\f
;;; Generated autoloads from emacs-lisp/regexp-opt.el
(fn SIZE)")
(register-definition-prefixes "ring" '("ring-"))
+\f
+;;; Generated autoloads from ring-bell-fns.el
+
+(autoload 'flash-face-bell-function "ring-bell-fns" "\
+Indicate ringing the bell by flashing some faces.
+Intended to be used in `ring-bell-function'.")
+(autoload 'flash-echo-area-bell-function "ring-bell-fns" "\
+Indicate ringing the bell by flashing the echo area.
+Intended to be used in `ring-bell-function'.")
+(register-definition-prefixes "ring-bell-fns" '("flash-face-"))
+
\f
;;; Generated autoloads from mail/rmail.el
(autoload 'string-edit "string-edit" "\
Switch to a new buffer to edit STRING.
-Call MAJOR-MODE (defaulting to `string-edit-mode') to set up the new
+Call MAJOR-MODE-SYM (defaulting to `string-edit-mode') to set up the new
buffer, and insert PROMPT (defaulting to nothing) at the start of the
buffer.
Also see `read-string-from-buffer'.
-(fn PROMPT STRING SUCCESS-CALLBACK &key ABORT-CALLBACK MAJOR-MODE READ)")
+(fn PROMPT STRING SUCCESS-CALLBACK &key ABORT-CALLBACK MAJOR-MODE-SYM READ)")
(autoload 'read-string-from-buffer "string-edit" "\
Switch to a new buffer to edit STRING in a recursive edit.
The user finishes editing with \\<string-edit-mode-map>\\[string-edit-done], or aborts with \\<string-edit-mode-map>\\[string-edit-abort]).
\\[tetris-move-bottom] Drop the shape to the bottom of the playing area" t)
(register-definition-prefixes "tetris" '("tetris-"))
-\f
-;;; Generated autoloads from textmodes/tex-mode.el
-
-(defvar tex-shell-file-name nil "\
-If non-nil, the shell file name to run in the subshell used to run TeX.")
-(custom-autoload 'tex-shell-file-name "tex-mode" t)
-(defvar tex-directory "." "\
-Directory in which temporary files are written.
-You can make this `/tmp' if your TEXINPUTS has no relative directories in it
-and you don't try to apply \\[tex-region] or \\[tex-buffer] when there are
-`\\input' commands with relative directories.")
-(custom-autoload 'tex-directory "tex-mode" t)
-(defvar tex-first-line-header-regexp nil "\
-Regexp for matching a first line which `tex-region' should include.
-If this is non-nil, it should be a regular expression string;
-if it matches the first line of the file,
-`tex-region' always includes the first line in the TeX run.")
-(custom-autoload 'tex-first-line-header-regexp "tex-mode" t)
-(defvar tex-main-file nil "\
-The main TeX source file which includes this buffer's file.
-The command `tex-file' runs TeX on the file specified by `tex-main-file'
-if the variable is non-nil.")
-(custom-autoload 'tex-main-file "tex-mode" t)
-(defvar tex-offer-save t "\
-If non-nil, ask about saving modified buffers before \\[tex-file] is run.")
-(custom-autoload 'tex-offer-save "tex-mode" t)
-(defvar tex-run-command "tex" "\
-Command used to run TeX subjob.
-TeX Mode sets `tex-command' to this string.
-See the documentation of that variable.")
-(custom-autoload 'tex-run-command "tex-mode" t)
-(defvar latex-run-command "latex" "\
-Command used to run LaTeX subjob.
-LaTeX Mode sets `tex-command' to this string.
-See the documentation of that variable.")
-(custom-autoload 'latex-run-command "tex-mode" t)
-(defvar slitex-run-command "slitex" "\
-Command used to run SliTeX subjob.
-SliTeX Mode sets `tex-command' to this string.
-See the documentation of that variable.")
-(custom-autoload 'slitex-run-command "tex-mode" t)
-(defvar tex-start-options "" "\
-TeX options to use when starting TeX.
-These immediately precede the commands in `tex-start-commands'
-and the input file name, with no separating space and are not shell-quoted.
-If nil, TeX runs with no options. See the documentation of `tex-command'.")
-(custom-autoload 'tex-start-options "tex-mode" t)
-(defvar tex-start-commands "\\nonstopmode\\input" "\
-TeX commands to use when starting TeX.
-They are shell-quoted and precede the input file name, with a separating space.
-If nil, no commands are used. See the documentation of `tex-command'.")
-(custom-autoload 'tex-start-commands "tex-mode" t)
-(defvar latex-block-names nil "\
-User defined LaTeX block names.
-Combined with `latex-standard-block-names' for minibuffer completion.")
-(custom-autoload 'latex-block-names "tex-mode" t)
-(defvar tex-bibtex-command "bibtex" "\
-Command used by `tex-bibtex-file' to gather bibliographic data.
-If this string contains an asterisk (`*'), that is replaced by the file name;
-otherwise, the file name, preceded by blank, is added at the end.")
-(custom-autoload 'tex-bibtex-command "tex-mode" t)
-(defvar tex-dvi-print-command "lpr -d" "\
-Command used by \\[tex-print] to print a .dvi file.
-If this string contains an asterisk (`*'), that is replaced by the file name;
-otherwise, the file name, preceded by blank, is added at the end.")
-(custom-autoload 'tex-dvi-print-command "tex-mode" t)
-(defvar tex-alt-dvi-print-command "lpr -d" "\
-Command used by \\[tex-print] with a prefix arg to print a .dvi file.
-If this string contains an asterisk (`*'), that is replaced by the file name;
-otherwise, the file name, preceded by blank, is added at the end.
-
-If two printers are not enough of a choice, you can set the variable
-`tex-alt-dvi-print-command' to an expression that asks what you want;
-for example,
-
- (setq tex-alt-dvi-print-command
- \\='(format \"lpr -P%s\" (read-string \"Use printer: \")))
-
-would tell \\[tex-print] with a prefix argument to ask you which printer to
-use.")
-(custom-autoload 'tex-alt-dvi-print-command "tex-mode" t)
-(defvar tex-dvi-view-command (cond ((eq window-system 'x) "xdvi") ((eq window-system 'w32) "yap") (t "dvi2tty * | cat -s")) "\
-Command used by \\[tex-view] to display a `.dvi' file.
-If this string contains an asterisk (`*'), that is replaced by the file name;
-otherwise, the file name, preceded by a space, is added at the end.
-
-For backwards-compatibility, the value can also be a form, in which case
-it is evaluated to get the command to use. This is now obsolete, and
-will lead to a warning. Set it to a string instead.")
-(custom-autoload 'tex-dvi-view-command "tex-mode" t)
-(defvar tex-show-queue-command "lpq" "\
-Command used by \\[tex-show-print-queue] to show the print queue.
-Should show the queue(s) that \\[tex-print] puts jobs on.")
-(custom-autoload 'tex-show-queue-command "tex-mode" t)
-(defvar tex-default-mode #'latex-mode "\
-Mode to enter for a new file that might be either TeX or LaTeX.
-This variable is used when it can't be determined whether the file
-is plain TeX or LaTeX or what because the file contains no commands.
-Normally set to either `plain-tex-mode' or `latex-mode'.")
-(custom-autoload 'tex-default-mode "tex-mode" t)
-(defvar tex-open-quote "``" "\
-String inserted by typing \\[tex-insert-quote] to open a quotation.")
-(custom-autoload 'tex-open-quote "tex-mode" t)
-(defvar tex-close-quote "''" "\
-String inserted by typing \\[tex-insert-quote] to close a quotation.")
-(custom-autoload 'tex-close-quote "tex-mode" t)
-(autoload 'tex-mode "tex-mode" "\
-Major mode for editing files of input for TeX, LaTeX, or SliTeX.
-This is the shared parent mode of several submodes.
-Tries to determine (by looking at the beginning of the file) whether
-this file is for plain TeX, LaTeX, or SliTeX and calls `plain-tex-mode',
-`latex-mode', or `slitex-mode', accordingly. If it cannot be determined,
-such as if there are no commands in the file, the value of `tex-default-mode'
-says which mode to use.
-
-(fn)" t)
- (add-to-list 'major-mode-remap-defaults '(TeX-mode . tex-mode))
- (add-to-list 'major-mode-remap-defaults '(plain-TeX-mode . plain-tex-mode))
- (add-to-list 'major-mode-remap-defaults '(LaTeX-mode . latex-mode))
- (defalias 'TeX-mode #'tex-mode)
- (defalias 'plain-TeX-mode #'plain-tex-mode)
- (defalias 'LaTeX-mode #'latex-mode)
-(autoload 'plain-tex-mode "tex-mode" "\
-Major mode for editing files of input for plain TeX.
-Makes $ and } display the characters they match.
-Makes \" insert \\=`\\=` when it seems to be the beginning of a quotation,
-and \\='\\=' when it appears to be the end; it inserts \" only after a \\.
-
-Use \\[tex-region] to run TeX on the current region, plus a \"header\"
-copied from the top of the file (containing macro definitions, etc.),
-running TeX under a special subshell. \\[tex-buffer] does the whole buffer.
-\\[tex-file] saves the buffer and then processes the file.
-\\[tex-print] prints the .dvi file made by any of these.
-\\[tex-view] previews the .dvi file made by any of these.
-\\[tex-bibtex-file] runs bibtex on the file of the current buffer.
-
-Use \\[tex-validate-buffer] to check buffer for paragraphs containing
-mismatched $'s or braces.
-
-Special commands:
-\\{plain-tex-mode-map}
-
-Mode variables:
-tex-run-command
- Command string used by \\[tex-region] or \\[tex-buffer].
-tex-directory
- Directory in which to create temporary files for TeX jobs
- run by \\[tex-region] or \\[tex-buffer].
-tex-dvi-print-command
- Command string used by \\[tex-print] to print a .dvi file.
-tex-alt-dvi-print-command
- Alternative command string used by \\[tex-print] (when given a prefix
- argument) to print a .dvi file.
-tex-dvi-view-command
- Command string used by \\[tex-view] to preview a .dvi file.
-tex-show-queue-command
- Command string used by \\[tex-show-print-queue] to show the print
- queue that \\[tex-print] put your job on.
-
-Entering Plain-tex mode runs the hook `text-mode-hook', then the hook
-`tex-mode-hook', and finally the hook `plain-tex-mode-hook'. When the
-special subshell is initiated, the hook `tex-shell-hook' is run.
-
-(fn)" t)
-(autoload 'latex-mode "tex-mode" "\
-Major mode for editing files of input for LaTeX.
-Makes $ and } display the characters they match.
-Makes \" insert \\=`\\=` when it seems to be the beginning of a quotation,
-and \\='\\=' when it appears to be the end; it inserts \" only after a \\.
-
-Use \\[tex-region] to run LaTeX on the current region, plus the preamble
-copied from the top of the file (containing \\documentstyle, etc.),
-running LaTeX under a special subshell. \\[tex-buffer] does the whole buffer.
-\\[tex-file] saves the buffer and then processes the file.
-\\[tex-print] prints the .dvi file made by any of these.
-\\[tex-view] previews the .dvi file made by any of these.
-\\[tex-bibtex-file] runs bibtex on the file of the current buffer.
-
-Use \\[tex-validate-buffer] to check buffer for paragraphs containing
-mismatched $'s or braces.
-
-Special commands:
-\\{latex-mode-map}
-
-Mode variables:
-latex-run-command
- Command string used by \\[tex-region] or \\[tex-buffer].
-tex-directory
- Directory in which to create temporary files for LaTeX jobs
- run by \\[tex-region] or \\[tex-buffer].
-tex-dvi-print-command
- Command string used by \\[tex-print] to print a .dvi file.
-tex-alt-dvi-print-command
- Alternative command string used by \\[tex-print] (when given a prefix
- argument) to print a .dvi file.
-tex-dvi-view-command
- Command string used by \\[tex-view] to preview a .dvi file.
-tex-show-queue-command
- Command string used by \\[tex-show-print-queue] to show the print
- queue that \\[tex-print] put your job on.
-
-Entering Latex mode runs the hook `text-mode-hook', then
-`tex-mode-hook', and finally `latex-mode-hook'. When the special
-subshell is initiated, `tex-shell-hook' is run.
-
-(fn)" t)
-(autoload 'slitex-mode "tex-mode" "\
-Major mode for editing files of input for SliTeX.
-Makes $ and } display the characters they match.
-Makes \" insert \\=`\\=` when it seems to be the beginning of a quotation,
-and \\='\\=' when it appears to be the end; it inserts \" only after a \\.
-
-Use \\[tex-region] to run SliTeX on the current region, plus the preamble
-copied from the top of the file (containing \\documentstyle, etc.),
-running SliTeX under a special subshell. \\[tex-buffer] does the whole buffer.
-\\[tex-file] saves the buffer and then processes the file.
-\\[tex-print] prints the .dvi file made by any of these.
-\\[tex-view] previews the .dvi file made by any of these.
-\\[tex-bibtex-file] runs bibtex on the file of the current buffer.
-
-Use \\[tex-validate-buffer] to check buffer for paragraphs containing
-mismatched $'s or braces.
-
-Special commands:
-\\{slitex-mode-map}
-
-Mode variables:
-slitex-run-command
- Command string used by \\[tex-region] or \\[tex-buffer].
-tex-directory
- Directory in which to create temporary files for SliTeX jobs
- run by \\[tex-region] or \\[tex-buffer].
-tex-dvi-print-command
- Command string used by \\[tex-print] to print a .dvi file.
-tex-alt-dvi-print-command
- Alternative command string used by \\[tex-print] (when given a prefix
- argument) to print a .dvi file.
-tex-dvi-view-command
- Command string used by \\[tex-view] to preview a .dvi file.
-tex-show-queue-command
- Command string used by \\[tex-show-print-queue] to show the print
- queue that \\[tex-print] put your job on.
-
-Entering SliTeX mode runs the hook `text-mode-hook', then the hook
-`tex-mode-hook', then the hook `latex-mode-hook', and finally the hook
-`slitex-mode-hook'. When the special subshell is initiated, the hook
-`tex-shell-hook' is run.
-
-(fn)" t)
-(autoload 'tex-start-shell "tex-mode")
-(autoload 'doctex-mode "tex-mode" "\
-Major mode to edit DocTeX files.
-
-(fn)" t)
-(register-definition-prefixes "tex-mode" '("doctex-font-lock-" "latex-" "plain-tex-mode-map" "tex-"))
-
-\f
-;;; Generated autoloads from textmodes/texinfmt.el
-
-(autoload 'texinfo-format-buffer "texinfmt" "\
-Process the current buffer as texinfo code, into an Info file.
-The Info file output is generated in a buffer visiting the Info file
-name specified in the @setfilename command.
-
-Non-nil argument (prefix, if interactive) means don't make tag table
-and don't split the file if large. You can use `Info-tagify' and
-`Info-split' to do these manually.
-
-(fn &optional NOSPLIT)" t)
-(autoload 'texinfo-format-region "texinfmt" "\
-Convert the current region of the Texinfo file to Info format.
-This lets you see what that part of the file will look like in Info.
-The command is bound to \\[texinfo-format-region]. The text that is
-converted to Info is stored in a temporary buffer.
-
-(fn REGION-BEGINNING REGION-END)" t)
-(autoload 'texi2info "texinfmt" "\
-Convert the current buffer (written in Texinfo code) into an Info file.
-The Info file output is generated in a buffer visiting the Info file
-names specified in the @setfilename command.
-
-This function automatically updates all node pointers and menus, and
-creates a master menu. This work is done on a temporary buffer that
-is automatically removed when the Info file is created. The original
-Texinfo source buffer is not changed.
-
-Non-nil argument (prefix, if interactive) means don't split the file
-if large. You can use `Info-split' to do this manually.
-
-(fn &optional NOSPLIT)" t)
-(register-definition-prefixes "texinfmt" '("batch-texinfo-format" "texinf"))
-
-\f
-;;; Generated autoloads from textmodes/texinfo.el
-
-(defvar texinfo-open-quote "``" "\
-String inserted by typing \\[texinfo-insert-quote] to open a quotation.")
-(custom-autoload 'texinfo-open-quote "texinfo" t)
-(defvar texinfo-close-quote "''" "\
-String inserted by typing \\[texinfo-insert-quote] to close a quotation.")
-(custom-autoload 'texinfo-close-quote "texinfo" t)
-(autoload 'texinfo-mode "texinfo" "\
-Major mode for editing Texinfo files.
-
- It has these extra commands:
-\\{texinfo-mode-map}
-
- These are files that are used as input for TeX to make printed manuals
-and also to be turned into Info files with \\[makeinfo-buffer] or
-the `makeinfo' program. These files must be written in a very restricted and
-modified version of TeX input format.
-
- Editing commands are like `text-mode' except that the syntax table is
-set up so expression commands skip Texinfo bracket groups. To see
-what the Info version of a region of the Texinfo file will look like,
-use \\[makeinfo-region], which runs `makeinfo' on the current region.
-
- You can show the structure of a Texinfo file with \\[texinfo-show-structure].
-This command shows the structure of a Texinfo file by listing the
-lines with the @-sign commands for @chapter, @section, and the like.
-These lines are displayed in another window called the *Occur* window.
-In that window, you can position the cursor over one of the lines and
-use \\[occur-mode-goto-occurrence], to jump to the corresponding spot
-in the Texinfo file.
-
- In addition, Texinfo mode provides commands that insert various
-frequently used @-sign commands into the buffer. You can use these
-commands to save keystrokes. And you can insert balanced braces with
-\\[texinfo-insert-braces] and later use the command \\[up-list] to
-move forward past the closing brace.
-
-Also, Texinfo mode provides functions for automatically creating or
-updating menus and node pointers. These functions
-
- * insert the `Next', `Previous' and `Up' pointers of a node,
- * insert or update the menu for a section, and
- * create a master menu for a Texinfo source file.
-
-Here are the functions:
-
- `texinfo-update-node' \\[texinfo-update-node]
- `texinfo-every-node-update' \\[texinfo-every-node-update]
- `texinfo-sequential-node-update'
-
- `texinfo-make-menu' \\[texinfo-make-menu]
- `texinfo-all-menus-update' \\[texinfo-all-menus-update]
- `texinfo-master-menu'
-
- `texinfo-indent-menu-description' (column &optional region-p)
-
-The `texinfo-column-for-description' variable specifies the column to
-which menu descriptions are indented.
-
-Passed an argument (a prefix argument, if interactive), the
-`texinfo-update-node' and `texinfo-make-menu' functions do their jobs
-in the region.
-
-To use the updating commands, you must structure your Texinfo file
-hierarchically, such that each `@node' line, with the exception of the
-Top node, is accompanied by some kind of section line, such as an
-`@chapter' or `@section' line.
-
-If the file has a `top' node, it must be called `top' or `Top' and
-be the first node in the file.
-
-Entering Texinfo mode calls the value of `text-mode-hook', and then the
-value of `texinfo-mode-hook'.
-
-(fn)" t)
-(register-definition-prefixes "texinfo" '("fill-paragraph-separate" "texinfo-"))
-
-\f
-;;; Generated autoloads from textmodes/texnfo-upd.el
-
-(register-definition-prefixes "texnfo-upd" '("texinfo-"))
-
\f
;;; Generated autoloads from emacs-lisp/text-property-search.el
\f
;;; Generated autoloads from transient.el
-(push '(transient 0 8 6) package--builtin-versions)
+(push '(transient 0 9 1) package--builtin-versions)
(autoload 'transient-insert-suffix "transient" "\
Insert a SUFFIX into PREFIX before LOC.
PREFIX is a prefix command, a symbol.
(fn PREFIX LOC SUFFIX)")
(function-put 'transient-replace-suffix 'lisp-indent-function 'defun)
+(autoload 'transient-inline-group "transient" "\
+Inline the included GROUP into PREFIX.
+Replace the symbol GROUP with its expanded layout in the
+layout of PREFIX.
+
+(fn PREFIX GROUP)")
+(function-put 'transient-inline-group 'lisp-indent-function 'defun)
(autoload 'transient-remove-suffix "transient" "\
Remove the suffix or group at LOC in PREFIX.
PREFIX is a prefix command, a symbol.
:custom Call `Custom-set' or `set-default' with each variable
definition without modifying the Emacs `custom-file'.
(compare with `custom-set-variables').
-:custom-face Call `custom-set-faces' with each face definition.
+:custom-face Call `face-spec-set' with each face definition.
:ensure Loads the package using package.el if necessary.
:pin Pin the package to an archive.
:vc Install the package directly from a version control system
(autoload 'vc-next-action "vc" "\
Do the next logical version control operation on the current fileset.
This requires that all files in the current VC fileset be in the
-same state. If they are not, signal an error. Also signal an error if
-files in the fileset are missing (removed, but tracked by version control),
-or are ignored by the version control system.
+sufficiently similar states. If they are not, signal an error.
+Also signal an error if files in the fileset are ignored by the VCS.
For modern merging-based version control systems:
If every file in the fileset is not registered for version
working revisions. With a prefix argument HISTORIC, it reads two revision
designators specifying which revisions to compare.
-The optional argument NOT-URGENT non-nil means it is ok to say no to
-saving the buffer. The optional argument FILESET can override the
-deduced fileset.
+Optional argument NOT-ESSENTIAL non-nil means it is okay to say no to
+saving the buffer.
+Optional argument FILESET, if non-nil, overrides the fileset.
-(fn &optional HISTORIC NOT-URGENT FILESET)" t)
+(fn &optional HISTORIC NOT-ESSENTIAL FILESET)" t)
(autoload 'vc-diff-mergebase "vc" "\
Report diffs between the merge base of REV1 and REV2 revisions.
The merge base is a common ancestor between REV1 and REV2 revisions.
working revisions. With a prefix argument HISTORIC, it reads two revision
designators specifying which revisions to compare.
-The optional argument NOT-URGENT non-nil means it is ok to say no to
+Optional argument NOT-ESSENTIAL non-nil means it is okay to say no to
saving the buffer.
-(fn HISTORIC &optional NOT-URGENT)" t)
+(fn HISTORIC &optional NOT-ESSENTIAL)" t)
(autoload 'vc-root-diff "vc" "\
Display diffs between VC-controlled whole tree revisions.
Normally, this compares the tree corresponding to the current
With a prefix argument HISTORIC, prompt for two revision
designators specifying which revisions to compare.
-The optional argument NOT-URGENT non-nil means it is ok to say no to
+Optional argument NOT-ESSENTIAL non-nil means it is okay to say no to
saving the buffer.
-(fn HISTORIC &optional NOT-URGENT)" t)
+(fn HISTORIC &optional NOT-ESSENTIAL)" t)
(autoload 'vc-root-dir "vc" "\
Return the root directory for the current VC tree.
Return nil if the root directory cannot be identified.")
(vc-svn-registered f))))
(register-definition-prefixes "vc-svn" '("vc-svn-"))
-\f
-;;; Generated autoloads from vcursor.el
-
-(register-definition-prefixes "vcursor" '("vcursor-"))
-
\f
;;; Generated autoloads from language/viet-util.el
Exit View mode and make the current buffer editable." t)
(register-definition-prefixes "view" '("View-" "view-"))
-\f
-;;; Generated autoloads from emulation/viper.el
-
-(push '(viper 3 14 2) package--builtin-versions)
-(autoload 'toggle-viper-mode "viper" "\
-Toggle Viper on/off.
-If Viper is enabled, turn it off. Otherwise, turn it on." t)
-(autoload 'viper-mode "viper" "\
-Turn on Viper emulation of Vi in Emacs. See Info node `(viper)Top'." t)
-(register-definition-prefixes "viper" '("viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-cmd.el
-
-(register-definition-prefixes "viper-cmd" '("viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-ex.el
-
-(register-definition-prefixes "viper-ex" '("ex-" "viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-init.el
-
-(register-definition-prefixes "viper-init" '("viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-keym.el
-
-(register-definition-prefixes "viper-keym" '("viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-macs.el
-
-(register-definition-prefixes "viper-macs" '("ex-" "viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-mous.el
-
-(register-definition-prefixes "viper-mous" '("viper-"))
-
-\f
-;;; Generated autoloads from emulation/viper-util.el
-
-(register-definition-prefixes "viper-util" '("viper"))
-
\f
;;; Generated autoloads from leim/quail/viqr.el
projects / emacs.git / commitdiff